ThermELC TE-02 PRO Temperatuer and Humidity Data Logger User Manual
- June 14, 2024
- ThermELC
Table of Contents
TE-02 PROH
Temperature and Humidity
Data Logger
User Manual
Product Introductions
ThermElc TE-02 PRO H is used for monitoring temp- erature and humidity of the sensitive goods during storage and transportation. TE-02 Pro H is integrated with USB & Plug-N-Play features for auto-generating secured PDF & CSV report without requiring addit onal Hardware (cable/interface) or software. TE-02 Pro H dataloggers are equipped with highly precise sensor with accuracy of £0.5°C for entie range of – 30°C to +60°C and +3% rH
Main Feature
- Multiple use temperature & humidity logger
- Auto generates PDF reports
- Auto generates CSV reports
- Logging of 32000 points
- No special device driver required
- Temperature and humidity over-limit alarm
Specification of ThermElc
TE-02 PRO H
| Type | Reusable / Multiple Use | Dimension | 89 mm x 36 mm x 16 mm |
|---|---|---|---|
| Measurement Range | -30°C to +60°C | Weight | approx. 30 Grams |
| Accuracy | ±0.5°C(-30°C to +60°C) | Certifications | El112830, CE |
| Humidity Range | 0% to 100% rH | Validation Certificate | Hard Copy |
Included
Humidity Accuracy| ±3% rH| Report| Self-Generated PDF + CSV
Memory Capacity| 32,000 Values| Alarm Range| High & Low Alarm
Recording Interval| 10 sec to 18 Hrs (Customizable)| Connectivity|
USB 2.0
Battery Type| 3V / Replaceable CR2032| Protection Class| IP65
Quick Start
Quick Start
ThermELC TE-02 PRO H
-
softvare Dowrioas.
https://www.thermelc.com/pages/download**** config your parameter -
Press start 3 seconds
-
Measure Monitoring
-
Read
-
Report Auto PDF. CSV Report Data & Graphic Comparison Available
Operation Functions
-
Start Recording
Press and hold the START button for approximately 3sec.The OK light is on and the ( ) or (WAIT) on scr- een indicates the logger is started. -
Mark
When the device is recording, press and hold the START button for more than 3sec, and the screen will switch to the “MARK’ interface. The number of MARK” willincrease by one, indicating data was marked suc- cessfully. -
stop Recording
Press and hold the STOP button for more than 3sec until the STOP ( ) symbol displays on the screen, indicating stopping recording successfully. -
Switch the display
Shortly press START button to switch to different dis- play interface. The interfaces shown in sequence are respectively: Real-time Temperature > Real- time Hu- midity > LOG > MARK > Temperature Upper Limit > Temperature Lower Limit > Humidity Upper Limit > Humidity Lower Limit. -
Get Report
Connect the data logger to PC via USB, and it will auto-generate PDF and CSV reports.
LCD Display Instructions
| Data logger s recording
---|---
| Data logger has stopped recording
WAIT| Data logger s in Sart Delay satus,
√| Temperature and Humidity Is within the limited range
Xand↑| Measured value exceeds it upper limit
Xand↓| Messured value exceeds s lower imit
Battery Replacement
Technical Support
https://thermelc.com/pages/support
Video Instruction
https://www.youtube.com/channel/UCVcVdaeDAISsSzAxqYYj_jw
https://www.thermelc.com
[email protected]
+44 (0)207 1939 488