CLV B04-21FL06-C-D 30W Solar LED RGB Outdoor Spotlight User Manual

CLV B04-21FL06-C-D 30W Solar LED RGB Outdoor Spotlight

Thank you for purchasing CL products. To ensure a better shopping experience, please follow the instructions for use step by step.
If you have any questions about our products, please contact our customer service, our after-sales team will contact you at the first time and resolve any problems about the products.

E-mail: [email protected] service @clv-ledlight.com

Attention

1. The luminaire should be placed in suggested installation height, please do not prolonged stare into the luminaire for more than 3 seconds within 2 meters.

2. The light source is not replaceable, when it reaches the end of its life, the whole luminaire needs to be replaced.

3. Because the solar panel is charged during the day, it will not turn on during the day. If you want to test the light during the day, please cover the solar panel or go to a dark room to test. (Do not shine the light on the solar panel in a dark environment, otherwise the light will flicker with high frequency)

4. The working time of the lamp is related to the charging time. The charging effect on a sunny day will be better than that on a rainy day.
   In the case of continuous rainy days, the light may not be turned on because it is not charged. Please charge 8H when the sunlight is sufficient, the lamp will turn on again.

5. Please install the solar panel in a place that can get sufficient sunlight.
   Note that the place like tree shade or glass will affect the charging effect.

6. When you receive the product for the first time, please fully charge it before using it (at least 8 hours or more) to ensure the duration of the light.

7. Please clean the solar panel regularly to ensure the charging effect.

8. Do not disassemble and modify the product by yourself to avoid product damage.

9. Please stay away from fire sources. The waterproof rating of this product is IP66. Do not use it in water.

Parameter

Model| Solar Panel| Working Voltage| Color Temperature| Lighting Angle| Projection Distance| Brightness| Waterproof Rating| Extention Cord| Control Method| Lamp body Material| Ta
---|---|---|---|---|---|---|---|---|---|---|---
SL-FL06-A| 6V/4W| 3V/DC| RGB| A1| A2| A1| A2| Adjustable| IP66| 5M| Light Control/ remote control| PC| -25 C-40 C
120°| 15°| 3M| 5M
SL-FL06-B| 6V/4W| 3V/DC| RGB| 25°| 5M| Adjustable| IP66| 5M| Light Control/ remote control| PC| -25(-40(
SL-FL06-C| 6V/3W| 3V/DC| RGB| 60°| 3M| Adjustable| IP66| 5M| Light Control/ remote control| PC| -25 C-40 C

Product models/size/accessories

Solar panel installation

Note: The solar panel needs to be installed in a place where there is sufficient sunlight. The installation location like tree shade or glass will affect the charging effect.

Flood light installation

Wiring guide

Connect the male and female ends of the extension cord and tighten the waterproof cap.

Product details

1. ON/OFF: Lamp power switch
2. Work Indicator Light:
   • Light 1 on the left: Battery Indicator: Green light on indicates that the power supply is normal, light off indicates the battery is not supplying power.
   • Light 2 on the left: Solar Panel Indicator: Red light on means that the solar panel charges normally, the light off means the solar panel not charged.
3. Battery Power Indicator:
   • Light 1 on the right: green light is on, about100% battery power
   • Light 2 on the right: green light is on, about 70% battery power
   • Light 3 on the right: green light is on, about 30% battery power

Functions

Memory Function: Lighting color remains as the previous setting when turned on again.

Remote Control

SMOOTH slow gradual change mode (colorful), press adjust the gradual change speed to

2H / 4H / 6H Timing function:
Press the 2H / 4H / 6H key in any mode, indicating that the light will automatically turn off after the light works 2 hours/4 hours/6 hours.
(Flash 2 times after press the timing keys means it starts timing)

Notice
If you use the remote control to manually turn off the light or set a timer to turn the light off. In this case, the lamp cannot be automatically turned on the next night, and you need to use the remote control to turn it on.

FAQ

Q: The lamp doesn’t work,
A:

1. Make sure the lamp is switch on.
2. The battery is out of power, please charge the battery by solar panel in direct sunlight.

Q: Lighting time is short.
A:

1. The working time depends on the power which stores in the rechargeable battery. (The battery can only be fully charged in a sunny environment)
2. The more power it charges during the day, the longer time it works during the night.

Q: Charging time.
A: Charging for over 8 hours is recommended. The solar product’s charging time is affected by weather condition and installation location.

Q: Working hours.
A: When the battery is fully charged, Light control type: work for about 10 hours in 100% brightness mode, and about 40 hours in 25% brightness mode.

Warning

1. There is a battery inside, high temperature and violent impact are prohibited. Keep away from fire.
2. Do not stare at the LED light-emitting surface closely for a long time to prevent the hurt to the eyes.
3. Under no circumstances should the luminaire be covered by a thermal pad or similar material.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>