SGILE SEJ2302 Remote Control Robot User Manual
- June 15, 2024
- SGILE
Table of Contents
SGILE SEJ2302 Remote Control Robot User Manual
WARNING:
CHOKING HAZARD-Small parts. Not for Children under 3 years.
Delivery Contents
- 1* The unicorn robot
- 1* Transmitter
- 6* Program keys
- 1* USB charger wire
- 1* Instruction manual
Safety Precautions
- Please ensure your child play under supervision.
- Please review the operating instructions with your children before playing.
- DO NOT pick up moving unicorn.
- Keep hands, hair and loose clothing away from the legs when power switch is turned ON.
- Remove battery from the toy when not in use.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The crossed-out dustbin symbol indicates that batteries, rechargeable batteries, button cells, battery packs, etc, can not be put in the household waste. Batteries are harmful to health and the environment. Please help to protect the environment from health risks. Tell your children to dispose of batteries properly by taking them to the local collecting points. This way batteries are recycled safely.
Waste Electrical and Electronic Equipment (WEEE)
When this appliance is out of use, please remove all batteries and dispose of
them separately. Bring electrical appliances to the local collecting points
for waste electrical and electronic equipment. Other components can be
disposed of in domestic refuse.
Cautions:
- Non-rechargeable batteries are not to be recharged.
- Rechargeable battery are only to be charged by an adult.
- Batteries are to be inserted with correct polarity.
- Exhausted batteries should be removed from the toy.
- The supply terminals are not to be short-circuited.
- Do not mix old and new batteries.
- Do not mix different types of batteries.
- Do not mix alkaline, standard(carbon-zinc)or rechargeable (nickel-cadmium) batteries.
Care and Maintenance
- Always remove batteries from the toy when it is not being used for a long period of time.
- Wipe the toy gently with a clean damp cloth.
- This toy is intended for indoor use only.
- Do not submerge the toy into water which can damage the electronic assemblies.
Body Instruction
POWER BUTTON
Swing downward longer than 3 seconds to turn on or turn off the unicorn. Quick
swing downward to choose play mode or to stop the action, or resume the
unicorn from hibernation.
CHOOSE THE PLAY MODE
Quick swing downward the horn and the eyes color change in tur
- The blue is gesture mode.
- The red is adventure mode.
- The purple is program mode.
Choose the color you want, wait a moment until the unicorn gives a yap, the
capabilities available. (Do not press any remote control buttons during this
process.)
TRANSMITTER
PROGRAM KEYS
Battery Installation and Charging
Battery installation for the transmitter
- Open the battery compartment by loosening the screw.
- Put 2 AAA battery (not included) in the battery compartment as per the polarity shown inside.
- Place back the battery compartment cover.
TIPS!
Best performance can be only obtained by using new alkaline batteries.
Charging the battery of unicorn robot
- Turn off the unicorn.
- Insert the charging cable into the socket in the back of the head.
- Insert the USB plug into the USB socket, the charging indicator turns on and the charging process begins.
- Unplug the charging cable after the charging indicator turns off.
Charging is completed.
TIPS!
- The unicorn can operate for about half hour per every one hour charging.
- Before recharging the battery, wait 10-15 minutes for it to cool down.
Remote control mode
Turn on the unicorn. Press any key on the transmitter to enter REMOTE CONTROL MODE in boot condition.
TIPS!
When the unicorn is standing on two feet only, press Turn left or turn right
button, and it will rotating with two feet only.
Gesture mode
Forward
Backward
Turn left
Turn right
- Press the horn when the eyes color turns blue.
- Wait 2-3 seconds until the unicorn barks, and the unicorn enter GESTURE MODE. (Do not press any trasmitter buttons in this mode.)
- Place your hand in front of the detection sensors, you can use gesture to control the unicorn to move forward, backward, turn left and right.
Adventure mode
- Press the horn until the eyes color turns red.
- Wait 2-3 seconds until the unicorn barks, and the unicorn enter ADVENTURE MODE. (Do not press any remote control buttons in this mode.)
- The unicorn can avoid the object ahead and look for a path without obstacles.
Program mode
Program steps
-
Insert the program key into the socket in mouth, until the unicorn barks and complete a command input.
-
Unplug the program key and repeat one step until you finish all the command you want.
-
Short press the nose and the unicorn will perform your programmed actions.
-
Press the horn until the eyes color turns purple.
-
Wait 2-3 seconds until the unicorn barks, and the unicorn enter PROGRAM MODE. (Do not press any remote control buttons in this mode.)
-
There are six program keys. Use the keys to program the unicorn actions with a maximum of 30 actions.
Six program keys
-
Sliding forward
-
Sliding backw
-
Turn left
-
Turn rig
-
Running forward
-
Stand up
EASTWEST ELECTRONIC COMMERCE CO., LIMITED | LEVEL 54 HOPEWELL CENTRE 183 QUEEN’S ROAD EAST HONG KONG
EASTWEST ELECTRONIC COMMERCE CO US LIMITED | 3500 SOUTH DUPONT HIGHWAY, SUITE G106 DOVER, DE 19901 UNITED STATES
LIFEWIT LIMITED | FLAT 237, 233 HIGH STREET CROYDON SURREY ENGLAND CR0 1FY UNITED KINGDOM
Lifewit GmbH | Frankenstein 5 97072 Wuerzburg Germany
MADE IN CHINA
Symbols
Documents / Resources
|
SGILE SEJ2302 Remote Control
Robot
[pdf] User Manual
SEJ2302 Remote Control Robot, SEJ2302, Remote Control Robot, Control Robot,
Robot
---|---