CLV B04-21UXQD 2P RGB Flood Light Bar User Manual
- June 15, 2024
- CLV
Table of Contents
CLV B04-21UXQD 2P RGB Flood Light Bar User Manual
Warning
- The LED module can’t be replaced, you need to replace the entire lamp if it damaged or reach the service life.
- If the wire is damaged, the lamp can no longer be used and needs to be scrapped.
- If the casing breaks or water enters, the lamp can no longer be used and needs to be scrapped.
- Do not stare at the LED light-emitting surface closely for a long time, to prevent the hurt of the eye.
- Under no circumstances should the luminaire be covered by a thermal pad or similar material.
- The Lamp requires professional electrician to install. –
- The IP66 waterproof grade is just for rainproof, the lamp can not be immersed in water, otherwise it may cause leakage.
Note: This is a UV lamp. The human eye can only detect a small part of the light, so it will look a little dim when lit. As it is mainly used for fluorescent reactions and other purposes, if you only want to buy purple light, this UV light is not recommend.
Component and structure diagrams
Parameter
| Model | Power | Installation Height | Lighting Range |
|---|---|---|---|
| uwLoo18 | 18W | 2.5-3.5M | 3-4M |
| UwL0028 | 28W | 2.5-3.5M | 3-4M |
| UWL0036 | 36W | 3.0-5.0M | 3-4Mm |
| UWL0048 | 42w | 3.5-5.0M | 3-4M |
| UWL0056 | 56W | 3.5-5.0M | 4-6M |
| UWL0068 | 68W | 3.5-5.0M | 4-6M |
Input voltage: US: AC 120V/60HZ EU/UK: AC 230V/50HZ
Wavelength: 395-400NM
IP rating: 1P66
Ta: -25~40C
How to install
Step 1: Install the bracket on the lamp body with screws.
Step 2: Drill holes according to the position of the bracket.
Step 3: Place the bracket in the prepared mounting position and fix it
with screws.
Step 4: Adjust the direction of the light as needed.
Step 5 : Connect the wires (Warning: Make sure the power is off before
wiring).
Step 6 : After installation, turn on the switch of the breaker and move
the lamp control switch to the “on” side
Routine maintenance
- To ensure better lighting, please clean the fixtures regularly.
- Before maintenance, make sure the power is disconnected.
- To avoid damage of the lamp, please do not clean it with chemicals.
Thank you for purchasing @3 products. To ensure a better shopping experience, please follow the instructions for use step by step.
If you have any questions about our products, please contact our customer service, our after-sales team will contact you at the first time and resolve any problems about the products.
E-mail: [email protected]
s[email protected]