Attwood Marine 99DFPVAB1S Deck Fill f/Pressure Relief Systems User Guide
- June 9, 2024
- Attwood Marine
Table of Contents
Marine 99DFPVAB1S Deck Fill f/Pressure Relief Systems
FUEL
Deck Fills for Pressure Relief Systems
EPA Certified / CARB Approved
- Essential component of Vapor Tec and Secure Stop
- Dual 1 psi diurnal emission control overpressure relief safety valves
- Triple high-flow vacuum valves ensure maximum make-up air flow with minimum vacuum restriction
- Designed and tested to prevent water from entering the fuel system
- Automatic nozzle shutoff 4–18 gpm
- Hinged audible click cap meets EPA requirements
- Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards
- Designed and tested to prevent water from entering the fuel system
- Compatible with Ethanol blended fuels
- Fits 1-1/2″ fill hose and 5/8″ vent hose
Description| Body| Cap Material| Cap Design| **OEM Part
**
---|---|---|---|---
Deck fill for Pressure Relief System| Straight| Black Plastic| Scalloped|
99DFPVSB1
Chrome| Scalloped| 99DFPVSZ1
Stainless Steel| Scalloped| 99DFPVSS1
Stainless Steel| Y1 Flat| 99DFPVSSY1-1
Angled| Black Plastic| Scalloped| 99DFPVAB1
Chrome| Scalloped| 99DFPVAZ1
Stainless Steel| Scalloped| 99DFPVAS1
Stainless Steel| Y1 Flat| 99DFPVASY1-1
|
---|---
Fuel Demand Valve
The integrated fuel demand valve, used in conjunction with integrated fuel
systems eliminates pressurized fuel from reaching fuel distribution lines and
your engine and ensures that fuel is provided to the engine on demand rather
than as a result of pressure in the tank.
Additional features include:
- Compatible with Ethanol blended fuels
- Eliminates the need for rigid fuel distribution lines in pressure relief systems (per ABYC H-24.15.9)
Specifications
Operating Temp| Storage Temp| Operating Input Pressure| Flow
Performance| Manual Override
---|---|---|---|---
-20˚C to 80˚C
(-4˚F to 176˚F)| -40˚C to 80˚C
(-40˚F to 176˚F)| 138 kPa (20 psi) protected
for 276 kPa
(40 psi) psi pressure spike| 200 L/H (53 GPH) at <2 kPa*| Yes
*Flow performance of 99IFDV00-1 with 1/2″ Pick up tube and 99DVB02-1 Barb. Other factors such as fuel lift height, anti-siphon valve, fuel hose diameter and length and fuel filter will effect overall flow performance to engine.
| Description | OEM Part # | Part # |
|---|---|---|
| Integrated Fuel Demand Valve (IFDV) | 99IFDV00-1 | — |
| Base for Aluminum Tank | 99DVA02-1 | — |
| Pick-Up Tube Barb with O-Ring 3/8″ | 99DVB01-1 | — |
| Pick-Up Tube Barb with O-Ring 1/2″ | 99DVB02-1 | — |
| IFDV Installation Clip | 99DVC01-1 | — |
| IFDV Plug Cap with Seal | 99DVP03-1 | — |
| Heat Shield | 99IFDVHS1 | — |
| Single Flange Base for Plastic Tank | 99DVP05-1 | — |
Documents / Resources
|
Attwood Marine 99DFPVAB1S Deck Fill f/Pressure Relief
Systems
[pdf] User Guide
99DFPVAB1S Deck Fill f Pressure Relief Systems, 99DFPVAB1S, Deck Fill f
Pressure Relief Systems, Pressure Relief Systems, Relief Systems
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>