Luxor 5348-FCG Modular Wall System User Manual

Luxor 5348-FCG Modular Wall System

Product Information

Specifications

• Model: Modular Wall System
• Assembly: Effortless Drop-In Assembly
• Inner Panels: Multifunctional
• Design: Expandable and Reconfigurable

Understanding the Modular Wall System
Congratulations on your purchase of a Modular Wall System! This system is designed to provide a quieter and less distracting environment. Here is a quick overview:

• The Modular Walls are easy to put together, with various frames and panel components that slide together for a simple assembly.
• Depending on the model wall you purchased, it will contain two or three types of Inner Panels that can be arranged in any configuration you choose.
• You can reconfigure or add to your Modular Wall system to adapt to your growing organization’s needs. The key is understanding the difference between a Starter Wall and an Add-On Wall.

Component Overview

• Feet: These pieces support the wall, allowing it to be freestanding.
• Foot Frame Inserts: These pieces connect the Feet to the Vertical Frame Columns.
• Vertical Frame Columns: These pieces hold the inner panels in place and connect walls to each other.
• Horizontal Frame Support/Cable Raceway: This piece connects the two Vertical Frame Columns and contains the Cable Raceway for organizing cords.
• Narrow and Medium Inner Panels: These pieces slide down the Frame Columns and can be arranged to suit the user’s needs.
• Wide Inner Panels: These pieces also slide down the Frame Columns and there will always be just one panel across.
• Horizontal Panel Separators: These pieces fit between rows of Inner Panels and are used for Narrow, Medium, and Wide Inner Panels.
• Horizontal Panel Separators: These pieces fit between inner panels placed side by side and are only used in walls containing Narrow and Medium inner panels.

Assembly Tips
Follow these tips for a smooth assembly process:

• Start by laying out all the components and identifying each piece.
• Follow the assembly instructions provided in the user manual step by step.
• Ensure that all connections are secure and panels are properly aligned.
• If you encounter any difficulties, refer to the troubleshooting section of the user manual or contact our customer support.

Cleaning and Care

• PET Panels

1. Using an upholstery attachment, vacuum to remove dust and loose dirt.
2. Lightly mist using an alcohol solution in a spray.
  * Do not saturate.
  * NOTE: Lysol aerosol spray has also been tested and found safe on SUDS fabrics.
3. Allow to air dry.

• Whiteboard Panels

1. Clean using a mild solution of water and dish soap.
  * Apply the solution using a spray bottle and wipe using a clean cotton towel or microfiber cloth.
  * Avoid paper towels, as they can cause scratches.
  * Follow up by wiping with a second cloth dampened with water.
2. Disinfect using an alcohol wipe or by using a clean cotton or microfiber cloth dampened with a 70% alcohol solution.
  * Avoid paper towels, as they can cause scratches.
3. Allow to air dry.

• Frosted Acrylic Panels
  Using a spray bottle, apply a solution of soapy water to dampen the entire surface you wish to clean.

FAQ

1. Can I add more panels to my Modular Wall system?
   Yes, the Modular Wall system is designed to be expandable. You can add more panels to adapt to your organization’s needs. Make sure to follow the instructions for adding panels provided in the user manual.

2. How do I reconfigure my Modular Wall system?
   To reconfigure your Modular Wall system, follow these steps:

3. Determine the new configuration you want for your panels.

4. Disassemble the existing configuration by carefully removing the panels and disconnecting the frame components.

5. Reassemble the panels and frame components according to the new configuration.

6. Ensure all connections are secure and panels are properly aligned.

INTRODUCTION

Welcome to a more productive workspace! Whether you seek relief from ambient noise, want to mitigate visual distractions, are dividing up a large and open area, or you’re simply looking for an easy and cost-effective alternative to traditional cubicles, you’ve chosen a system that will meet and exceed your expectations. And no matter where you plan to install your new modular wall system – it may be an office, healthcare clinic, school, or even at home – we would love to see your completed setup!

Understanding the Modular Wall System

Congratulations on your purchase of a Modular Wall System! We know you can’t wait to experience a quieter, less distracting environment, so let’s get started with a quick overview.

• Effortless “Drop-In” Assembly
  We designed the Modular Walls to be easy to put together. Each Modular Wall model consists of various frames and panel components that slide together for a simple, intuitive assembly.

• Multifunctional Inner Panels
  Depending on the model wall you purchased, it will contain two or three types of Inner Panels that can be arranged in any configuration you choose.

  • Sound-Dampening PET Panels: These fabric panels block out visual distractions and absorb 85% of the ambient noise that passes through them.
  • Acrylic Panels: These semi-transparent panels help reduce visual distractions while still allowing natural light to shine through.
  • Whiteboard Panels (select models): These magnetic panels block visual distractions and allow for easy notetaking and collaboration.

