denver SWC-156 Smartwatch User Manual
- June 15, 2024
- Denver
Table of Contents
**denver SWC-156 Smartwatch User Manual
**
Safety information
Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.
- This product is not a toy. Keep it out of reach of children.
- Warning: This product includes lithium polymer battery.
- Keep product out of the reach of children and pets to avoid chewing and swallowing.
- Product operating and storage temperature is from 0 degree Celsius to 40 degree Celsius. Under and over this temperature might affect the function.
- Never open the product. Repairs or service should only be performed by qualified personnel.
- Please remove the Smart watch in case of any leakage or excessive heat from the product to avoid burns or rash.
- Only charge with the supplied USB cable.
- Using other accessories than the ones delivered with the product can cause abnormal functionality.
- Bluetooth wireless technology operates within a range of about 10 m (30 feet).
IMPORTANT! BPM-Heart Rate-Blood Oxygen app measurements
are not intended for medical use, including self diagnosis or consultation
with a doctor, and are only designed for general fitness and wellness
purposes.
This is not a medical diagnostic device.
Heart rate, blood pressure, blood oxygen monitoring
Only a medical practitioner is qualified to interpret your blood oxygen
measurements. The use of this Smartwatch should not replace regular medical
examinations.
Blood Oxygen can be subjected to wide fluctuations in a short period of time.
Its level depends on many factors.
Different medicines, alcohol and smoking can exert a large influence on the
level of Blood Oxygen. Do not smoke, drink caffeinated beverages or exercise
within the 30 minutes before measuring your blood oxygen.
Intended Use
This smartwatch is intended for monitoring fitness related metrics such as heart rate, blood pressure, distance walked or run, calorie consumption and quality of sleep. Data measured should not be used for any medical, ambulatory or dietary reference.
Product overview
Charge & Power
Please make sure the device is fully charged before first use.
Only use the original charger that comes with the watch. To charge the smartwatch, place the watch in the charging dock. If successfully connected, the charging icon appears on the screen.
Remarks: After plugging in the charger, it will immediately enter the
charging state. If there is no display, it will take 3-5 minutes to enter the
charging state.
Press and hold for 3 seconds to turn the watch on or off.
How to Wear
Wear the watch on your wrist at comfortable tightness.
App installation & connecting with the watch
Download the “FitPro” APP from App Store or Google Play Store.
Scan the QR code to start the download.
Open FitPro App and connect watch with phone by Bluetooth.
Click on “Setting” then “Bind device” to find your watch. When found, allow
pairing.
Make sure your phone’s Bluetooth is turned on.
Note : to be able to use music playback and Bluetooth call function from
the watch, go to Bluetooth settings on your phone/tablet and connect with
“SWC-156”.
Device System support: Android 5.0 and above; iOS 9.0 and above.
Smartwatch function description
Press side button to turn on the watch.
- Tap the screen to enter the main menu.
- Swipe down on the screen to enter the notifications, and swipe up to enter the control center.
- From the standby interface, swipe left or right to switch the dial.
Heart rate, blood pressure, blood oxygen three-in-one
After entering the heart rate three-in-one test interface for a few seconds, the current heart rate, blood pressure, and blood oxygen test results are displayed.
Telephone book
Add up to 10 frequent contacts through the app. After the successful
connection between the Smartwatch and app Bluetooth, the contacts can be
synchronized to the Smartwatch phone book and displayed. Click the contacts to
make a call.
(Note: the phone also needs to be connected to the smartwatch.)
Sleep mode
When you fall asleep, the Smartwatch will automatically enter the sleep
monitoring mode; automatically monitor your deep sleep / light sleep / awake
status all night, calculate your sleep quality; the wristband only shows the
total length of deep sleep / light sleep / sleep, enter the APP and view sleep
data details.
Note: Sleep data will be available when you wear your wristband and sleep
will be monitored from 10:00 pm.
Application push
If this function is enabled, when there are messages such as SMS, WeChat, QQ, Facebook, etc., the Smartwatch will vibrate to remind and display the content received by the app.
APP function and settings
Personal information
Please set your personal information after entering the app.
Go to Settings Personal Information, you can set gender, age, height, weight
and etc.
You can also set your daily goal of walking steps.
Please notice – All products are subject to change without any notice. We
take reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
Electric and electronic equipment and included batteries contains materials,
components and
substances that can be hazardous to your health and the environment, if the
waste material
(discarded electric and electronic equipment and batteries) is not handled
correctly.
Electric and electronic equipment and batteries is marked with the crossed out
trash can symbol,
seen above. This symbol signifies that electric and electronic equipment and
batteries should not
be disposed of with other household waste, but should be disposed of
separately.
As the end user it is important that you submit your used batteries to the
appropriate and designated facility. In this manner you make sure that the
batteries are recycled in accordance with
legislature and will not harm the environment.
All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.
Hereby, Denver A/S declares that the radio equipment type SWC-156 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following.
internet address: denver.eu and then click the search ICON on topline of
website.
Write model number: SWC-156. Now enter product page, and RED directive is
found under downloads/other downloads.
Operating Frequency Range: 2402-2480MHz
Max Output Power: 0.28W
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu
Contact
Nordics
Headquarter
Denver A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
Phone: +45 86 22 61 00
(Push “1” for support)
E-Mail
For technical questions, please write
to:support.hq@denver.eu
For all other questions please write
to:contact.hq@denver.eu
Germany
Denver Germany GmbH Service
Max-Emanuel-Str. 4
94036 Passau
Phone: +49 851 379 369 40
E-Mail
support.de@denver.eu
Fairfixx GmbH
Repair and service
Rudolf-Diesel-Str. 3 TOR 2
53859 Niederkassel
(for TV, E-Mobility/Hoverboards/Balanceboards, Smartphones & Tablets)
Tel.: +49 851 379 369 69
E-Mail: denver@fairfixx.de
Benelux
DENVER BENELUX B.V.
Barwoutswaarder 13C+D
3449 HE Woerden
The Netherlands
Phone: 0900-3437623
E-Mail: support.nl@denver.eu
Austria
Lurf Premium Service GmbH
Deutschstrasse 1
1230 Wien
Phone: +43 1 904 3085
E-Mail: denver@lurfservice.at
Spain/Portugal
DENVER SPAIN S.A
Ronda Augustes y Louis Lumiere, nº 23 – nave 16
Parque Tecnológico
46980 PATERNA
Valencia (Spain)
Spain
Phone: +34 960 046 883
Mail: support.es@denver.eu
Portugal:
Phone: +35 1255 240 294
E-Mail: denver.service@satfiel.com
If your country is not listed above, please write an email to
support@denver.eu
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
denver.eu
facebook.com/denver.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>