feelspot FS-HPS01W Smart Status Sensor Instruction Manual
- June 15, 2024
- FEELSPOT
Table of Contents
feelspot FS-HPS01W Smart Status Sensor
Product Function
Fretting detection
It can detect small movements, such as hand lifting, hand flicking, hand
turning, etc.| Presence detection
It can detect the human body standing still, squatting still, sitting still
and other static states.
---|---
Motion detection
It can detect walking, trotting, fast running, circling, jumping and other
movements.| Distance measurement
The target distance measurement function can accurately filter targets
outside the area.
illuminance detection Detectable muminance value| Log query
It can query the records of human existence and illumination change
Adjustable parameters Various parameters such as detection distance can
be set through app.| Fault detection
Equipment fault information can be self checked through app
Application Area
ZY-M100 micro motion sensor can be widely used in lighting, security, home
appliances, hotels, garages, buildings, transportation, IOT Internet of things
and other industries that need to detect human micro motion, motion and
control the detection distance.
Technical Parameter
Main parameters of sensor
Note: the top mounting is easier to detect “standing still and squatting”. For sitting still, the detection effect is slightly inferior to that of wall mounting; However, by setting greater sensitivity and longer delay time than wall mounting, more accurate detection can also be realized. Wall mounting can detect sitting, standing and squatting.
Test scope: top mounted
The following figure is the schematic diagram of the detectable area during
“top installation”.
- “Inching” detection area: it can detect inching (small actions such as leaning head, waving, raising hands, light start, turning books, slightly tilting left and right, back and forth), movement (walking, trotting, fast running, turning, high jump and other movements), existence (standing still, squatting still);
- “Presence” detection area: it can detect the human body in static state, such as standing still, squatting still, sitting still, etc. Detection area (related to installation height and sensitivity parameters);
- existing detection radius: 1 ~ 3M
- frettinq detection radius: 5 ~ 7M
Installation
Distribution network
- Note: The side wall version uses 5V USB power supply, and the ceiling version uses AC 80-250V power supply.
- After the product’s residual power supply is connected, the sensor indicator light remains on for 1 s to indicate successful power on. Press and hold the reset button for 6s until the indicator light flashes, and enter the distribution network process. Follow the device networking operation on the APP to complete the distribution network.
Installation
- Ceiling ceiling installation: Reserve holes in the ceiling with the size of 55mm, and install them on the ceiling gypsum board with clips on both sides.
- Side wall installation: remove the two metal clips, paste the double-sided adhesive tape on the blank space on the back and paste it in a suitable position.
Quality assurance
Under the normal use of users, the manufacturer provides free 2-year product quality warranty (except panel) replacement, and provides lifelong maintenance quality assurance beyond the 2-yearwarranty period.
The following conditions are not covered by the warranty
- Damage caused by external factors such as artificial damage or water inflow;
- The user disassembles or refits the product by himself (excluding panel disassembly and assembly);
- Beyond the technical parameters of this product losses due to force majeure such as earthquake or fire;
- Installation, wiring and use not in accordance with the manual;
- Beyond the scope of the product’s parameters and scenarios.