• Expandable and Reconfigurable Design
  You can reconfigure or add to your Modular Wall system to adapt to your growing organization’s needs. The key is to understanding the difference between a Starter Wall and an Add-On Wall.

  • A Starter Wall has Vertical Frame Columns and Feet at both ends, allowing it to be freestanding by itself without being connected to other walls. If you would like to connect multiple Add-On Walls together, a Starter Wall is needed as the “anchor” of any Modular Wall system.
  • An Add-On Wall has a Vertical Frame Column and a Foot at only one end. The other end must be attached to either a Starter Wall or to another Add-On Wall that is part of a complete Modular Wall system. Add-On Walls can attach at either a 90° angle or in a straight line.

Component Overview

• Feet
  These pieces support the wall, allowing it to be freestanding.

• Foot Frame Inserts
  These pieces connect the Feet to the Vertical Frame Columns.

• Vertical Frame Columns
  These pieces hold the inner panels in place and connect walls to each other.

• Horizontal Frame Support/Cable Raceway
  This piece connects the two Vertical Frame Columns. It also contains the Cable Raceway, which you can use to keep cords organized.

• Narrow and Medium Inner Panels
  These pieces slide down the Frame Columns and can be arranged to suit the needs of the user. Depending on the width of the wall, there will be either two or three panels across. Depending on the height of the wall, the panels may be stacked two or three high.

• Wide Inner Panels
  These pieces also slide down the Frame Columns. With the Wide Panels, there will always be just one panel across. But depending on the height of the wall, they may be stacked two or three panels high.

• Horizontal Panel Separators
  These pieces fit between rows of Inner Panels. They’re used for Narrow, Medium, and Wide Inner Panels.

• Horizontal Panel Separators
  These pieces fit between inner panels placed side by side. They’re only used in walls containing Narrow and Medium inner panels. They’re not included in walls containing Wide Inner Panels.

Assembly Tips

• When assembling your system, assemble the Starter Wall first, then assemble and attach Add-On Wall(s).

• Before inserting panels, check to make sure the Cable Raceway is facing toward your desk.

• Pre-plan the arrangement of your Inner Panels before inserting them into the frame. Take into account natural light sources, positioning of your desk, distractions you’d like to block out, etc.
  NOTE: You may also choose to arrange Inner Panels based on the suggested layout in these instructions.

• When dropping the Cable Raceway and Horizontal Panel Separators into the Vertical Frame Columns, take care to drop both ends down evenly. Do not let one side drop down faster than the other.

Cleaning and Care

PET Panels

1. Using an upholstery attachment, vacuum to remove dust and loose dirt.
2. Lightly mist using an alcohol solution in a spray.
   • Do not saturate.
   • NOTE: Lysol aerosol spray has also been tested and found safe on SUDS fabrics.
3. Allow to air dry.
   IMPORTANT: DO NOT clean with soapy water, as this may cause discoloration.

Whiteboard Panels

1. Clean using a mild solution of water and dish soap.

   • Apply the solution using a spray bottle and wipe using a clean cotton towel or microfiber cloth.
   • Avoid paper towels, as they can cause scratches.
   • Follow up by wiping with a second cloth dampened with water

2. Disinfect using an alcohol wipe or by using a clean cotton or microfiber cloth dampened with a 70% alcohol solution.
   Avoid paper towels, as they can cause scratches.

3. Allow to air dry.

Frosted Acrylic Panels

1. Using a spray bottle, apply a solution of soapy water to dampen the entire surface you wish to clean.
2. GENTLY wipe using a clean microfiber cloth and gently buff to remove the remaining liquid.
3. If any smudges remain, repeat the process on the affected area.
   IMPORTANT: DO NOT use paper towels and/or ammonia-based products like glass cleaners, as these will permanently damage the acrylic. Only use clean microfiber cloths, water, and mild dish soap.

Table of Contents: Starter Wall Assembly Instructions

Assembly Instructions

• 53” x 48” Starter Wall, Narrow & Medium Inner Panels
  Part Numbers: 5348-FCG, 5348-FCGB, 5348-FWCG, 5348-FWCGB

• 53” x 48” Starter Wall, Wide Inner Panels
  Part Numbers: 5348-FWCGWB, 5348-FWCGWG

• 53” x 70” Starter Wall, Narrow & Medium Inner Panels
  Part Numbers: 5370-FCG, 5370-FCGB, 5370-FWCG, 5370-FWCGB

• 53” x 70” Starter Wall, Wide Inner Panels
  Part Numbers: 5370-FWCGWB, 5370-FWCGWG

• 70” x 48” Starter Wall, Narrow & Medium Inner Panels
  Part Numbers: 7048-FCG, 7048-FCGB, 7048-FWCG, 7048-FWCGB

• 70” x 48” Starter Wall, Wide Inner Panels
  Part Numbers: 7048-FWCGWB, 7048-FWCGWG

