FLEXSOLAR 40W Flexible Solar Charger User Manual
- June 15, 2024
- FLEXSOLAR
Table of Contents
40W FLEXIBLE SOLAR CHARGER
User Manual
Please read carefully before using
40W Flexible Solar Charger
Suitable for all electronic porducts:
- Tablets, iPad, iPhone, iPad, etc.
- All Phones(Samsung, Huawei, MIUI, etc)
- MP3 MP4 electronic devices
- Digital photo frames, mini speakers
- PSP, Switch, GBA game machines
- Handheld GPS navigation systems
GENERAL
Thanks for purchasing this FLEXSOLAR® product. Before operating, please read
these instructions carefully. This intruction manual contains information for
safe use and maintenance of the product. Before using a solar photovoltaic
system (including cable, power station or other electric equipment), the user
should be familiar with the mechanical and electrical requirements for
photovoltaics systems.
Please keep this instruction manual in a safe place of future reference.
The manufactuer does not accept responsibility for any damages due to not
following these instructions.
PRODUCT OVERVIEW
40W FLEXIBLE SOLAR CHARGER (E40, FLC-E6-200400-3)
FLEXSOLAR solar panel are made of monocrystalline solar cells in series with
high efficicency, high transmission rate, and antiaging EVA. They are designed
for easy use, extended longevity and portable operation.
Unfolded View of the 40W Flexible Solar Charger
SPECIFICATIONS
Parameter of E40
Open Circuit Voltage (Voc | V)| 40 W
---|---
Rated Peak Power (Pmax | W)| 19.8 V
Short Circuit Current (Isc | A)| 2.0 A
Maximum Power Voltage (Vmp | V)| 23.7 V
Maximum Power Current (Imp | A)| 2.1 A
Module Efficiency (%)| 24%
Solar Cell Type| Monocrystalline
Power tolerance| ± 10%
Temperature Co-efficient (Pmax)| -0.45%/K
Temperature Co-efficient (Voc)| -0.32%/K
Temperature Co-efficient (Isc)| +0.02%/K
NOCT (Air 68°F/20°C, Sun 0.8kW/m², wind 1m/s)| 113±35.6°F (45±2°C)
Weight| 45.9 ounces (1300 g)
Operation Temperature| -4°F to 149°F (-20°C to 65°C )
IP Rating| IP67
Output and Accessories of E40
Category| Location| Description| Cable
Length| Wire Sep-
cification| Remark
---|---|---|---|---|---
Output
Ports| From
controller
box| USB QC3.0| I| I| Built In
USB C PD2.0
DC 5521
Accessories| /| Carabiner| /| /| 2
WHAT IS IN BOX
Make sure you have all the following items included in the package. If any item is damaged or missing, contract us.
OPERATION
Charging Electronic Devices
Unfold the solar panel under direct sunlight, connect flexible solar charger
with the electronic device through power output cable (see picture 1), the
charging signal will be shown on your electronic device; or if the sunlight is
not sufficient, the solar charger can be connected with power bank for energy
storage.
-
When the charger is connected as instructed above, the electronic device shows: “Charging is temporary unavailable” or no sign for charging.
Please pull out the output cable and reconnect, or adjust the angle of the charger to expose more sunlight. -
The mobile USB device will indicate it is charging as well as the LED lights on the solar panel.
MAINTENANCE
Clean the surface of the solar panel when needed. Always use a soft sponge or
cloth for cleaning. A mild, non-abrasive cleaning detergent may be used to
remove stubborn dirt. Don’t clean when the panel surface is hot.
Clean solar panels more frequently during drier months, as they may become
covered in dust more quickly. A pressure washer is not recommended.
Caution: Observe the maintenance instructions for all components used in the
system, such as support frames, charge controller, batteries, etc.
WARRANTY STATEMENT
FLEXSOLAR® warrants to the original consumer purchaser that the FLEXSOLAR® product will be free from defects in workmanship and material under normal consumer use during the applicable warranty period identified in the ‘Warranty Period’ section below, subject to the exclusions set forth below. This warranty statement sets forth FLEXSOLAR® total and exclusive warranty obligation. We will not assume, nor authorize any person to assume for us, any other liability in connection with the sale of our products.
