sunmi K2 Mini Based Dual Screen Desktop User Manual

sunmi K2 Mini Based Dual Screen Desktop

Product Information

Specifications

• Model: F4503
• Model: F4504
• Frequency:
  • 2402-2480MHz (TX/RX)
  • 5150-5250MHz (TX/RX)
  • 5250-5350MHz (TX/RX)
  • 5470-5725MHz (TX/RX)
  • 5725-5850MHz (TX/RX)
  • 13.56MHz (TX/RX)
• Power Output:
  • 2402-2480MHz: 5.49dBm
  • 5150-5250MHz: 1.87dBm
  • 5250-5350MHz: 19.29dBm
  • 5470-5725MHz: 20.84dBm
  • 5725-5850MHz: 19.87dBm
  • 13.56MHz: 19.98dBm
• NFC Frequency: 13.56MHz (TX/RX)
• Adapter: CYSE65-240250

Product Usage Instructions

Installation
This equipment should be installed with a minimum distance of 20cm between the radiator and your body.

RF Exposure Statement
This equipment complies with the EU, FCC, and IC RSS-102radiation exposure limits set forth for an uncontrolled environment.

Disposal
At the end of the product life cycle, do not dispose of the product with normal household waste. Please take the waste equipment to designated collection points, return it to the  distributor when purchasing a new product, or contact your localauthority representative for detailed information on WEEE recycling.

EU Representative

SUNMI France SAS
186, avenue Thiers, 69006 Lyon, France

FCC Compliance Statement

Only for EU Mode/Band

FAQ

Q: What is the model number of this product?
A: The model number of this product is F4503 (for Model F4503) or F4504 (for Model F4504).

Q: What is the frequency range of this product?
A: The frequency range of this product is as follows:

• 2402-2480MHz (TX/RX)
• 5150-5250MHz (TX/RX)
• 5250-5350MHz (TX/RX)
• 5470-5725MHz (TX/RX)
• 5725-5850MHz (TX/RX)
• 13.56MHz (TX/RX)

Q: What is the power output of this product?
A: The power output of this product varies depending on the frequency range. Here are the power output values:

• 2402-2480MHz: 5.49dBm
• 5150-5250MHz: 1.87dBm
• 5250-5350MHz: 19.29dBm
• 5470-5725MHz: 20.84dBm
• 5725-5850MHz: 19.87dBm
• 13.56MHz: 19.98dBm

Quick Setting

Only several steps to enable the smart commercial device K2 MINI:

• After turning on the complete machine power supply, the screen will be lit. Then you will enter the first boot interface and just simply operate according to the instructions.
  There are two types of internet mode available for you.

• LAN setting
  After plugging the network cable correctly, click “Setting” and “Wired Network” to choose Enable. Access password is required for an encrypted network connection.
  As for IP address, there are two options: to automatically obtain IP or to manually enter IP address.

• Wi-Fi setting
  Click “Setting” and “WLAN” to enter the WLAN search interface. Wait for the available WLAN hot spots searching and listing. Click the right WLAN to connect to the network.
  Access password is required for an encrypted network connection.

How to download/use App
The Self-Checkout Kiosk is applicable for the cashier environment of commercial customers in various industries, such as convenience stores, department stores, catering,self service ticketing, livelihood services, etc. Please turn on the Kiosk and search & download the relevant Apps on the App market on Internet.

• Facebook: Sunmitech
• LinkedIn: SUNMI Technology

Please read the internal machine help App for more help or call 400-6666-509 for free telephone services.

Brief Introduction of K2 MINI

Based on Dual screen desktop

• System switch
  In standby state, short press to boot, short press again to be in standby mode; In service state, long press for 2 to 3 seconds to choose to shut-down or restart; In the state of power-on,long press for 11 seconds to shut down the host.

• USB interface
  For cash box, keyboard,scanner etc.

• Receipt printer
  Used to print receipt.

• Indicator light
  Indicate different status of kiosk.

• 3D camera with structured light
  Used for Face-ID verification,Payment.

• Main screen
  For customer usage.

• Code scanner
  Support commodity barcode & payment QR code.

• Secondary screen (optional)
  For saleperson Usage.

• Hidden line cover
  Cover the cable plugs.

• Cash drawer interface
  Used for external cash drawer, output 120ms electric pulse, will not continuously supply power; Only supports 24V/1A cash drawer.

Installation

Installation Steps of 58mm Thermal Paper Roll

1. Open paper storage cover
   Pull the printer cover outside and it will pop open automatically.

2. Load print paper roll
   Put in the 58mm thermal sensitive paper and pull out a section outside the printer exit.

Installation Steps of 80mm Thermal Paper Roll

1. Open paper storage cover
   Pull the printer cover outside and it will pop open automatically.

2. Remove the front stop of the paper roll
   Push back the two buckles at the bottom and lift up.

3. Remove Paper roll separator
   Pull out two paper roll separators.

4. Load the front stop of the paper roll
   Put it down into the slot and push it backwards.

5. Load print paper roll Put in the 80mm thermal sensitive paper and pull out a section outside the printer exit.

Print Paper Misoperation

Troubleshooting for Cutter Issue

1. First open the cutter cover and remove the cutter cover.
2. Turn the cutter knob downwards until the cutter is released.

Installation Steps of Wall-mounted

1. Arranging electrical outlets
   Arrange 86-size three-hole power supply and network port socket according to the above dimensions.

2. Installing wall screws
   According to the above dimensions, Punch 3 holes in the wall 8×80; Put in the plastic expansion tube and install 3 M5 screws,reserved 3mm length.

