SGILE SEJ2301 Remote Control Robot Instruction Manual
- June 13, 2024
- SGILE
Table of Contents
SEJ2301
Remote Control Robot Manual
Suitable for
age
Safety Precautions
- Please ensure your child play under supervision.
- Please review the operating instructions with your children before playing.
- Keep hands, hair and loose clothing away from the legs when power switch is turned ON.
- Remove battery from the toy when not in use.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARNING: CHOKING HAZARD-Small parts.
Not for Children under 3 years.
WEEE Compliance
The crossed-out dustbin symbol indicates that batteries, rechargeable
batteries, button cells, battery packs, etc, can not be put in the household
waste. Batteries are harmful to health and the environment. Please help to
protect the environment from health risks. Tell your children to dispose of
batteries properly by taking them to the local collecting points.
This way batteries are recycled safely.
Waste Electrical and Electronic Equipment(WEEE)
When this appliance is out of use, please remove all batteries and dispose of
them separately. Bring electrical appliances to the local collecting points
for waste electrical and electronic equipment. Other components can be
disposed of in domestic refuse.
Safety Instruction of Battery Use:
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable battery are only to be charged by an adult.
- Batteries are to be inserted with correct polarity.
- Exhausted batteries should be removed from the toy.
- The supply terminals are not to be short-circuited.
- Do not mix old and new batteries.
- Do not mix different types of batteries.
- Do not mix alkaline, standard(carbon-zinc)or rechargeable (nickel-cad- mium) batteries.
Care & Maintenance
- Use the original USB cable to charge the robot. Charging by computer is recommended.
- Do not expose the Robot to excessive physical shock.
- Do not expose the RC Robot and its battery to heat or dispose of in a fire.
- Do not put the RC Robot in a microwave oven or in a pressurized container.
- Do not attempt to dismantle, pierce, distort or cut the battery and do not attempt to repair the battery.
- Do not place any heavy objects on the RC Robot.
- Do not clean RC Robot with a solvent, denatured alcohol or other flammable solvents.When cleaning, be sure to unplug the power and charger.
- Do not subject the RC Robot and its battery to large temperature variations.
- Do not place your RC Robot near a source of heat.
- Disconnect the charger when you are not charging the robot.
Delivery Contents
Charging the battery of robot
Please switch off before charging. If the robot is on, the charging will be
cut off automatically.
The light on the robot will be light on when charging. The lights will be off
after charging finished.
Battery Installation and Charging
Battery installation for the transmitter
- Open the battery compartment by loosening the screw.
- Put 2 AA battery (not included) in the battery compartment as per the polarity shown inside.
- Place back the battery compartment cover.
TIPS!
Best performance can be only obtained by using new alkaline batteries.
Remote Controller Operation
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
EASTWEST ELECTRONIC COMMERCE CO., LIMITED | LEVEL 54 HOPEWELL CENTRE 183
QUEEN’S ROAD EAST HONG KONG
EASTWEST ELECTRONIC COMMERCE CO US LIMITED | 3500 SOUTH DUPONT HIGHWAY, SUITE
G106 DOVER, DE 19901 UNITED STATES
LIFEWIT LIMITED | FLAT 237, 233 HIGH STREET CROYDON SURREY ENGLAND CR0 1FY
UNITED KINGDOM
Pour en savoir plus :www.quefairedemesdechets.fr
Lifewit GmbH Friedenstraße 5 97072
Wuerzburg Germany
Batch No.: 20230725019
MFG: 20230725
Made in China
Documents / Resources
|
SGILE SEJ2301 Remote Control
Robot
[pdf] Instruction Manual
2AZNY-SEJ2301, 2AZNYSEJ2301, SEJ2301, SEJ2301 Remote Control Robot, Remote
Control Robot, Control Robot, Robot
---|---
|
SGILE SEJ2301 Remote Control
Robot
[pdf] User Manual
SEJ2301 Remote Control Robot, SEJ2301, Remote Control Robot, Control Robot,
Robot