attwood 15700-3 Clamp On Seat Mount with Swivel Instruction Manual
- June 15, 2024
- attwood
Table of Contents
attwood 15700-3 Clamp On Seat Mount with Swivel
INSTALLATION INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Form number 69589 Rev. A
- For boats with a bench seat depth from 7.5″ to 18″
CAUTION
Tighten all screws and nuts securely before use.
CAUTION
Tighten all screws and nuts securely before use.
CAUTION
Remove Clamp-On Seat Mount when trailering.
INSTALLATION
-
Mount seat onto swivel. Requires four fasteners, not included.
-
Position the clamp-on boat seat swivel mount on bench seat and keep the swivel in the center.
-
Tightly fasten the thumb nuts in front and back to ensure the seat won’t flip over.
Example of installed product
MAINTENANCE
Periodically check thumb screws to make sure they are secure.
Customer Support
ATTWOOD STANDARD 1-YEAR WARRANTY
See product catalog or attwoodmarine.com for
details.
©2020 Attwood Corporation, Lowell, MI 49331 •
attwoodmarine.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>