CHAMPION POWER EQUIPMENT 201183 Dual Fuel Gas Propane Inverter Generator User Guide
- June 15, 2024
- CHAMPION POWER EQUIPMENT
Table of Contents
CHAMPION POWER EQUIPMENT 201183 Dual Fuel Gas Propane Inverter Generator
User Guide
PARTS INCLUDED
DANGER
MOVE GENERATOR OUTDOORS
Using a generator indoors CAN KILL YOU IN MINUTES. Generator exhaust contains carbon monoxide. This is a poison you cannot see or smell.
NEVER use inside a home or garage, EVEN IF doors and windows are open.
ONLY use OUTSIDE and far away from windows, doors, and vents.
WARNING
Read the ENTIRE operator’s manual to become familiar with the features of this product before operation. This Quick Start Guide IS NOT a substitute for the Operator’s Manual.
Failure to operate the product correctly could result in damage to the product, personal property or cause serious injury or death
NOTICE
Keep all objects at least 5 feet (1.5 m) from generator. Heat from the muffler and exhaust gas can ignite combustible materials.
SET UP
Open shipping carton.
Assembly > Unboxing
Generators may inadvertently
be transported upside down causing residual oil to flow into the combustion
chamber causing smoke to emit from the exhaust. If smoke continues after
5-hour break-in period, contact Champion customer service at
1-877-338-0999.
Add oil.
Assembly > Add Engine Oil.
Recommended: 10W-30, up to 16.9 fl. oz. (500 ml) DO NOT overfill
Move the generator outdoors.
**** ONLY USE OUTSIDE AND FAR AWAY FROM WINDOWS, DOORS, AND VENTS.
START UP
Add fuel – Gasoline or Propane (LPG)
Assembly > Add Fuel
**DO NOT plug in any electrical devices
**
**** NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!
Starting the Engine: Gasoline
Manual Start
- Turn the fuel cap vent lever to the “ON” (|) position.
- Turn the EZ Start Dial to the gasoline “CHOKE” position.
- Pull the recoil to start the engine.
- Turn the EZ Start Dial to the gasoline “RUN” position.
Starting the Engine: Propane (LPG)
Manual Start : Propane (LPG)
- Open the propane tank valve.
- Turn the EZ Start Dial to the LPG “CHOKE” position.
- Pull the recoil 3-5 times to prime the engine.
- Turn the EZ Start Dial to the LPG “RUN” position.
- Pull the recoil to start the engine.
Plug in. Operation > Connecting Electrical Loads.
Visit our YouTube channel to watch our how-to videos and subscribe to view our latest videos on our Champion Power Equipment products!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>