CLV B04-21RFLB-C-E 60W LED RGB Floodlight Instructions
- June 15, 2024
- CLV
Table of Contents
CLV B04-21RFLB-C-E 60W LED RGB Floodlight
Thank you for purchasing as products. To ensure a better shopping experience,
please follow the instructions for use step by step. If you have any questions
about our products, please contact our customer service, our after-sales team
will contact you at the first time and resolve any problems about the
products.
E-mail: [email protected]
[email protected]
Warning
- The LED module can’t be replaced, you need to replace the entire lamp if it damaged or reach the service life.
- If the wire is damaged, the lamp can no longer be used and needs to be scrapped.
- If the casing breaks or water enters, the lamp can no longer be used and needs to be scrapped.
- Do not stare at the LED light-emitting surface closely for a long time, to prevent the hurt of the eye.
- Under no circumstances should the luminaire be covered by a thermal pad or similar material.
- The Lamp requires professional electrician to install.
- The IP66 waterproof grade is just for rainproof, the lamp can not be immersed in water, otherwise it may cause leakage.
Component and structure diagrams
- Shell of flood light
- Lighting units
- Reflector
- Glass mask / PC cover
- Trestle
- Plug
- Screw
Parameter
How to install
- Step 1: Drill two mounting holes according to the distance of the screw holes on the bracket.
- Step 2: Place the bracket on the prepared mounting hole and fix it with screws and adjust the angle.
- Step 3: Insert the plug into the power outlet and turn on the power to ensure that the product is working properly, install batteries in the remote and then you can adjust it to your preferred mode.
Warning
- The flood-light has a built-in RF receiver. The remote control could control the product within 12 meters.
- Please replace the remote control battery if the remote control is not sensitive or the control distance becomes shorter(maybe the battery is exhausted).
Functions
Memory Function: Lighting color remains as the previous setting when turned on again.
Remote Control
Trouble Clearing
If the product does not work, please confirm whether it is caused by the following reasons.
- The floodlight does not turn on after turning on the power. Please make sure the remote control is aimed at the light, then press “ON”.
- The input voltage does not match the product. Please let a professional electrical to check whether the power supply voltage meets the voltage requirements of the light.
- If you still can’t solve the problem according to the instructions, please stop using it and contact an electrical professional or directly contact customer service to get assistance.
Routine maintenance
- Please clean the light regularly to ensure the product works well.
- Please make sure the power is off before maintenance.
- Please do not clean it with chemicals to avoid damage to the lamp.
Company name: Shenzhen Oumeike Lighting Technology Co., Ltd.
Address: No. 19-20, Anye Road, Yuanshan Street, Longgang District,
Shenzhen, Guangdong, China ( +86 0755-28608199)
C&E Connection E-Commerce (DE) GmbH Zum Linnegraben 20, 65933, Frankfurt am
Main, Germany
E-mail:[email protected]
Tel: +49 (069)27246648
CET PRODUCT SERVICE LTD.
Be acon House Sto ken church Busin e ss Park, Ib sto n e Rd, Sto ken church
High Wycombe HP 143F E UK
Tel: +447419325266
E-mail:[email protected]
http://www.clv-ledlight.com
E-mail: [email protected]
E-mail: [email protected]