SGILE SEY-2102 Stunt Car User Manual

SGILE SEY-2102 Stunt Car User Manual

Illustrated Parts List

• 1 x Stunt Car (Built-in 3,7V 680mAh Li-polymer battery x 1)
  

• 1 x Remote Controller

• 1 x USB Cable

• 1 x Manual

Controller Battery Installation

1. Open the battery cover Using the screwdriver,
2. Load two. 1.5V AAA batteries following the polarity markings + and – inside the battery compartment,
3. Replace the battery cover and tighten the screws.

Stunt Car Charging

1. Connect the USB cable with the charging port in car, there connect the cable with computer.
2. LED indicator light flashes red and keeps on when charging.
3. LED indicator light turns green when it’s fully charged.

WARNING:

1. The car batteries need to be charged for 1-2 hours. And it can last for 25-30nIns after being fully charged
2. For the purposes of recharging the battery, only use the detachable supply unit provided with this toy. Unplug the USB cable after charging to avoid power loss.

BATTERY USE INSTRUCTION AND CAUTIONS

1. Non rechargeable batteries are not to be recharged.
2. Rechargeable batteries are owl/ to be charged under adult supervision (for toys supplied).
3. Rechargeable batteries are to be removed from the toy before being charged.
4. Different typos of batteries or new and used batteries are not to be mixed.
5. Batteries are to be inserted with the correct polarity.
6. Exhausted batter es are to be removed from the toy.
7. The supply terminals are not to be short-circuited.
8. Non-professionals shall not detach the batteries. When needed. it should be done by professionals; firstly, loose the screws and open the bonnet. Then weld the cable with soldering iron.
9. Do not squeeze, impale or throw the batteries into fire, it may have the Ask of explosion.
10. Avoid placing the car in an extremely cold or hot environment for a long time. Extreme environments can reduce the battery life inside the car.
11. Charge the car batteries at least once per half year to keep its battery functional.

CONTROLLING THE STUNT CAR

CARE & MAINTENANCE

1. Please use original USB charger. We suggest you charge it using a computer.
2. WARNING! Do not use the SGILE RC vehicle in road traffic.
3. Do not use the SGILE RC vehicle for transporting goods, persons or an macs.
4. Never use the SGILE RC vehicle outdoors during rain or snowfall. The car must not be run through water, puddles and snow, and must always be kept stored In a dry place.
5. Avoid running on courses which are laid exclusively with sand.
6. Do not expose the SGILE RC vehicle to direct sunlight.
7. Never subject the SGILE car to repeated changes of load – that means continuously reversing it.
8. Never throw the car on the floor from a standing position.
9. The SGILE RC vehicle must be Inspected before and after operation, each time it is used, to ensure that if has not become disassembled. Any screws or nuts that may have become loosened during operation must be lightened.

WEEE COMPLIANCE

Please help the environment by disposing of your product responsibly at the end of its life, The wheeled bin symbol indicates that this product should not be disposed of in your household waste containers. Instead, the product should be disposed of by tang a designated collection point for the recycling of waste electrical and electronic equipment, The Waste of Electrical and Electronic Equipment(WEEE) Directive (2012/19/EU) requires that the best available recycling techniques be employed to minimize the impact on the environment. Recycling electronics helps by keeping harmful chemicals out of the environment, and also saves money by reusing precious metals. Remove any batteries and dispose of them and the product at your local authority recycling For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the location where you purchased tilts product.

This symbol. showing refuse bins with a cross through them, denotes that empty batteries, rechargeable batteries, button cells, rechargeable battery packs, equipment batteries, disused electrical equipment, etc, should not be disposed of in domestic refuse, as they are harmful to the environment and health.

DECLARATION OF CONFORMITY

Hereby. Fujian EastWest Lifewit Technology Co.. LTD declares that this model including the controller confirm with the fundamental requirements of the following EC directives: EC Directives Toys f Safety) regulations 2011 and the other relevant regulations of Directive Radio equipment regulations 20141’53/EU. The original declaration of conformity can be requested from https://www.sgile.com/pages/compliance.

Maximum radio-frequency power transmitted: 4.20dBm
Frequency range: 2410MHz-2473MHz
The appliance is only to be used Kith the power supply unit provided with the appliance. The use of a different power supply unit may lead to the permanent damage of the battery and neighboring pads, as well as physical injury, Battery chargers used with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they must not be used until the damage has been repaired. This toy is only to be connected to equipment bearing either of the following symbols. or

FCC COMPLAINCE STATEMENT

FCC ID: 2AZNY-SEY-2101
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the use{ is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connector
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Warning! This toy contains small pans which can be swallowed and is therefore not suitable for children under 3 years of age. WARNING! danger of pinching during operation! Remove all packaging materials and wire fastenings before handing the toy over to the child, Please retain the packaging and address for information and in the event of any questions.

Customer Support

Website: www.sgile.com
Facebook: www.facebook.com/sgiletoy
Email: support@sgile.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>