Daske Shuttle Corner Shower Shelf Instruction Manual
- June 1, 2024
- Daske
Table of Contents
Daske Shuttle Corner Shower Shelf
Mounting Instructions
Specifications
| Component | Quantity |
|---|---|
| A (Screw) | x4 |
| B (Bolt) | x4 |
| C (Nut) | x4 |
| D (Bracket) | x4 |
Step-by-Step Guide
Step 1: Attaching the Brackets
Align the brackets (D) with the holes located at the bottom of the shelf. Secure each bracket using screws (A).
Step 2: Preparing for Installation
- Use a drill to make pilot holes where the shelf will be mounted.
- Please ensure to wear protective gear and follow safety instructions when using power tools.
- Warning: Do not drill into electrical wiring or pipes.
- Notice: Use the appropriate drill bit size for the screws (A).
- Caution: Ensure the wall can support the weight of the shelf.
Step 3: Mounting the Shelf
With the brackets (D) attached, align the shelf against the wall, ensuring that it is level. Insert bolts (B) through the brackets and secure them with nuts (C).
Frequently Asked Questions (FAQ)
- What tools are needed for installation?
- A drill, a screwdriver, and a level are recommended for accurate installation.
- Can I install the shelf on any wall type?
- You should ensure the wall is capable of supporting the shelf’s weight. Specialized hardware may be required for certain wall types such as drywall or masonry.
- What should I do if I encounter electrical wiring or pipes?
- Stop immediately and consult a professional. Do not attempt to drill or cut into these areas.
Mounting Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>