FLEXSOLAR C120 120 Watt Foldable Solar Panel Instruction Manual

June 9, 2024
FLEXSOLAR

FLEXSOLAR C120 120 Watt Foldable Solar Panel Instruction Manual
FLEXSOLAR C120 120 Watt Foldable Solar Panel

ACCESSORIES INCLUDED

  • 1 (0.3m) cable with Anderson to DC5521 male connector

  • V (0.3m) cable with Anderson to alligator clip cable

  • 6.6′ (2m)  Anderson to  SAE cable

  • SAE Polarity Reverse Adapter Connector

  • 10 in  interchangeable connectors

  • 20A (12v/24V) PWM controller cables with Anderson cable

  • Carry bag

Thank you for purchasing this FLEXSOLAR® product. Before operating, please read
these instructions carefully. This instruction manual contains information for safe use and maintenance of the product.

Please keep this instruction manual in a safe place for future reference.

The manufacturer does not accept responsibility for any damages due to not following these instructions.

GENERAL

Please carefully read the following operation and safety instructions. Non- compliance with these instructions may void the product warranty.

This guide contains information regarding the operation and safe handling FLEXSOLAR® solar panels and components. All operations must be read and understood before attempting operation. If there are any questions, please contact your dealer or FLEXSOLAR® customer support for further information.

The user should conform to all safety precautions in the guide when using solar panels. Before using a solar photovoltaic system (including cable, power station or other electric equipment), the user should be familiar with the mechanical and electrical requirements for photovoltaic systems. Keep this guide in a safe place for future reference.

  • All solar panels come with permanently attached output ports. Your dealer can provide additional extension cables to simplify module wiring.
  • Exercise caution when wiring or handling solar panels exposed to sunlight.
  • Photovoltaic solar panels convert light energy to direct-current electrical energy and are designed for outdoor use.
  • Solar panels may be hung, placed flat, or use provided kickstand to face towards the sun.
  • Do not frequently connect or disconnect wires attached to solar panels when they are exposed to sunlight in order to extend panel service life.
  • Do not attempt to disassemble the solar panel, and do not remove any attached nameplates or components. Doing so will void the warranty.
  • Do not apply paint or adhesive to the solar panel.
  • Do not use mirrors or other hardware to artificially concentrate sunlight on the solar panel.

Safety Precautions for Using a Foldable Solar Panel

  • solar panels produce electrical energy when exposed to sunlight.
  • FLEXSOLAR® solar panels can be connected in series. When connected together (either in series or parallel), make sure that each solar panel has the same. rated voltage. Your dealer can provide additional cables to simplify panel connections.
  • Observe the instructions and safety precautions for all other components used in the system, including wiring, cables, connectors, and etc.
  • Use only equipment, connectors, wiring, and mounting hardware suitable for use in a photovoltaic system.
  • Always use the same type of solar panel in a particular photovoltaic system.
  • Under normal operating conditions, solar panels will produce currents and voltages that may vary from those listed in the data sheet. Data sheet values are applicable at standard test conditions only.

General Operation Notes

  • Do not stand or step on the solar panel.
  • Do not drop the solar panel or allow objects to fall on the solar panel.
  • Do not place any heavy objects on the solar panel.

PRODUCT OVERVIEW

120W Foldable Solar Panel (FLC-C4-201200-4)

FLEXSOLAR® solar panels are made of monocrystalline solar cells in series with high efficiency, high transmission rate, and anti-aging EVA. They are designed for easy use, extended longevity, and portable operation.

Unfolded View of the 120W Foldable Solar Panel:

PRODUCT OVERVIEW

Folded View of the 120W Foldable Solar Panel:

PRODUCT OVERVIEW

SPECIFICATIONS

Specifications

  • Maximum Power (Pmax): 120w
  • Max Power Voltage (Vmp): 19.8v
  • Max Power Current (Imp): 6.06A
  • Open Circuit Voltage (Voc): 23.7V
  • Short Circuit Current (Isc): 636A
  • Cell Efficiency: 22%
  • Cell Type: Monocrystalline
  • Power tolerance: +10%
  • Temperature Co-efficient (Power): -0.45%/K
  • Temperature Co-efficient (Voltage): -0.32%/K
  • Temperature Co-efficient (Current): +0.02%/K
  • NOCT (Air 20°C, Sun 0.8kW/m?, Wind Im/s): 4542°C
  • Weight (Includes Accessory Items): 10.8 Ibs/(4.9kg)
  • Operation Temperature: -4F to 149 (-20°C to 65°C)
  • IP Rating: IP65

Cables

  • Passed conduction test, there was no short circuit, open circuit, dislocation, etc.
  • Cables are free of dirt, scratches, damage, color difference or other defects.
  • All materials meet RoHS environmental standards.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals