SECRT STD2M Video Doorbell with Screen User Guide

SECRT STD2M Video Doorbell with Screen User Guide

Package List

Please check and make sure the video doorbell is in good condition and all below parts are included after opened the package.

• Video Doorbell

• Security Screw

• Double-sided sticke

• 15°Bracket (Optional)

• Bracket

• Quick Start Guide

• Wireless Chime(Optional)

Features

1. Wide-angle Lens
2. Light Sensor
3. Infrared Lights
4. Motion Sensor
5. Microphone
6. Message Screen
7. Doorbell Button
8. Button Led Light
9. Speaker
10. USB-C Port(Battery Charging)
11. Charging Light
12. TF Card Slot
13. Power Button
14. Reset Button

Button and Indicator Light

Red & Blue light flashes-Pairing Status.
Blue light on —- Connected Successfully.
Red & Blue light on together —- Connecting WI-FI.
On screen display – — Low battery. Show user’ message.
Red charging light on   — The device is charging
Blue charging light on   — The device is fully charged
Power button — Pressing 5seconds for turn on / turn off.
Reset button — Pressing 5seconds, waiting lamp flashing.

Set up your Video Doorbell

Unscrew the screws to remove the device. Press and hold the power button for 5 seconds, The device starts to work.

Download and install Tuya-smart App
Scan the QR code below or search for Tuya-smart on the Apple App Store or Google Play. Download and install the app.

Create an Tuya-smart account in App

Step
Open the Tuya-smart app and tap Sign Up. In the User Agreement and Privacy Policy dialog box, carefully read the privacy policy and agreement and tap Agree to go to the account registration page.

Step 2
Enter your mobile phone number or email address and tap Get Verification Code. The country or region on the regstration page is the same as that you set in the mobile phone. You can also manually change the country of region before registration.

Step 3
On the Enter Verification Code page, enter the verification code. On the *Set Password” page, follow the instructions to set the password, then click “Done’.

Step 4

1. Open the Tuya-smart app. If you have registered an account in the Tuya- smart app, tap Log In. In the User Agreement and Privacy Policy dialog box, carefully read the privacy policy and agreement and tap Agree to go to the login page.
2. Check the country or region on the login page. The system automatically identifies your current country or region. You can also manually select a country or region.
3. Enter your registered email address, enter the password, and then tap Login.

Reset password

If you forget yourlogin password, you can reset the password based on the following process.

1. On the Log I page, tap Forgot Password.

2. On the page that appears, check the country or region Enter your regist ered emal aress and tap Get Verification Code.

3. On the Enter Verification Code page, enter the verification code.
   

4. On the Enter Verfication Code page, enter the veriication code.

5. On the page that appears, enter a new password and tap Done. Then the password i reset, and you automatically log n to the app.

6. For security concems the app wil detect risks in your phone system during login. I the app etects a root or jail reaking risk, a security reminder is displayed. You can deterine whether to exit the app or o f o selecion is made, the app wil automatially exit.
   

Enter experience mode

1. Open the Tuya-smart app and tap Try now. A dialog box appears, indicating that cloud storage, third-party voice control, and device sharing are not sup ported in the experience mode.
2. Tap Continue The Home page appears.
   

Set up your device in the Tuya-smart app.

To pair your device, follow the steps below and in-app instructions.

1. Open Tuya-smart App and log in to your account.

2. On the device list page, click the “Add Device” button in the center or click the “+” button at the top right to enter the “Add Device” page.

3. Select “Smart Doorbell (Dual Band)”, Add device manually-QR code pairing
   

4. To use the QR code to configure the network, you need to set the indicator light of the IPC device to a fast lashing state or hear the corresponding prompt tone.

5. The reset stps can be viewed by cicking e “Reset Device tep by Step” button.

6. After cicking Next you wil be token to the page or etering the Wi-i password.

7. According to the prompts onthe page face the QR code directly to the camera and keep a isance of 15-20cm urtlyou hear a prompt sound from the camera.
   

8. If you hear the prompt tone, please clckthe “Hear the prompt tone” button below o enter the page for adding devices

9. If the network configuration ks th folowing page willbe isplayed.
   

Message screen function.

1. After connecting the device, select the “Message Editing menu, input digital and English information and send it to the device display screen.
2. When the battery power is lower than the set value, the display screen will display a low power prompt.
   

Attention!!

1. This device usesfihium polymer battery for power supply.Is etimted that it can wake up 2000 times when fully Frequent wake-up vil reduce use time When the battery votage i nsffient,there s a prompt on the mobie phone app and device cisplay. Please charge the device in tme after receiving the prompt.
2. During nsallaion, please ensure that the network s norml n the instalation environment When nstalled outdoors, check whether the Wifisignal s cove: vedt Ifthe W-Fi ignal i weak, add a Wi-i signal ampifier
3. The device is alow-powerineligent product, which s remote ) e p, PR human pieiciborririets i Ao After each wake-up, it wil automatically enter the sleep state after working for 30 seconds.

Install your Video Doorbell

Step 1

Step 2

Step 3
Press the “Next and Play” buttons at the same time unti the devic ights up thered indicator (about 10 seconds). Afer the Chirme red liht comes on, the Doorbell Button to start paring,aftr the pairng is successful, the Chime ed ight tums oft.

Step 4
Press the Doorbell Button again to veriy the chime and doorbellwork property.

Volume adjustment There are fou levels of volume adjustment.Press the “next” and *playing’ buttons at the same fime to increase the volume by one level.
Transmission distance: 30 meters without blocking.

Other contents

Technical Specification

Function Introduction

The screen supports message display and low battery prompt

Two 18650 specification batteries work regularly. for 5-8 months

Million HD Pixels with Ultra-thin 2.6MM Wide-Angle Lenses

Support waking up device by mobile phone within 1 second

246/56 Wi-Fi connection

High quality two-way talk with noise cancellation

Support IR human body infrared dtection It wil push alarm information to your mobile phonie APP. immediately when someone is at the door

Day and night mode can be swtched automaical.
The image i clearly and visible for your safety an family security no matter its day or night.

Q8A

Q: The device cannot connect to WIFI?

A: 1. Please confirm that the wireless network to be connected is the 2.4G/5G protocol. 2. Make sure the device voice prompt is in pairing state. 3. The password is correct, make sure there is no extra spaces.

Q: The device is online and there is a trigger event, but the mobile phone

cannot receive the push message?

Q: What power supply mode does the device support?

A: You can charge the device through USB-C.

Warning:

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

RF Exposure Statement
To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>