ThermElc TE-02 Pro TH Temperature Humidity Data Logger User Manual

: June 15, 2024
: ThermELC

Table of Contents

Product Introductions
Main Feature
Specification of ThermElc
First Time Set Up
Quick Start
Operation Functions
LCD Display Instructions
Battery Replacement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ThermElc TE-02 Pro TH Temperature Humidity Data Logger User Manual

Product Introductions

ThermElc TE-02 PRO TH is used for monitoring temperature and humidity of the sensitive goods during storage and transportation. TE-02 Pro TH is integrated with USB & Plug-N-Play features for auto-generating secured PDF & CSV report without requiring additional Hardware (cable/interface) or software. TE-02 Pro TH dataloggers are equipped with highly precise sensor with accuracy of ±0.5°C for entire range of – 30°C to +60°C and ±3% rH.

Main Feature

Multiple use temperature & humidity logger
Auto generates PDF reports
Auto generates CSV reports
Logging of 32000 points
No special device driver required
Temperature and humidity over-limit alarm

Specification of ThermElc

Type	Reusable / Multiple Use
Measurement Range	30°C to +60°C
Accuracy	±0.5℃(-30℃ to +60℃)
Humidity Range	0% to 100% rH
Humidity Accuracy	±3% rH
Memory Capacity	32,000 Values
Recording Interval	10 sec to 18 Hrs (Customizable)
Battery Type	3V / Replaceable CR2032
Dimension	89 mm x 36 mm x 16 mm
Weight	approx. 30 Grams
Certifications	EN12830, C
Validation Certificate	Hard Copy Included
Report	Self-Generated PDF + CSV
Alarm Range	High & Low Alarm
Connectivity	USB 2.0
Protection Class	IP65

First Time Set Up

Open your Internet browser and type in thermelc.com . Navigate to the menu bar,click on ‘Manuals & Software’.
Select the appropriate software for your model.
Click on the download link or the model picture to access the software download page.
Once the download is complete,click on the downloaded file to initiate the installation. Follow the steps to complete the installation process.
After installation, you can access the Temperature Management Software. by clicking on the shortcut icon on your desktop.
Full video instructions please go to youtube.com/@thermelc 2389 Click Playlists – How to use your Therm ELC Data logger

Quick Start

Quick start Therm ElcTE-02ProTH

Software Download
https://www.thermelc.com/pages/download config your parameter

Press start 3 seconds
Measure Monitoring
Read
Report Auto PDF. CSV Report Data & Graphic Comparison Available.
Helps
https://www.thermelc.com/pages/contact-us

Operation Functions

Start Recording
Press and hold the START button for approximately 3sec.The OK light is on and the ( ) or (WAIT) on screen indicates the logger is started.
Mark
When the device is recording, press and hold the START button for more than 3sec, and the screen will switch to the “MARK’ interface. The number of MARK’ will increase by one, indicating data was marked successfully.
Stop Recording
Press and hold the STOP button for more than 3sec until the STOP ( ) symbol displays on the screen, indicating stopping recording successfully.
Switch the display
Shortly press START button to switch to different display interface. The interfaces shown in sequence are respectively: Real-time Temperature > Real- time Humidity > LOG > MARK > Temperature Upper Limit > Temperature Lower Limit

Humidity Upper Limit > Humidity Lower Limit.
Get Report
Connect the data logger to PC via USB, and it will auto-generate PDF and CSV reports.

LCD Display Instructions

| Data logger is recording
---|---
| Data logger has stopped recording
WAIT| Data logger is in Start Delay status
| Temperature and Humidity is within the limited range
and | Measured value exceeds its upper limit
and | Measured value exceeds its lower limit