Gazebo Penguin TM5X8200 Aluminum Storage Shed

ASSEMBLY

STEPS

1. Assemble arches 06-403 and 06-405. For the arches at each end, assemble arches 06-402 and 06-403 with 1¾” screws. Place 4 hooks M on each door rail 06-369 and attach the rails to end arches with 1¾” screws and wing nuts.
2. Assemble arches with connecting pipes 06-371 and 06-374, using 2½” screws and wing nuts.
3. Insert legs 06-401 into arches 06-405 one side at a time, and then legs 06 400 into arches 06-402.
4. Connect legs 06-400 and 06-401 with the connecting pipes 06-371 and 06 374 using 2½” screws.
5. Attach the diagonals 06-369 between two legs, on the inside of the shelter, using 1¾” screws. (See schema)
6. Before you install the roof, make sure the distances between the legs (AC, BD) are 5 feet wide, including the legs. Also verify that diagonal distances AD and BC are equal, and lengths AB and CD are equal.
7. Place cover over the completed structure making sure that the triangle is at the front of the shelter. Attach all the straps inside of the roof to the structure poles going completely around the garage. Tie firmly the inside ties to bars.
8. Place your shelter where you want to install it and close the door before anchoring the structure to the ground with the brackets K and nails J. The structure has to be anchored on a flat leveled surface as asphalt, concrete, etc. Additionnal anchors are not included.
9. Door has to be attached with elastics and S hooks.

SCHEMA

PARTS LIST

Part| Description| | QTY

---|---|---|---
06-400| 1¼” x 52 5/8″ Leg 2 Holes| | 2
06-401| 1¼” x 52 5/8″ Leg 1 Hole| | 4
06-402| 1¼” x 52 5/8″ Corner Arch 3 Holes| | 4
06-403| 1¼” x 27″ Center Arch| | 3
06-369| 1″ x 59¾” Diagonal + Door Rail| | 4
06-405| 1¼” x 52 5/8″ Corner Arch 1 Hole| | 2
06-371| 1″ x 50½” Connecting Pipe| | 5
06-374| 1″ x 48″ Connecting Pipe| | 5
L| Elastic + S-Hook| | 6
J| Nail| | 8
K| Floor Bracket| | 4
M-4| Door Rail Hook (set of 6 pcs)| | 8
O| Boulon 1¾” Bolt| | 14

Part| Description| | QTY

---|---|---|---

P

| 2½” Bolt| | 17

Q

| Wing Nut| | 29
| Cable guide| | 1
| Roof| | 1

WARRANTY

Carefully inspect the contents of the package to check if any components are missing or damaged. In the event that any parts are missing or damaged, do not return the product to the place of purchase; instead, contact Gazebo Penguin’s Customer Experience Department.

Montreal: 514-276-5643
Elsewhere in Canada and the United States: 1-800-737-7174
[email protected]

This product has been designed and manufactured to meet the highest standards of quality and durability. Subject to the «Warranty Terms» and «Warranty Limitations» sections below, it is warranted against defects in material or workmanship:

• 1 YEAR FOR THE WINDOWS
• 2 YEARS FOR THE CANVAS
• 5 YEARS FOR THE STRUCTURE

In the event that the product is damaged or the warranty period has expired, please contact Gazebo Penguin’s Customer Experience Department for a complete list of replacement parts and prices.

WARRANTY LIMITATIONS AND EXCLUSIONS

1. This product is not warranted against damage caused by wind, falling objects, fire, animals, vegetation, vandalism and extreme weather conditions.
2. Collapsed shelter caused by snow, ice and wind accumulation
3. The roof must be kept free of snow and ice accumulation at all times.
4. Any damage that may be caused by snow and ice build-up will not be covered by the warranty. Snow and ice must be removed from the roof, from right to left, in five-foot (5) sections at a time.
5. Removal of snow and ice from the roof must be done from the outside of the car shelter. Doing so from the inside may damage the product and may cause serious injury to the person(s) involved in the removal.
6. It is strongly recommended that the product not be placed adjacent to buildings or trees as snow or ice may slide off the roof. In the event that the product is placed adjacent to a building or tree, additional precautions must be taken to ensure that there is no accumulation of snow or ice that could cause excessive weight to the product.
7. The product is warranted only if installed in accordance with Gazebo Penguin’s written instructions included with the product.
8. The product is not warranted if it has been improperly anchored. In particular, the guide wires must be installed as shown. Anchors are not included for these guide wires and are dependent on the soil on which the shelter is installed.
9. In the event that the ground is not frozen when the product is installed, in addition to the floor hooks and nails, weights (not included) of at least 300 pounds for each 11’ x 16’ area must be installed.
10. Water infiltration through seams is not considered a manufacturing defect.
11. This product is not warranted against condensation, which may occur if the product is not installed on asphalt and the ground is not completely frozen at installation.
12. The cover/roof must be kept indoors if the outside temperature drops below +45°F/+7°C until it is placed on the frame. Otherwise, the windows may break and such breakage will not be covered by the warranty.
13. The covering material of this unit has been treated to resist damage from the sun’s ultraviolet rays. However, it is mandatory that this product be disassembled and stored during the summer months in order to extend the life of this product.
14. The cover/roof must be clean and dry before storage. We strongly recommend that the original box in which the product was delivered be kept for off-season storage.
15. Discoloration and normal wear and tear of the cover/roof. The color of the material may naturally change over time.

WARNING
Car shelter doors should be kept closed at all times, except when an engine is running, as there is a risk of asphyxiation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>