MAXIM LIGHTING 40312 Nassau 1-Light Small Wall Mount Instruction Manual
- June 8, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 40312 Nassau 1-Light Small Wall Mount
Please consult a qualified electrician for hanging fixtures and wiring.
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all the required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position theitem.
- Do not over-tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from the power source before assembling or cleaning.
- Switch off, unplug and allow the bulb to cool before replacing the bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause a fire.
- Do not plug the product in if the cord is torn or frayed.
- For outdoor use, caulk around the fixture with silicone sealant to prevent water intrusion.
Cleaning & Maintenance
- Apply high-quality car wax to the fixture regularly to protect it from environmental factors that can damage the metal.
- Clean with a soft cloth and mild detergent.
- Do not use abrasive cleaner.
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting, and scorching, or even cause the color to fade.
Contents
Before getting. started, ensure the package contains the following components:
INSTALLATION INSTRUCTIONS
- This step requires removing the mounting plate from the fixture body.
- Caulk around the backplate where the fixture meets the wall and leave a hole at the bottom to allow water to escape.
Light Source: 1 X E26 Medium Base 40W (Not Included)
Made in China.
Read User Manual Online (PDF format)
Loading......