SOUNDPEATS GoFree2 Wireless Earbuds User Guide
- June 15, 2024
- SoundPEATS
Table of Contents
GoFree 2
WIRELESS EARBUDS User Guide
First Time of Use
- Open the cover of the charging box, take out the two earphones, remove the insulating film on the two earphones, and then put the two earphones back into the charging compartment. At this time, the left and right earphones will automatically enter the TWS mutual matching state. Both headsets enter pairing mode.
- Jurn on the Bluetooth of the device, and then select SOUNDPEATS Go Free 2 from the Bluetooth list to complete the pairing.
Connecting two devices
- Please download the SOUNDPEATS Official APP according to the card guide in the package.
- Please open the SOUNDPEATS APP. find and choose to open multipoint connection function.
- The operation steps are as follows:
1)Please pair the headset with device A first, and then turn off the Bluetooth function of device A after confirming that the pairing is completed.
2)Next, please repeat the pairing operation to connect the earphones to device B, keep the connection between the earphones and device B.
3)Finally, turn on the bluetooth function of device A and pair it with the earphones, you can use the multipoint connection function.
After manually pairing two Bluetooth devices for the first time, the Bluetooth connection will be established automatically from the second time.
LDAC cannot be used during multipoint connection,
Reset
Please put the two earphones into the charging case correctly, keep the charging case cover open, and then press and hold the touch buttons of the two earphones at the same time for 10 seconds to reset successfully (after the reset is successful, the two earphones will automatically enter the pairing state. After the left and right earphones are paired successfully, the earphones will play the “Paring” prompt tone) “Please perform this operation within two minutes of closing and opening the cover again after putting the earphones into the storage compartment.
Wearing
- Identify left and right earphones.
- Rotate the headset and find the most comfortable position.
Product Diagram
Control
Power On| Automatic: Open the charging case cover
Manual: Long press the touch button for 1.5s
---|---
Power Off| Automatic: Put the earbuds back into the charging case and close
the lid
Manual: Long press the touch button for lOs
Play / Pause| Double tap the touch button
Volume-| Single tap the left touch button
Volume +| Single tap the right touch button
Play next| Long press the right touch button for 1.5s
Play previous| Long Press the left touch button for 1.5s
Answer/Hang up phone call| Double tap the touch button
Reject phone call| Long press the touch button for 1.5s
Switch between two calls| Long press the touch button for 1.5s
Enter pairing mode manually| Long press the touch button for 6s
Activate voice assistant| Triple tap the right touch button
Enter game mode| Triple tap the left touch button
Q&A
Q1: What does the indicator light of the charging case display?
1. The battery life of the charging case:
| 100%-50% | Green |
|---|---|
| 49%-10% | Yellow |
| <10% | Red |
2. Charging status of the charging case:
| <20% | The Red light flashes slowly |
|---|---|
| 20%-69% | The Yellow light flashes slowly |
| 70%-99% | The Green light flashes slowly |
| 100% | The Green light stays on |
Q2: How to charge the charging case?
1.Connect the Type-C charging adapter to charge it (charging current does not exceed 1A). 2.When not in use for a long time, charge it at least once every three months.
Q3: Why is the earphone still connected to the phone after putting it back into the charging case and closing the lid?
1.The charging case has no power remaining. When the charging box is out of Power, the earphones cannot be turned off when they are put back. 2. Please make sure that the earphones are correctly placed in the charging box, and the charging metal sheet and PIN are clean. Please try to clean the charging contact between the charging box and the earphones with a soft cloth.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC ID
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference thatmay cause undesired operation of the device.”
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
MOZAMBEE SANAL MAGAZACILIK VE LOJISTIK
LiMiTED SiRKETi
Hocapasa Mahallesi Ankara Caddesi Halil Lutfu
Dérdtincti is Merkezi No:32 Kat:2 Daire:37/2 Fatih/ istanbul/Turkiye
Company: Qing UG(haftungsbeschrankt)
Address: Undinestr. 7, 12203 Berlin Germany
TANMET INT’L BUSINESS LTD
9 Pantygraigwen Road, Pontypridd,
Mid Glamorgan, CF37 2RR,UK
tanmetbiz@outlook.com
MANUFACTURER
Shenzhen SoundSOUL Information Technology
Company Limited
Room 1308-1309, Building B, Huihai Square,
Chuangye Road, Longhua District,
Shenzhen, China. 518109
support@soundpeats.com
www.soundpeats.com
FCC ID: 2AFTU-DD036
IC ID: 27785-YKQ08
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>