3. Installing the wall mount bracket
   Use 4pcs M4 screws fix to the host.

4. Installing the retainer plate
   Use 2pcs M6 screws fix to the host.

5. Patch cables
   Pass the power cable and network cable through the opening of the host, and plug it in.

6. Fixed host
   Hang the host on 2pcs M5 screws and tighten the screws.

7. Install the adapter box
   Plug the power and network cables into the wall socket;
   Put the power adaper into the box;
   Fix the box onto the host.

8. Load print paper roll
   Open the printer cover and load the paper roll.

Common Troubleshooting

Only for EU：

 | Mode/Band| Frequency| Power（dBm）|
---|---|---|---|---
BT| 2402-2480MHz(TX/RX)| 5.49
BLE| 2402-2480MHz(TX/RX)| 1.87
2.4G Wi-Fi| 2412-2472MHz(TX/RX)| 19.29

5G Wi-Fi

| 5150-5250MHz(TX/RX)| 20.84
5250-5350MHz(TX/RX)| 19.87
5470-5725MHz(TX/RX)| 19.98
5725-5850MHz(TX/RX)| 13.97
 | NFC| 13.56MHz(TX/RX)| 17.38dBuA/m@3m|

Parameters of Complete Machine

Package packing List of K2 MINI Host

CAUTION:

• Do not ingest battery, Chemical Burn Hazard.
• This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the productand keep it away from children.
• If you think batteries might have been swallowed or placed inside any partof the body, seek immediate medical attention.
• Risk of explosion if the battery is replaced by an incorrect type.
• Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types).
• Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.
• Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flam- mable liquid or gas.
• Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.
• Dispose of used batteries according to the instructions.
• Adapter: CYSE65-240250
• Jiangsu Chenyang Electron Co., Ltd.

Table for Names and Content Identification of Toxic and Hazardous Substances in this Product

O: indicates that the content of the toxic and hazardous substance in all homogeneous materials of the component is below the limit specified in SJ/T 11363-2006.
X: indicates that the content of the toxic and hazardous substance in at least one homogeneous material of the component exceeds the limit stipulated in SJ/T 11363-2006. However, as for the reason, because there is no mature and replaceable technology in the industry at present.

The products that have reached or exceeded environmental protection service life should be recycled and reused according to the Regulations on Control and Management of Electronic Information Products, and should not be discarded randomly.

Product warranty card

• Product Name:
• Product model:
• Product No.:
• Date of purchase:
• Warranty period: from the date of purchase, our company provides_ day warranty service.

Contact information:

• Company address:
• Contact number:

Free warranty is not available for:

• Dismantle and repair the product without permission.
• The bar code and fragile stickers of the product are damaged, and the warranty card is altered or incomplete.
• Failure to operate the equipment in accordance with the instructions.
• Artificial damage caused by failure, scratch or damage due to water inflow or falling.
• Failure or damage caused by force majeure.
• Beyond the warranty period.

RF Exposure Statement
This emuinment comnies with ElECC and C BSS-102 radiation eynosure imits set forth for an uncontrolled environment
This equipment complies with EU, FCC and IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Points for Attention

Safety warning
Please plug the AC plug into the AC socket corresponding to the identifcation input on the power adapter of the accessory;

• It is strictly forbidden to use it at a site with the existence of any potential explosive gas;
• Risk of fire or explosion if the battery is replaced by an incorrect type;
• This is a professonal equipment,so no-professionals are not allowed to open the internal module at will, to avoid danger.
• This is a A grade product. In the living environment, this product may cause radio interference.
  In this case, the user maybe required to apply feasible measures against the interference.

Points for attention about the power supply

• Please unplug the plug from the power supply AC socket to completely disconnect the power supply connection of the device;
• The power supply socket should be installd near the device, and be easy to contact.

Important Safety Instructions

• Avoid it to be installed or used during the thunder & lightning period, otherwise there will be risk of being electrically shocked by it;
• When you have discovered unusual odor, overheat or smog, please cut off the power supply at once!
• The paper knife is relatively sharp,please don’t touch it!

Suggestions

• Do not use it near the water or in the humid environment, to prevent the liquid from dropping into the terminal;
• Do not use it in extreme cold or hot environment. For example: near the ignition source or lighted cigarette;
• Do not drop, throw or bend it;
• Try best to use it in clean and dust-free environment, to prevent small items from dropping into the terminal;
• Do not use it nearby the medical devices when not allowed.

Suggestions

• Do not use it near the water or in the humid environment, to prevent the liquid from dropping into the terminal;
• Do not use it in extreme cold or hot environment. For example: near the ignition source or lighted cigarette;
• Do not drop, throw or bend it;
• Try best to use it in clean and dust-free environment, to prevent small items from dropping into the terminal;
• Do not use it nearby the medical devices when not allowed.

ISED Canada compliance statements
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems;

FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device nay not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

EU regulatory conformance
Hereby, Shanghai Sunmi Technology Co., Ltd. declares that this device is in compliance with Directive 2014/53/EU and RoHS Directive 2011/65/EU and its amendment directives (EU) 2015/863. The full text of the EU declaration of conformity is available at the following internet address:https://developer.sunmi.com/docs/read/en-US/maaeghjk480

INFORMATION ABOUT THE SOFTWARE
The description of accessories and components, including software, which allow the radio equipment to operate as intended, can be obtained in the full text of the EU declaration of conformity at the following internet address: https://developer.sunmi.com/docs/read/en-US/maaeghjk480

RESTRICTIONS OF USE
5150-5350MHz only be used by indoor.

EU Representative :SUNMI France SAS
186,avenue Thiers,69006 Lyon,France
This symbol means that it is forbidden to dispose the product of with normal household waste. At the end of the product life cycle, waste equipment should be taken to designated collection points, returned  to the distributor when purchasing a new product, or contact yourlocal authority representative for detailed information on WEEE recycling.

References

• developer.sunmi.com/docs/read/en-US/maaeghjk480

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>