• 70” x 70” Starter Wall, Narrow & Medium Inner Panels
  Part Numbers: 7070-FCG, 7070-FCGB, 7070-FWCG, 7070-FWCGB

• 70” x 70” Starter Wall, Narrow & Medium Inner Panels
  Part Numbers: 7070-FCG, 7070-FCGB, 7070-FWCG, 7070-FWCGB

Table of Contents: Add-On Wall Assembly Instructions

Assembly Instructions

• 53” x 48” Add-On Wall, Narrow & Medium Inner Panels
  Part Numbers: 5348-XCG, 5348-XCGB, 5348-XWCG, 5348-XWCGB

• 53” x 48” Add-On Wall, Wide Inner Panels
  Part Numbers: 5348-XWCGWB, 5348-XWCGWG

• 53” x 70” Add-On Wall, Narrow & Medium Inner Panels
  Part Numbers: 5370-XCG, 5370-XCGB, 5370-XWCG, 5370-XWCGB

• 53” x 70” Add-On Wall, Wide Inner Panels
  Part Numbers: 5370-XWCGWB, 5370-XWCGWG

• 70” x 48” Add-On Wall, Narrow & Medium Inner Panels
  Part Numbers: 7048-XCG, 7048-XCGB, 7048-XWCG, 7048-XWCGB

• 70” x 48” Add-On Wall, Wide Inner Panels
  Part Numbers: 7048-XWCGWB, 7048-XWCGWG

• 70” x 70” Add-On Wall, Narrow & Medium Inner Panels
  Part Numbers: 7070-XCG, 7070-XCGB, 7070-XWCG, 7070-XWCGB

• 70” x 70” Add-On Wall, Wide Inner Panels
  Part Numbers: 7070-XWCGWB, 7070-XWCGWG

Frequently Asked Questions

• Do I always need a Starter Wall, or can I just connect two Add-On Walls?
  You must always have a Starter Wall in your wall system.

• Can I connect two Starter Walls?

  • Yes, but you will end up with an unused Vertical Frame Column and Foot.
  • If expanding your system, always select Add-On Walls.

• Can I connect a 70”-tall Add-On Wall to a 48”-tall Starter Wall?
  No. The Starter Wall must be taller or the same height as the Add-On Wall.

• Can I take my Modular Wall System apart?
  Yes. Simply disassemble in the reverse order as outlined in the instructions.

• Is there a limit to how many Add-On Walls I can connect to a Starter Wall?
  No! The system is infinitely expandable. The only limitation will be your available space

Warranty

Luxor Modular Wall products are covered by a 5-year manufacturer’s Limited Warranty against defects and workmanship. Any product that is defective in either materials or workmanship will be repaired or replaced at the manufacturer’s discretion. This warranty does not cover damage in transit or any modification to the product by the customer. This warranty is for five years from the date of purchase of the product, provided the product is used for its intended purpose and used with weight loads not exceeding those recommended. This warranty does not cover any problems which result from improper set-up, unauthorized modification, normal wear and tear, abuse, or environmental damages, including fire, hurricane, or flood.

• Rental Applications: Since rental applications do not fall under the category of normal usage, Luxor will be unable to provide the Limited Warranty on units used for rental applications. We will, however, make parts and/or entire units available at a special purchase price upon request.
• Limitations: Regardless of how carefully you use or care for your product, it will eventually show age and wear, and coverage does not include the expected age and wear of products. Neither the consequential costs of repairing or replacing other property damaged in the event of our product malfunctioning nor incidental loss of time, loss of use, etc. damages are not recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Other limitations may apply depending on the model purchased. For details, send an email to info@luxorworkspaces.com or call 800- 323-4656.

WARNING: Proper Care and Cleaning of Acrylic – PLEASE READ
BEFORE INSTALLING: Acrylic sheeting can be damaged by harsh solvents and cleaners. Only use cleaning products labeled “commercial plastic cleaners” or mild soap and water to remove dirt and debris. When applying the cleaner, use a non-abrasive, lint-free, or microfiber cloth that won’t scratch the surface. Never use products containing ammonia, acetone, carbon tetrachloride, scouring compounds, alcohol, bleach, aromatics, or gasoline. Chemical glass cleaners (even if they are environmentally friendly, organic, or non-scented) are also not to be used. All solvents need to be wiped clean with fresh water and blotted dry to reduce and prevent water spotting. Failure to adhere to the above guidelines can cause yellowing, cracks, and scratches in acrylic sheeting and may give the surface a frosted appearance. It will also void the Limited Warranty – our Limited Warranty does not apply to any damage caused by or the result of improper cleaning, handling, installation, operation, maintenance, pressure washing, accident, fire, natural disaster, explosion, abuse, vandalism, chlorine, chemicals from sprinkler systems, or other external forces. This warranty shall be null and void if any harmful solvents are used to clean.

References

• Luxor - An industry leader in developing furniture solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>