apollo XSBF223 Camp Bluetooth Speaker with Flashlight and Lantern User Guide
- June 15, 2024
- APOLLO
Table of Contents
apollo XSBF223 Camp Bluetooth Speaker with Flashlight and Lantern User
Guide
XSBF223
Overview
Buttons and functions:
X :Torch
X. Adjustable hanger
X. Long press Power ON&OFF/short press torch and lighting control
X.USB charging port
X.LED indicator
X. Solar Panel
Charging the device:
Charge the device with the included micro USB cable for 3-5 hours.
The charging LED indicator will light white icker during charging and steady
on after fully charged.
Bluetooth connection:
Long press the Power ON/OFF button more than 3 seconds, the speaker will power ON,enter pairing mode.
The bluetoothindicator will be quick icker
Enable Bluetooth search mode on your mobile device and
search for pairing name “XSBF223” and select it on your mobile phone.
Once the speaker is successfully paired, the Bluetooth LED indicator will be slowly icker, around 3 seconds per time icker.
Lighting and Torch:
Specifications
Safety Notices:
Read the following recommendations before using the Bluetooth speaker.
a) Keep it dry and don’t take it to damp places to avoid the product’s
internal circuit being aected
b) Don’t expose the product to extremely cold area. It may damage the internal
circuit board.
c) Don’t try to disassemble the product as it may get damaged if you are not
professional.
d) Don’t try to disassemble the product as it may get damaged if you are not
professional
e) Don’t use intensive chemical products or detergent to clean the product.
f) Don’t scratch the surface with sharp tips.
G) the solar input is not strong, if you can charge this device, we prefer to
suggest you charge by cable instead of solar, solar charging will take a long
time.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 1 5 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 1 5 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>