JBL HKGOPLAY3 Portable Bluetooth Speaker Instructions
- June 15, 2024
- JBL
Table of Contents
JBL HKGOPLAY3 Portable Bluetooth Speaker Instructions
Download the full warranty Card and safety information and other helpful information from our website: www.jbl.com/warrantyandsafetybooks
IMPORTANT SAFETY INSTRUCTIONS
For all products:
- Read these
- Keep these
- Heed all
- Follow all
- Clean only with a dry
- Do not block any ventilation Install this apparatus in accordance with the manufacturer’s instructions.
- Do not install this apparatus near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers)that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exitfrom the apparatus.
- Use only attachments/accessories specified by the
- Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of
- Refer all servicing to qualified service Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
- To disconnect this apparatus from the AC mains completely, disconnect the power- supply cord plug from the AC
- The mains plug of the power-supply cord shall remain readily
- This apparatus is intended to be used only with the power supply and/or charging cable provided by th
The following instructions may not apply to waterproof devices. Refer to your device user manual or quick start guide for more waterproof instruction if any.
- Do not use this apparatus near
- Do not expose this apparatus to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
THIS SYMBOL ON THE PRODUCT MEANS THERE IS UNINSULATED, DANGEROUS VOLTAGE
WITHIN THE PRODUCT ENCLOSURE THAT MAY PRESENT A RISK OF ELECTRICAL SHOCK.
THIS SYMBOL ON THE PRODUCT MEANS THERE ARE IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THIS GUIDE.
CAUTION FCC AND IC STATEMENT FOR USERS (USA AND CANADA ONLY)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAN ICES-3(B)/NMB-3(B)
FCC SDOC SUPPLIER’S DECLARATION OF CONFORMITY
HARMAN International hereby declares that this equipment is in compliance with
the FCC Part 15 Subpart B.
The declaration of conformity may be consulted in the support section of our
Web site, accessible from www.jbl.com
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving
- Increase the separation between the equipment and
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
- Consult the dealer or an experienced radio/TV technician for Caution: Changes or modifications not expressly approved by HARMAN could void the user’s authority to operate the equipment.
- For Products That Transmit RF Energy:
- FCC AND IC INFORMATION FOR USERS
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.
- FCC/IC Radiation Exposure Statement
This equipment complies with FCC and ISED radiation exposure limits set forth
for an uncontrolled environment.
In case this equipment has to subject to FCC/IC SAR (Specific Absorption Rate)
exposure test, this equipment is designed to meet the requirements for
exposure to radio waves established by the FCC and ISED. These requirements
set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR
value reported under this standard during product certification for use when
properly worn on the body or on the head, with no separation. Tomeet RF
exposure guidelines and reduce exposure to RF energy during the operation,
this equipment should be positioned at least this distance away from the body
or the head.
For radio equipment operates in 5150-5850MHz
FCC and IC Caution:
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and
5.65 to 5.85 GHz bands. These radar stations can cause interference with
and/or damage to LE LAN (Licence-Exempt Local Area Network) devices. No
configuration controls are provided for this wireless equipment allowing any
change in the frequency of operations outside the FCC grant of authorization
for US operationaccording to Part 15.407 of the FCC rules.
IC Caution:
User should also be advised that:
- The device for operation in the band 5150 – 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250 – 5350 MHz and 5470 – 5725 MHz shall comply with the i.r.p. limit: and
- The maximum antenna gain permitted for devices in the band 5725 – 5825 MHz shall comply with the i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
Use Restriction Attention in European Union, operation is limited to indoor use within the band 5150-5350 MHz.
Correct disposal of this product (Waste Electrical & Electronic Equipment)
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product.
This product is RoHS compliant.
This product is in compliance with Directive 2011/65/EU, and its amendments,
on the restriction of the use of certain hazardous substances in electrical
and electronic equipment.
REACH
REACH (Regulation No 1907/2006) addresses the production and use of chemical
substances and their potential impacts on human health and the environment.
Article 33(1) of REACH Regulation requires suppliers to inform the recipients
if an article contains more than 0.1 % (per weight per article) of any
substance(s) on the Substances of Very High Concern (SVHC) Candidate List
(‘REACH candidate list’). This product contains the substance “lead”(CAS- No.
7439-92-1) in a concentration of more than 0.1% per weight.
At the time of release of this product, except for the lead substance, no
other substances of REACH candidate list are contained in a concentration of
more than 0.1% per weight in this product.
Note: On June 27, 2018, lead was added to the REACH candidate list.
The inclusion of lead in the REACH candidate list does not mean that lead-
containing materials pose an immediate risk or results in a restriction of
permissibility of its use