CLV B04-22SW-RGB-C-B Luci Solari Esterno Giardino Instruction Manual

June 1, 2024
CLV

CLV B04-22SW-RGB-C-B Luci Solari Esterno Giardino

CLV B04-22SW-RGB-C-B Luci Solari Esterno Giardino 

Thank you

Thank you for purchasing products. To ensure a better shopping experience, please follow the instructions for use step by step.

If you have any questions about our products, please contact our customer service, our after-sales team will contact you at the first lime and resolve any problems about the products.
E-mail: clysales01@clytools.com
service@clv-ledlight.com

Attention

  1. Because the solar panel is charging during the day, the light control mode will not light up during the day, if you want to test the product during the day, please disconnect the solar panel connection cable or cover the solar panel with an object to simulate the night environment.
  2. The working time of the light is related to the sunlight charging lime, sunny day charging effect will be better than the rainy day. such as continuous rainy weather, the light may not be turned on because it’s not charged , but wait for the sunlight is sufficient, ii will be charged and light up again.
  3. Please install the product in a place with sufficient sunlight, note that the place like tree shade or glass will effect the charging effect.
  4. When you received the product for the first time, please fully charged in full sunlight before using ii (at least 8 hours or more), to ensure the duration of the light.
  5. Please clean the solar panel regularly to ensure the charging effect.
  6. Please do not disassemble and modify the product by yourself to avoid product damage.
  7. The product contains batteries, please keep away from fire, this product is waterproof IP66. Do not use it in water.

Parameters Table

Model

| Solar Panel| Working Voltage| Color Temperature| Brightness| Waterproof Rating| Extension Cord| Control Method| Lamp Body Material|

Ta

---|---|---|---|---|---|---|---|---|---

SL-SP04

| 6V/6W| 3V/DC| RGB| 100 % – 25%| IP66| 9M| Light Control / Remote Control| PC/ABS|

-25 C ~ 40C

S L -SP06| 6V/8W| 3V /DC| RGB| 100 % – 25 %| IP66| 11M| Light Control / Remote Control| PC/ABS|

-25 C ~ 40C

Product Models/Size/Accessories

Product Models/Size/Accessories
Product Models/Size/Accessories

Solar Panel Installation

  • Ground-mounted

  • Wall mounted

Note: The solar panel needs to be installed in a place where there is sufficient sunlight. Note that places like tree shade or glass will affect the charging effect.

Spotlight Installation

  • Ground-mounted

  • Wall mounted

How To Work

Wiring And Mounting Bracket

Wiring And Mounting Bracket

Control box and Light and solar panel extension cord connections: Connect the male and female ends of the extension cord and lighten the waterproof cap.

Control Box Function Introduction

Control Box Function Introduction

  1. Input: Input Lead

  2. : Charging Indicator ( The indicator lights up when charging)
    12: Power Indicator ( LED “2” stays on after power on )
    Note: Due to the various brightness adjustments of the RGB lights, only the LED “2” will be on.

  3. Power Switch: ( On – Off and cycle )

  4. Battery Indicator: ( One light stays on means 30% battery; 2 lights stays on means 70% battery; 3 lights stays on means 100% battery )

  5. Output: Output Lead

Remote Control Introduction

OFF: Tum off
ON: Tum on
Brightness Up:6 levels of brightness (25%-40%-55%-70%-85%-100%)
Brightness Down :6 levels of brightness (100%-ll5%-70%-55%-40%-25%)
R:Red
G:Green
B: Blue
W:While
FLASH fast jump mode (R+ G + B), press@ @to adjust the jump speed
SMOOTH slow gradual change mode (colorful), press to adjust the gradual change speed
Red/Green: In ( R+G ) Flash Mode, press to adjust the strobe speed
Red/Purple: In ( R+VT ) Flash Mode, press to adjust the strobe speed
Red/Blue: In ( R+B ) Flash Mode, press to adjust the strobe speed

Warning

  1. There is a battery inside, high temperature and violent impact are prohibited. Keep away from fire.
  2. Do not stare at the LED light-emitting surface closely for a long lime to prevent the hurt to the eyes.
  3. Under no circumstances should the luminaire be covered by a thermal pad or similar material.

Customer Support

Company name: Shenzhen Oumei ke Lighting Technology Co., Ltd.
Address: No. 19-20,Anye Road, Yuanshan Street,Longgang District, Shenzhen, Guangdong, China (+86 0755-28608199)

C&E Connection E-commerce (DE) GmbH
Zurn Linnegraben 20, 65933, Frankfurt am Main, Germany
E-mail: info@ce-connection.de Tel:+49 (069) 27246648

 CET PRODUCT SERVICE LTD.
Beacon House Stokenchurch Business Park, lbstone Rd, Stokenchurch High Wycombe HP14 3FE UK
Tel:+447419325266 E-mail : info@cetproduct.com

http://www.clv-ledlight.com
E-mail: clysales01@clytools.com
E-mail: service@clv-ledlight.com

Symbols

Symbols

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals