sleep number Smart Skirt Smart Bed Instruction Manual
- June 3, 2024
- sleep number
Table of Contents
sleep number Smart Skirt Smart Bed
INSTALLATION INSTRUCTIONS
-
Unfold and stretch the Smart™ Skirt around your mattress, creating a U shape with the ends of the skirt at the head of the bed. The long piece of elastic will stretch across the head of the mattress.The ends of the skirt are labeled L and R. The end labeled L belongs on the left side of the bed when you’re standing at the foot of the bed facing the bed. These labels should be onthe inside of the skirt, not visible once installation is complete.
Note : The Smart™ Skirt is designed for use on a bed base; this step is the only time it should be used directly on your mattress -
Raise the head and foot of your FlexFit™ adjustable base. Starting at the head of the bed, slip the Smart™ Skirt from the mattress down onto the bed base, below the adjustable base deck. The elastic band should run securely across the outside head portion of the bed base. Fit the corners of the bed skirt snugly over the corners of the base, first at the head, then at the foot.
-
Starting on one side at the head of the bed, tuck in the 2.5″ fabric border between the bed base and the adjustable deck all the way around the bed so the top seam is flush with the base. The corners of the skirt should fit snugly on all corners of the bed base.
Note : If you have a FlexFit™ 1 smart adjustable base, you’ll need to manually lift the foot of the adjustable deck. This may require two people — one person to lift and hold up the deck and one person to tuck in the bed skirt border between the bed base and adjustable deck -
You’ll notice a fabric flap centered on each side of the Smart™ Skirt. Tuck it in between the skirt fabric and the base so it’s not visible. These flaps are not needed on an adjustable base. Your Smart™ Skirt installation is now complete.
**on a Sleep Number 360® smart bed with an integrated base and all
other bases**
-
Unfold and stretch the Smart™ Skirt around your mattress, creating a U shape with the ends of the skirt at the head of the bed. The long piece of elastic will stretch across the head of the mattress. The ends of the skirt are labeled L and R. The end labeled L belongs on the left side of the bed when you’re standing at the foot of the bed facing the bed. These labels should be on the inside of the skirt, not visible once installation is complete.
Note : The Smart™ Skirt is designed for use on a bed base; this step is the only time it should be used directly on your mattress. -
Starting at the head of the bed, slip the Smart™ Skirt from the mattress down onto the bed base. The elastic band should run securely across the outside head portion of the bed base. Fit the corners of the bed skirt snugly over the corners of the base, first at the head, then at the foot.
-
Starting on one side at the head of the bed, tuck in the 2.5″ fabric border, including the flap on each side, between the mattress and base all the way around the bed so the top seam is flush with the base. The corners of the skirt should fit snugly on all corners of the bed base
-
Your Smart™ Skirt installation is now complete
©2022 Sleep Number Corporation Minneapolis, MN