dji ‎CP.ZM.00000064.01 Osmo Mobile 2 Handheld Gimbal User Guide

: June 15, 2024
: DJi

Table of Contents

Product Description
In the Box
Installing the DJI GO App
Charging and Powering On/Off
Mounting and Balancing a Mobile Phone
Connecting to the DJI GO App
Controls
Specifications
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

dji ‎CP.ZM.00000064.01 Osmo Mobile 2 Handheld Gimbal

dji ‎CP.ZM.00000064.01 Osmo Mobile 2 Handheld Gimbal

Product Description

The OSMOTM Mobile 2 is a gimbal that turns your mobile phone into a smart motion camera by stabilizing it during movement. A mobile phone can be mounted to the Osmo Mobile 2 either horizontally or vertically. It is easy to use, and features such as Active Track, Timelapse, and Pano are available through the DJI GO app.

Mobile Phone Holder
Pan Motor
Joystick
Power/Mode Button
Charging Port (Micro USB)
Shutter/Record Button
System Status LED
Battery Level Indicators
Tilt Motor
Adjustable Arm
Balance Adjustment Knob
Roll Motor
Holder Lock Knob
USB Port
1/4”-20 UNC Port
Zoom Slider

In the Box

Mobile Phone Gimbal × 1
Power Cable × 1

Installing the DJI GO App

Search for ‘DJI GO’ on the App Store or Google Play, and install the app on your mobile phone.

DJI GO supports iOS 10.0 (or later) and Android 4.4 (or later).

Charging and Powering On/Off

To charge the Osmo Mobile 2, connect the USB adapter (not included) to the charging port using the provided power cable.

The battery is fully charged when the Battery Level Indicators turn solid white.

USB Adapter Charging Time: 2 hours (when charging at 2 A) Max Run-Time: 15 hours*

With the Osmo mobile 2 powered off, press the Power/Mode button once to check the battery level. Press and hold the button for 1.5 seconds to power on/off.
Charging and Powering On/Off

Max run-time was tested with the gimbal balanced and held steadily. This value should be taken for reference only

The Osmo Mobile 2’s USB port is capable of charging mobile phones.
Charging and Powering On/Off

Connect the USB port to your mobile phone using a standard Micro USB cable to start charging when the Osmo Mobile 2 is powered on. Press the Power/Mode button once to start charging when the Osmo Mobile 2 is powered off.

The Osmo Mobile 2 cannot charge mobile phones while charging itself. Do not connect the USB port to a mobile phone while the Osmo Mobile 2 is charging.

Mounting and Balancing a Mobile Phone

Make sure to only mount and balance a mobile phone while the Osmo Mobile 2 powered off.

Mount the Mobile Phone Horizontally

Place the mobile phone in the mobile phone holder while pulling out the holder. It is recommended to keep the mobile phone close to the right.
Adjust the position of the mobile phone holder. The tilt axis is balanced if the mobile phone remains still when released.
Mounting and Balancing a Mobile Phone
The roll axis is balanced if the mobile phone remains level when released.

If the roll axis tilts to the left, pull out the arm until the roll axis remains level.

Mount the Mobile Phone Horizontally

To mount the mobile phone vertically, loosen the Holder Lock Knob and rotate the mobile phone holder for 90 degrees to mount and balance the mobile phone.
Hold the Osmo Mobile 2 horizontally, and then pull the mobile phone until the mobile phone remains still when released.

The roll axis is balanced if the mobile phone remains level when released.
Mounting and Balancing a Mobile Phone
Adjust the Adjustable Arm to obtain roll axis balance.

If the roll axis cannot balance by adjusting the arm, pull the mobile phone holder left to balance.

Ensure the system is balanced and the Balance Adjustment Knob and Holder Lock Knob are tightened before use.

Connecting to the DJI GO App

Enable Bluetooth on your mobile phone.
Power on the Osmo Mobile 2.
Launch the DJI GO app and then follow the instructions to connect to the Osmo Mobile 2.
Activate the Osmo Mobile 2 when using it for the first time. This requires an internet connection.

Controls

Use the joystick to pan or tilt the mobile phone.
Position the mobile phone directly by hand (in Follow mode).

Controls

DJI GO advanced features:

Active Track : Mark an object on your screen to track it as it moves.
Time lapse : To capture a timelapse video in different modes.

Burst capture is available on iOS only.

Specifications

General

Name OSMO MOBILE 2
Model OM170
Dimensions 295×113×72 mm (folded)
Weight 485 g
Consumption 1.2 W (steady and balanced status)
Controllable Range Pan: ±160°; Tilt: ±155° (with the mobile phone mounted horizontally)
Mechanical Range Pan: ±170°; Roll: -90° to +70°; Tilt: ±170°
Max Controllable Speed 120°/s
Mobile Phone Width Range 58.6 – 85 mm

Wireless

Mode Bluetooth Low Energy 4.0
Transmitter Power (EIRP) <1 dBm

Battery

Type 18650 LiPo
Capacity 2600 mAh
Energy 18 Wh
Voltage 7.2 V
Charging Temperature 41° to 104° F (5° to 40° C)
Operating Temperature 32° to 104° F (0° to 40° C)