CHAMPION POWER EQUIPMENT 201184 Wireless Remote Start Inverter Generator User Guide

June 15, 2024
CHAMPION POWER EQUIPMENT

CHAMPION POWER logoQUICK START GUIDE
EQUIPMENT 201184 Wireless

Remote Start Inverter Generator
User Guide

201184 Wireless Remote Start Inverter Generator

CHAMPION POWER EQUIPMENT 201184 Wireless Remote Start Inverter
Generator201184
4500W Wireless Remote Start Inverter Generator

WARNING:
Read the ENTIRE operator’s manual to become familiar with the features of the product before operating.
Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury or even death.

Set Up

  1. Open shipping carton. Assembly > Unpacking

  2. Shipping Support. Assembly > Remove Shipping Support Hardware.CHAMPION POWER EQUIPMENT 201184 Wireless Remote Start Inverter Generator - Set Up1

  3. Connect the battery. Assembly > Connect the Battery.
    Push two halves of battery connector together tightly.

  4. Add oil. Assembly > Add Engine Oil.
    Recommended: 10W-30, up to 16.9 fl. oz. (500 ml) DO NOT overfill.

  5. Move the generator outdoors.
    Move generator to an open, outdoor area. Point exhaust away. Never run generator in enclosed areas (e.g., not in house or garage). Keep all objects at least 5 feet (1.5 m) from generator. Heat from the muffler and exhaust gas can ignite combustible materials.

  6. Add fuel. Assembly > Add Fuel
    DO NOT use E15 or E85.

  7. DO NOT plug in any electrical devices.CHAMPION POWER EQUIPMENT 201184 Wireless Remote Start Inverter Generator - Set Up7 NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!
    8a. Wireless Start
    1. Push the battery switch to the “ON” position.
    2. Turn the EZ Start dial to the full “ON” position.
    3. Press and release the “START” button on the remote key fob.

  8. 8b. Electric Start
    1. Push the battery switch to the “ON” position.
    2. Turn the EZ Start dial to the full “ON” position.
    3. Push the choke button.
    4. Press and hold ignition switch on EZ Start Dial.
    5. Push the choke button. 8c. Manual Start
    1. Push the battery switch to the “ON” position.
    2. Turn the EZ Start dial to the full “ON” position.
    3. Push the choke button.
    4. Pull the recoil to start the engine.
    5. Push the choke button.

  9. Plug in. Operation > Connecting Electrical Loads.CHAMPION POWER EQUIPMENT 201184 Wireless Remote Start Inverter Generator - Set Up10
    Visit our YouTube channel to watch our how-to videos and subscribe to view our latest videos on our Champion Power Equipment products!

NEED ASSISTANCE OR HAVE A QUESTION?

GIVE US A CALL.
1•877•338•0999
CHAMPIONPOWEREQUIPMENT.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

CHAMPION POWER EQUIPMENT User Manuals

Related Manuals