FlexSolar E10 Lightweight Backpack Solar Charger User Manual
- June 15, 2024
- FLEXSOLAR
Table of Contents
FlexSolar E10 Lightweight Backpack Solar Charger
GENERAL
Thanks for purchasing this FLEXSOLAR® product. Before operating, please read these instructions carefully. This instruction manual contains information for the safe use and maintenance of the product. Before using a solar photovoltaic system (including cable, power station or other electric equipment), the user should be familiar with the mechanical and electrical requirements for photovoltaic systems.
Please keep this instruction manual in a safe place for future reference. The manufacturer does not accept responsibility for any damages due to not following these instructions.
PRODUCT OVERVIEW
10W FLEXIBLE SOLAR CHARGER (E10, FLC-E2-060100-1)
- FLEXSOLAR solar panels are made of monocrystalline solar cells in series with high efficiency, high transmission rate, and anti-aging EVA. They are designed for easy use, extended longevity, and portable operation.
Unfolded View of the 10W Flexible Solar Charger
Suitable for all electronic products:
- Tablets, iPad, iPhone, iPad, etc.
- All Phones(Samsung, Huawei, MIUI, etc)
- MP3 MP4 electronic devices
- Digital photo frames, mini speakers
- PSP, Switch, GBA game machines
- Handheld GPS navigation systems
SPECIFICATIONS
Parameter of E10
- Rated Peak Power (Pmax | W) 10 W
- Open Circuit Voltage (Voc | V) 6.6 V
- Short Circuit Current (Isc | A) 1.9 A
- Maximum Power Voltage (Vmp | V) 5.5 V
- Maximum Power Current (Imp | A) 1.8 A
- Module Efficiency (%) 24%
- Solar-type monocrystalline
- Power tolerance ± 10%
- Temperature Co-efficient (Pmax) -0.45%/K
- Temperature Co-efficient (Voc) -0.32%/K
- Temperature Co-efficient (Isc) +0.02%/K
- NOCT (Air 20°C, Sun 0.8kW/m², wind 1m/s) 45±2°C
- Weight 10.6 ounces (300 g)
- Operation Temperature -4°F to 149°F (-20°C to 65°C )
- IP Rating IP67
Output and Accessories of E10
| Category | Location | Description | Cable Length | Wire Sepc- ification | Remark |
|---|---|---|---|---|---|
| Output Ports | From controller |
box
|
USB A
|
/
|
/
|
Built In
Access- ories
|
/
|
Carabiner
|
/
|
/
|
2
WHAT IS IN BOX
Make sure you have all the following items included in the package. If any item is damaged or missing, contract us.
OPERATION
Charging Electronic Devices
Unfold the solar panel under direct sunlight, connect flexible solar charger with the electronic device through power output cable (see picture 1), the charging signal will be shown on your electronic device; or if the sunlight is not sufficient, the solar charger can be connected with power bank for energy storage.
Junction box of back view
LED indicate:
-
Left LED
Red light once get light -
Right LED
- 370mA Blue light
- 880mA Green light
MAINTENANCE
- Clean the surface of the solar panel when needed. Always use a soft sponge or cloth for cleaning. A mild, non-abrasive cleaning detergent may be used to remove stubborn dirt. Don’t clean when the panel surface is hot.
- Clean solar panels more frequently during drier months, as they may become covered in dust more quickly. A pressure washer is not recommended.
- Caution: Observe the maintenance instructions for all components used in the system, such as support frames, charge controller, batteries, etc.
WARRANTY STATEMENT
FLEXSOLAR® warrants to the original consumer purchaser that the FLEXSOLAR® product will be free from defects in workmanship and material under normal consumer use during the applicable warranty period identified in the ‘Warranty Period’ section below, subject to the exclusions set forth below. This warranty statement sets forth FLEXSOLAR® total and exclusive warranty obligation. We will not assume, nor authorize any person to assume for us, any other liability in connection with the sale of our products.
