attwood 500 GPH Bilge Pump and Installation Kit Installation Guide
- June 9, 2024
- attwood
Table of Contents
500 GPH Bilge Pump & Installation Kit
5614-7
NEW/NOUVEAU
500 GPH Bilge Pump and Installation Kit
ELIMINATES AIR LOCKS
- The easiest, most reliable non-automatic bilge pump ever designed
Installation Kit Includes
- Attwood Tsunami Mk2 500 GPH Pump
- Washer / Non Return Valve
- 90° Outlet
- Straight Outlet
- 3/4″ x 5′ Pump Hose
- 3/4″ Thru-hull fitting
- 2-way on/off switch with bezel plate
- Snap-It hose clamps
- Wire Kit
- Installation Kit
12-VOLT SPECIFICATIONS :
| ABYC Specifications 13.6-volts DC
(6PH=6allons Per Hour)| ISO Specifications 12.0-volts DC
(LPH=Liters Per Hour)
---|---|---
Model| Fuse
Required
(amps)| NRV
Fitted| 0 ft. Head
GPH/amps| 3.3 ft. Head
GPH/amps| 6.7 ft. Head
GPH/amps| Om Head lm Head
LPH/amps LPH/amps
.| 2m Head
LPH/amps| Max Head
(ft4D13.6v/
m©12v)
T500| 3| N| 536/1.7| 334/2.2| 200/2.1| 1818/1.5| 1156/1.5| 0| 7.6/1.8
3| Y| 510/1.8| 311/2.2| 186/2.1| 1692/1.5| 1116/1.5| 0| 7.6/1.8
Flow rates stated are for comparison purposes. Meets ABYC, US Coast Guard and ISO standards. NMMA Listed.
WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov.
reliable performance
- Patented X-Air™ anti airlock impeller ejects trapped air in the pump and pipework – preventing pump burnout
- 40% better protection against water ingress & electrolysis
easy installation and service
-
Compatible mounting patterns with leading pumps – no new drill holes required
-
Installation Kit Includes: Attwood Tsunami Mk2 500 GPH Pump, Washer / Non Return Valve, 90° Outlet, Straight Outlet, 3/4″ x 5′ Pump Hose, 3/4″ Thru-hull fitting, 2-way on/off switch with bezel plate, Snap-It hose clamps, Wire Kit, Installation Kit
Model 5614-7
Made in China
©2021 Attwood Corporation
Lowell, MI, 49331
www.attwoodmarine.com
21401 Rev A 1021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>