Attwood Marine MK2 T500 Manual Bilge Pump w/Installation Kit User Guide
- June 9, 2024
- Attwood Marine
Table of Contents
Marine MK2 T500 Manual Bilge Pump w/Installation Kit
WATER SYSTEMS & VENTILATION
**Pump Kits & Accessories
**
Tsunami Mk2 Recirq Aerator Kit
The Tsunami Recirq Kit recirculates livewell water to keep it cooler and rich
in oxygen. This self-contained system feeds a separate aerator spray head and
works even while you are underway and cannot use a thru-hull connection. Add
this kit to any tank that already has a freshwater fill system. Or use as a
backup pump for a fail-safe system.
Recirq Kit includes:
- (1) 500 GPH Tsunami aerator pump with short inlet, threaded outlet
- (1) 4125-1 aerator spray head
- (1) 4232-1 Stainless Steel strainer
- (2) Plastic hose clamps
- (1) 3/4″ diameter x 23″ long poly hose
- (1) Straight thread-to-barb connector
OEM Part # | Part # |
---|---|
— | 5253-7 |
Tsunami Mk2 Bilge Pump Installation Kits
Complete kit to install manual bilge pump with 3/4″ I.D. hose outlet.
- (1) 2-way on/off switch with bezel plate
- (1) 3/4″ I.D. x 5′ corrugated hose
- (1) Thru-hull fitting for 3/4″ I.D. hose
- (2) Snap-It hose clamps
- (1) 2-conductor 16-gauge wire, 20′ long
- (1) In-line fuse holder with 2A fuse
Caution: Bilge pump switches are not external ignition protected.
Description | Hose Size | OEM Part # | Part # |
---|---|---|---|
Complete kit (without pump) | 3/4″ I.D. | — | 4116-5 |
Complete kit with Tsunami Mk2 T-500 bilge pump | 3/4″ I.D. | — | 5614-7 |
6′ hose with (2) clamps | 3/4″ I.D. | — | 4199-7 |
6′ hose only | 1-1/8″ I.D. | — | 11551-5 |
|
---|---
Documents / Resources
|
Attwood Marine MK2 T500 Manual Bilge Pump w/Installation
Kit
[pdf] User Guide
MK2 T500 Manual Bilge Pump w Installation Kit, MK2 T500, Manual Bilge Pump w
Installation Kit, Pump w Installation Kit
---|---