Warranty Period:
The warranty period is 24 months. In each case, the warranty period is
measured starting on the date of purchase by the original consumer purchaser.
The sales required in order to establish the start date of the warranty
period.
Remedy:
FLEXSOLAR® will repair or replace (at FLEXSOLAR® option) any FLEXSOLAR®
product that fails to operate during the applicable warranty period due to
defect in workmanship or material. If a valid claim is made during the
applicable period, FLEXSOLAR®, at its option, will either (1) replace the
product, or (2) exchange the product with a product that is of equal value.
A replacement product assumes the remaining warranty of the original product
or 60 days from the date of replacement, whichever is greater.
Customer is responsible for the return shipping costs.
Limited to Original Consumer Buyer:
The warranty on FLEXSOLAR® products is limited to the original consumer
purchaser.
Exclusions:
FLEXSOLAR® warranty does not apply to (I) any product that is misused, abused,
modified, damaged by accident, or used for anything other than normal consumer
use as authorized in FLEXSOLAR® current product literature, or (II) any
product purchased through an online auction house.
How to Receive Service:
To obtain warranty service, you must contact our customer service team.
If our customer service team determines that further assistance is required,
they will give you a Return Material Authorization (“RMA”) number and will
provide you with return instructions. You must properly package the product,
clearly marking the RMA number on the package and including proof of your
purchase date with the product. We will process your return and send your
repaired or replacement product to you in continental North America.
Exclusive Remedy; Limitation of Liability:
The foregoing provisions state FLEXSOLAR® entire liability, and your exclusive
remedy, for any breach of warranty, express or implied.
IN NO EVENT WILL FLEXSOLAR® BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES ARISING FROM ANY USE OR MALFUNCTION OF ANY FLEXSOLAR PRODUCT, OR FROM
ANY BREACH OF WARRANTY, INCLUDING
DAMAGE TO OTHER DEVICES. IN NO EVENT WILL FLEXSOLAR’S LIABILITY FOR ANY CLAIM,
WHETHER IN CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT
LIABILITY) OR UNDER ANY OTHER THEORY OF LIABILITY, EXCEED THE AMOUNT PAID BY
YOU FOR THE FLEXSOLAR® PRODUCT.
Some states or provinces do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may
not apply to you.
PRODUCT MARK
Product Label:
| Model Type | FLC-E6-200400-3 |
|---|---|
| Max Peak Power (Pmax | W) |
| Maximum Power Point Voltage (Vmp | V) |
| Maximum Power Point Current (lmp | A) |
| Open Circuit Voltage (Voc | V) |
| Short Circuit Current (Isc | A) |
| Normal Operating Cell Temperature (NOCT) | 113°F/45 ℃ |
| Temperature Range( | -68°F~149°F (-20 ℃~65 ℃) |
| Power Tolerance | ±10% |
| Application Class | Class A |
| Net Weight Ounce / (g) | 45.9 ounces / (1300 g) |
| Dimensions (unfolded) mm / in | 1240 x 282 x 3 mm / 48.8 x 11.1 x 0.1 in |
| Dimensions (folded) mm / in | 282 x 203 x 45 mm / 111.1 x 8.0 x 1.8 in |
All technical data at Standard Test Condition (STC)
Standard Test Condition (E = 1000W/m 2 , Tc = 77°F/25 ℃ , AM 1.5)
WARNING
ELECTRICAL HAZARD
Only qualified personnel should install or perform maintenace work on these
modules.
This unit produces electricity if exposed to light.
Follow all applicable electrical safety precautions.
Don’t disconnect when loading.
Don’t damage or scratch the suface of the modules.
UPC code:
Serial Number:
INNOTECH ENTERPRISE LLC
Customer Support: 800-620-1249
support@flexsolarenergy.com
flexsolarenergy.com
Innotech Enterprise LLC is a wholly subsidiary of Flextech Company.
FLEXSOLAR® is a registered trademark of Flextech Company.
®All rights reserved.
©2013-2024 FLEXSOLAR® is a trademark licensed for use by Flextech Company and
registered in the U.S.
M-FLC-E6-200400-3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>