DRACAST DRBR1200B Bicolor Adjustable CCT Point Source LED Light Instruction Manual
- June 5, 2024
- DRACAST
Table of Contents
DRACAST DRBR1200B Bicolor Adjustable CCT Point Source LED Light
Boltray Figure and Components
- LED display
- Adjustment knob
- Channel button
- Power switch
- Battery release button
- Battery slot
- Power socket
- Yoke
Product Information
Dracast Boltray Series is a high-output, compact light fixture that combines accurate color rendition with portable design. The result is a light fixture that is perfectly suited for photo and filmmaking applications. The 5000 model is equipped with a 120W LED COB array with adjutsable color temperature from 3000K – 6000K The Dracast Boltray Series is constructed with an aluminum alloy frame, making the fixture both durable and lightweight. The fixture is programmed with special effects that include Paparazzi, Fireworks, Bad Bulb, and Thunder Flash, TV, and SOS providing the user with multiple creative applications. The fixture can be powered via AC mains power, or via DC battery power through its on-board v-mount battery plates. The fixture is equipped with overheating protection via on-board fans for prolonged use. Boltray fixtures are equipped with a built-in 2.4G wireless receiver enabling it to be controlled via remote
Specifications
| Model | DRBRP12000B |
|---|---|
| Output Power | 120W |
| Luminous Flux | 9600LM |
| LED Quantity | 1PC |
| Color Temperature | 3000-6500K ± 200K |
| Illuminant | High-Power LED Module |
| Adjusting Range | 10%-100% |
Lithium Battery Type
| Sony V-lock battery Output Power > 120 W
Remote Control| 99channel 2.4G wireless remote control
Remote Control distance| ≥30M
Voltage| AC100-240V 50/60Hz
Warning and Notes
- Please do not expose the device to excess heat or moisture. Store in a cool, dry place.
- Please do not let the device be exposed to rain or other liquids to avoid permanent damage.
- Please do not connect the fixture to excess or incorrect voltage.
- The body will generate heat when operating. Use caution when handling.
- During transportation and installation, do not hit the fixture against other items or drop the fixture. This can cause damage to the light.
- Please do not directly look at the LED light when the fixture is powered on.
- Please do not place the fixture near any flammable materials or solvents.
- Please use a dry, soft cloth to clean fixture. The fixture may be cleaned with damp cloth only when the unit is powered off and unplugged. Dry the fixture with a soft cloth before plugging back in.
- Keep the fixture out of reach of children.
- Please do not operate the fixture over-current. Permanent damage can occur.
- Do not disassemble the fixture or touch the product’s internal parts. This could result in injury and permanent damage to the fixture. In the event of a malfunction, the fixture should be repaired by a qualified technician.
- Unplug the fixture when not in use.
- Failure to comply with these warning can result in injury and / or cause permanent damage to the fixture.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>