JBC PHSS Preheater Set 13x13cm 5×5 Inch Instruction Manual
- June 15, 2024
- JBC
Table of Contents
INSTRUCTION MANUAL
PHSS
Support for PCBs
up to 13x13cm/5×5”
This manual corresponds to the following reference:
PHS-SA
Packing List
The following items are included:
PHSS Support ………………………………………………………………………………………… 1 unit
Allen key …………………………………………….. 1 unit
Ref. 0013754
Manual ………………………………………………. 1 unit
Ref. 0026994
Features and Connections
Height Adjustment
PHSS Support allows changing the height between the PCB and the preheater heating area. It can be chosen between 3 positions for the working height adjustment.
Remove the 4 clamp knobs and the 4 black rubber caps.
Then remove the screws with an allen key (nº 3).
After removing both guides, rotate the guide brackets 180°. Place the guides,
secure them with the screws, place the rubber caps and fi x the clamp knobs.
Fast PCB Replacement
Moove the spring guide backward to change PCBs of the same batch fast and
easily.
Removing the PCB
Loosen the spring guide (1), push the PCB against the spring guide (2) and
lift it out (3).
Placing another PCB
Position the new PCB (4) and tighten the spring guide knobs (5).
Reworking large PCBs
PCBs larger than the support can be placed onto the 4 rubber caps
Maintenance
Before carrying out maintenance or storage, always allow the support to cool
down.
– Check periodically that the Support is clean, especially the sliding guide
axes.
– Use a damp cloth when cleaning. Alcohol can only be used to clean the metal
parts
– Replace any defective or damaged piece.
Use original JBC spare parts only.
– Repairs should only be performed by a JBC authorized technical service.
Safety
It is imperative to follow safety guidelines to prevent electric shock,
injury, fire or explosion.
– When using the support with a preheater unit, the temperature of accessible
surfaces may remain high after the unit is turned off. Handle with care.
– Be careful with the remains of liquid tin. In contact with the skin, it can
cause burns.
– Avoid flux coming into contact with skin or eyes to prevent irritation.
– Be careful with the smoke produced when soldering.
– Keep your workplace clean and tidy. Wear appropriate protection glasses and
gloves when working to avoid personal harm.
– This appliance can be used by children over the age of eight as well as
persons with reduced physical, sensory or mental capabilities or lacking
experience provided that they have been given adequate supervision or
instruction concerning the use of the appliance and understand the hazards
involved. Children must not play with the appliance.
– Maintenance must not be carried out by children unless supervised.
Specifications
PHSS
Support for PCBs up to 13x13cm / 5×5”
Ref. PHS-SA
| – Support Dimensions (Low Position): | 267 x 259 x 75 mm |
|---|---|
| (L x W x H) | 10.5 x 10.2 x 3 in |
| – Support Dimensions (High Position): | 267 x 259 x 96 mm |
| (L x W x H) | 10.5 x 10.2 x 3.8 in |
| – Max. PCB Dimensions (Between Clamps): | 13 x 13 cm / 5 x 5 in |
| – Total Net Weight: | Thickness 6 mm / 0.236 in |
| – Total Package Dimensions / Weight: | 2 kg / 4.4 lb |
| (L x W x H) | 368 x 368 x 125 mm / 2.7 kg 14.49 x 14.49 x 4.92 in / 5.95 lb |
Complies with CE standards.
ESD safe.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage
paid, to the dealer where it was purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at
the end of its life must be collected and returned to an authorized recycling
facility.
para manuales – color gris
Documents / Resources
| JBC
PHSS Preheater Set 13x13cm 5x5
Inch
[pdf] Instruction Manual
PHSS Preheater Set 13x13cm 5x5 Inch, PHSS, Preheater Set 13x13cm 5x5 Inch, Set
13x13cm 5x5 Inch
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>