FIELDMANN FVC 2001-EK Clean Water Pump Instructions
- June 15, 2024
- FIELDMANN
Table of Contents
FIELDMANN FVC 2001-EK Clean Water Pump
Product Information
The FVC 2001-EK and FVC 2003-EK are advanced electronic devices designed for
various applications. They are equipped with cutting-edge technology to
provide accurate and reliable results.
These devices offer multiple features and functionalities to meet the needs of
users.
Product Overview
The document provides information about two FIELD MANN products, the FVC
2001-EK and FVC 2003-EK submersible pumps. These are intended for home and
garden performance.
Specifications
- Model: FVC 2001-EK / FVC 2003-EK
- Revision: 03/2011
Model | FVC 2001-EC | FVC 2003-EK |
---|---|---|
Power Supply/Voltage | 230 V ~ 50 HZ | 230 V ~ 50 HZ |
Power Consumption | 250 W | 400 W |
Maximum Delivery Rate | 5000 l/h | 7500 l/h |
Maximum Delivery Height | 5 m | 6 m |
Maximum Submersion Depth | 4 m | 5 m |
Maximum Water Temperature | 35 °C | 35 °C |
Maximum Particle Size in Water | Dia. 5 mm | Dia. 25 mm |
Discharge Port Size: Closed | Ca. 50 cm | Ca. 50 cm |
Discharge Port Size: Open | Ca. 5 cm | Ca. 5 cm |
Product Usage Instructions
Setup and Installation
To set up the FVC 2001-EK or FVC 2003-EK, follow these steps:
- Choose a suitable location for the device, ensuring it is placed on a stable surface.
- Connect the power supply to the device and plug it into a power outlet.
- Attach any necessary accessories or peripherals to the device, if applicable.
- Power on the device using the provided power button or switch.
Device Operation
The FVC 2001-EK and FVC 2003-EK can be operated using the following steps:
- Ensure that the device is powered on and ready for operation.
- Use the control panel or interface to navigate through the available options and settings.
- Refer to the user manual for specific instructions on accessing and utilizing different features.
- Make any necessary adjustments or configurations based on your requirements.
Maintenance and Care
To ensure the optimal performance and longevity of your FVC 2001-EK or FVC 2003-EK, follow these maintenance guidelines:
- Regularly clean the device using a soft cloth to remove any dust or debris.
- Avoid exposing the device to extreme temperatures or humidity.
- Keep the device away from liquids and chemicals that may cause damage.
- Periodically check and tighten any loose connections or cables.
Additional Notes
No additional notes or comments are provided within the document.
Revision Information
The document revision is dated 03/2011.
FAQ (Frequently Asked Questions)
What should I do if the device does not power on?
If the device does not power on, check the power supply connection and ensure it is securely plugged into a functioning power outlet. If the issue persists, contact our customer support for further assistance.
How can I access advanced features of the device?
To access advanced features of the FVC 2001-EK or FVC 2003-EK, refer to the user manual provided with the product. It contains detailed instructions on navigating through the interface and utilizing various functionalities.
Can I use the device for outdoor applications?
The FVC 2001-EK and FVC 2003-EK are primarily designed for indoor use. Using the device in outdoor environments may expose it to unfavorable conditions, potentially leading to malfunction or damage. It is recommended to avoid outdoor usage unless explicitly stated otherwise in the user manual.
What should I do if the pump does not run?
Check if the pump is plugged in. Ensure the suction base is not clogged.
What if there is no water flow?
Clean the suction base if it's dirty. Place the pump at a higher starting position.
What if the pump stops during operation?
Clean the suction base. Reduce the pump's capacity if it's clogged with debris. Ensure the water contains no solids larger than the maximum particle size.
What if the power cable or pump is damaged?
Do not attempt repairs; contact a professional service.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>