GIMA Alternating Pressure Mattress User Manual
- June 6, 2024
- GIMA
Table of Contents
PROFESSIONAL MEDICAL PRODUCTS
MATERASSO A PRESSIONE ALTERNATA
ALTERNATING PRESSURE MATTRESS
Manuale d’uso – User manual
All serious accidents concerning the medical device supplied by us must be reported to the manufacturer and competent authority of the member state where your registered office is located.
INSTRUCTIONS
The Alternating Pressure Mattress consists of two parts: the mattress and the pump. The pump utilizes a small compressor to remain quiet and energy- efficient. The control panel is simple and very user-friendly. The mattress relieves pressure by sequentially deflating and inflating alternate air cells at approximately 12 minutes timed intervals. It is widely recognized that constant pressure to a bony prominence is the leading cause of skin breakdown. The continuous movement supplied by the unit lessens the areas of constant pressure and enhances circulation.
OPERATION
- Place the mattress on the bed frame with the hose end at the foot section of the bed frame.
- Using the integrated hooks, securely hang the pump on the bed end at the foot end or place it on a smooth flat surface.
- Connect the air hoses from the mattress to the pump.
- Plug the pump into a wall outlet. Be sure the power cord is safely away from possible hazards.
- Turn on the power switch on the control panel of the pump. The pump will begin to inflate the mattress.
- After inflation, adjust the mattress using the dial on the pump.
CAUTION
1. Do not smoke on or near the pump.
2. Keep the pump away from heated surfaces.
3. Explosion risk if used in the presence of flammable anesthetics.
4. Replace fuse as marked: T1A 250V. Power Input: ~ 220 V – 50 Hz – 0,1 A
PRODUCT SPECIFICATIONS
WEIGHT CAPACITY
|
ELECTRICAL
---|---
Maximum patient weight| 331Ibs (150kg)| Operating power:| — 220 V 50 Hz 0,1 A
max.
| | Fuses::| T1A250 V
ENVIRONMENTAL CONDITIONS
OPERATING CONDITIONS| STORAGE AND SHIPPING CONDITIONS
Ambient Temperature:| 10°C to 40°C (50°F to 104°F)| Ambient Temperature:|
-18°C to +43°C (0°F to 110°F)
Relative Humidity:| 10% to 75%| Relative Humidity:| 10% to 95%
Disposal: The product must not be disposed of along with other domestic waste. The users must dispose of this equipment by bringing it to a specific recycling point for electric and electronic equipment.
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
REF 28575
Gima S.p.A.
Via Marconi, 1 – 20060 Gessate (MI) Italy
[email protected] –
[email protected]
www.gimaitaly.com
Made in China
