KEK Wallpaper Circle Instructions
- June 7, 2024
- KEK
Table of Contents
KEK Wallpaper Circle
WALLPAPER CIRCLE
Step 1
Before you start, make sure the wall is suitable for this type of wallpaper
(non-woven). The surface must be dry, clean, smooth, stable, evenly absorbent,
and of uniform colour with no old paint or rust showing through. Also make
sure to remove any old nails or screws
Step 2
The five sheets of your wallpaper circle are already cut in the shape of a
circle. Place them on the floor in the correct order to check out the full
image.
Step 3
We recommend ‘Ready & Roll for non-woven wallpaper’ by Perfax, or similar
wallpaper glue from other brands. Apply the glue on to the sheets (one by one)
with a glue roller. Use a spirit level to make sure the first sheet hangs
completely straight.
Start with sheet number 2 and place the sheet left from the spirit level.
Step 4
Then place sheet number 1, 3, 4 and 5 to complete the circle. After each
sheet, use a wallpaper spatula to make sure there are no air bubbles.
Step 5
Carefully pat away excess glue with a piece of kitchen paper. Be extra careful
with dark colours! Because the wallpaper is ‘uncoated’ (no protective layer)
the ink can come off slightly.
It is important to avoid excessive heat or draughts when hanging and drying
wallpaper, otherwise the wallpaper dries too quickly and this can lead to
gapping at seams.
© 2020 KEK Amsterdam | All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>