-
Warranty Period:
The warranty period is 24 months. In each case, the warranty period is measured starting on the date of purchase by the original consumer purchaser. The sales required in order to establish the start date of the warranty period. -
Remedy:
FLEXSOLAR® will repair or replace (at FLEXSOLAR® option) any FLEXSOLAR® product that fails to operate during the applicable warranty period due to defect in workmanship or material. If a valid claim is made during the applicable period, FLEXSOLAR®, at its option, will either (1) replace the product, or (2) exchange the product with a product that is of equal value. A replacement product assumes the remaining warranty of the original product or 60 days from the date of replacement, whichever is greater. Customer is responsible for the return shipping costs. -
Limited to Original Consumer Buyer:
The warranty on FLEXSOLAR® products is limited to the original consumer purchaser. -
Exclusions:
FLEXSOLAR® warranty does not apply to (I) any product that is misused, abused, modified, damaged by accident, or used for anything other than normal consumer use as authorized in FLEXSOLAR® current product literature, or (II) any product purchased through an online auction house. -
How to Receive Service:
To obtain warranty service, you must contact our customer service team. If our customer service team determines that further assistance is required, they will give you a Return Material Authorization (“RMA”) number and will provide you with return instructions. You must properly package the product, clearly marking the RMA number on the package and including proof of your purchase date with the product. We will process your return and send your repaired or replacement product to you in continental North America. -
Exclusive Remedy; Limitation of Liability:
The foregoing provisions state FLEXSOLAR® entire liability, and your exclusive remedy, for any breach of warranty, express or implied. IN NO EVENT WILL FLEXSOLAR® BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM ANY USE OR MALFUNCTION OF ANY FLEXSOLAR PRODUCT, OR FROM ANY BREACH OF WARRANTY, INCLUDING DAMAGE TO OTHER DEVICES. IN NO EVENT WILL FLEXSOLAR’S LIABILITY FOR ANY CLAIM, WHETHER IN CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR UNDER ANY OTHER THEORY OF LIABILITY, EXCEED THE AMOUNT PAID BY YOU FOR THE FLEXSOLAR® PRODUCT. Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
PRODUCT MARK
Product Label:
- Model Type FLC-E2-060100-1
- Max Peak Power (Pmax |W) 10W
- Maximum Power Point Voltage (Vmp |V) 6.6V
- Maximum Power Point Current (Imp |A) 1.9A
- Open Circuit Voltage (Voc |V) 5.5V
- Short Circuit Current (Isc |A) 1.8A
- Normal Operating Cell Temperature (NOCT) 45℃
- Temperature Range (℃) -20℃~65℃
- Power Tolerance ±10%
- Application Class Class A
- Net Weight Ounce/(g) 10.6 ounces/(300 g)
- Dimensions (unfolded) mm/in 393x224x3 mm/15.5×8.8×0.1 in
- Dimensions (folded) mm/in 224x193x17 mm/8.8×7.6×0.7 in
All technical data at Standard Test Condition (STC)
Standard Test Condition (E=1000W/m2, Tc=25℃, AM 1.5)
WARNING ELECTRICAL HAZARD
- Only qualified personnel should install or perform maintenace work on these modules.
- This unit produces electricity if exposed to light.
- Follow all applicable electrical safety precautions.
- Don’t disconnect when loading.
- Don’t damage or scratch the suface of the modules.
UPC code:
INNOTECH ENTERPRISE LLC
Customer Support:
Innotech Enterprise LLC is a wholly subsidiary of Flextech Company.
FLEXSOLAR® is a registered trademark of Flextech Company. ®All rights reserved. ©2013-2024 FLEXSOLAR® is a trademark licensed for use by Flextech Company and registered in the U.S.
FREQUENTLY ASKED QUESTIONS
What is the brand and model of the lightweight backpack solar charger mentioned in the provided information?
The brand is FlexSolar, and the model is E10.
What is the material used in the FlexSolar E10 Lightweight Backpack Solar Charger?
The material used is Monocrystalline Silicon.
What are the product dimensions of the FlexSolar E10 Lightweight Backpack Solar Charger?
The product dimensions are 10.7 L x 6.9 W x 0.1 H inches.
What is the weight of the FlexSolar E10 Lightweight Backpack Solar Charger?
The item weight is 8.1 ounces.
What efficiency does the FlexSolar E10 solar panel offer?
The solar panel offers high efficiency, up to 23%.
What type of connectors does the FlexSolar E10 Lightweight Backpack Solar Charger have?
The connectors include USB and USB 2.
What are the included components with the FlexSolar E10 Lightweight Backpack Solar Charger?
The included components are 1 User manual, 2 6W Solar Charger, 1 2-1 USB-A cable, and 4 Carabiners.
What is the AC adapter current for the FlexSolar E10 solar panel?
The AC adapter current is 0.93 Amps.
What is the maximum voltage and power output of the FlexSolar E10 solar panel?
The maximum voltage is 5 Volts, and the maximum power is 12 Watts.
How can you achieve a power output of 12 Watts with the FlexSolar E10 solar panel?
By connecting 2 solar panels in parallel with a USB-USB cable, the power output can be 12 Watts.
What devices can be charged using the FlexSolar E10 solar panel?
The solar panel can charge mini fans, Android cellphones, bicycles, security cameras, and other outdoor devices.
Does the FlexSolar E10 solar panel have an internal battery for energy storage?
No, the panel does not have an internal battery, so it cannot store electricity.
What is the efficiency of the monocrystalline solar cells used in the FlexSolar E10 solar panel?
The monocrystalline solar cells offer up to 23% efficiency.
Is the FlexSolar E10 solar panel waterproof?
Yes, the panel comes with IP67 waterproofing, designed to prevent water entry. However, it cannot be directly immersed in water.
What accessories are included for carrying and hanging the FlexSolar E10 solar panel?
The solar panel comes with 4 carabiners, allowing it to be hung on backpacks and tents.
DOWNLOAD THE PDF LINK:FlexSolar E10 Lightweight Backpack Solar Charger User Manual
REFERENCE:FlexSolar E10 Lightweight Backpack Solar Charger User Manual- Device.Report