MASON 002654 150 Watt High Bay LED Light User Guide
- June 15, 2024
- MASON
Table of Contents
- MASON 002654 150 Watt High Bay LED Light
- Product Information
- Specification
- Features
- Optical and Electrical Parameters
- Profile Drawings
- Packaging Information
- Packaging Diagram
- Connection Instruction
- Parts & Tools
- Installation Steps & Cautions
- Troubleshooting
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MASON 002654 150 Watt High Bay LED Light
Product Information
Specifications
- Stock Code: 002654
- CE and RoHS-compliant
- COB (Chip-on-Board) technology
- 756 LED density per meter
- 24V DC input voltage
- IP65 waterproof rating
- 3-year warranty
Features
- High-density COB LEDs
- Flexible LED strip
- Full lighting: 12W/m, R:1022mil G:1022mil B:6*20mil
- Linear lighting without light spot, soft and uniform luminance
- High temperature resistance and long life
Applications
Suitable for indoor use, such as in KTV, shopping mall, cabinet,etc., as edge decorative lighting or contour lighting.
Optical and Electrical Parameters
P/N| LED Color| CCT (Kelvin)| Luminous Flux (lm/m)| Efficacy (lm/w)| Working
Voltage (VDC)| Working Current (mA)
---|---|---|---|---|---|---
RM1316SP-HHA Red| 620-630| —| 115 (1m), 140 (5m)| 35| 24| 165 (1m), 660 (5m)
RM1316SP-HHA Green| 520-525| —| 115 (1m), 380 (5m)| 95| 24| 165 (1m), 660 (5m)
RM1316SP-HHA Blue| 455-460| —| 115 (1m), 64 (5m)| 16| 24| 165 (1m), 660 (5m)
Packaging Information
- Total quantity: 5 reels
- Outer carton size: 458mm x 256mm x 268mm (18.03in x 10.08in x 10.55in)
- Total weight: 10.08kg (22.23lb)
Installation Steps & Cautions
- Make sure the surface is clean before installation.
- Calculate the needed length and cut off any extra length along the cutting mark if necessary.
- If you need to add wires, please weld them at the next location with a printed mark.
- While sticking strips, peel off the release paper of the tape step by step. Avoid peeling off all release paper at once to avoid a mess.
- Stick Mylar tape to isolate the cutting position from the bottom of the profile inner slot to avoid short-circuiting.
- Do not bend the strip into a right angle or twist it to stick on the mounting surface.
FAQ
Q: What is the warranty period for this product?
A: The product has a warranty of 3 years or 13,000 hours,whichever comes
first. The lifetime of the product is 36,000 hours. Q: What are the
applications of this product? A: This product is suitable for indoor
use, such as in KTV,shopping malls, and cabinets, for edge decorative lighting
or contour lighting. Q: What is the IP rating of this product?
A: The product has an IP65 waterproof rating.
Specification
Prepared | Checked | Approved |
---|---|---|
Accepted | Confirmed | Approved |
--- | --- | --- |
Model: RM1316SP-HHA
500013mm,3780pcs NCSP silicone tube series RGB 24V flexible led strip ( Full lighting: 12W/m, R:1022mil、G:1022mil、B:620mil)
Picture
Features
- High-density COB LEDs;
- Linear lighting, without light spot, soft and uniform luminance ;
- High temperature resistance, long life;
- Luminous surface width of 13.0±0.2mm;
- CE , RoHS compliant Applications:
- Suitable for indoor use, such as in KTV, shopping mall, cabinet, etc. as edge decorative lighting or contour lighting.
Warranty:
- 3 years or 13,000 hours, whichever comes first
- Lifetime 36,000 hours.
Optical and Electrical Parameters
Others:
Notes:
- Testing environment temperature: 25±2℃ [77±3.6℉];
- The above data each single product could differ from the typical values. The data subject to change without prior notice;
- The above CCT is derived from bare LED. Due to the refraction of the half pack filling tube, there may be slight changes. Please refer to the actual sample for the final CCT.
- The above “–” means the parameters are not required temporarily.
Profile Drawings
Packaging Information
Notes: Above qty and weight of packing is only for the packing shown in the picture, which might be different from other packing modes, thus for actual qty and weight please refer to actual samples.
Packaging Diagram
Connection Instruction
Notes : please make sure the”+”and”-“of the product’s input are correctly connected to those of the power supply output.
Parts & Tools
Product Spare Parts
Self-provided Tools
Installation Steps & Cautions
-
Make sure the mounting surface is clean before installation;
-
Calculate the needed length and cut off the extra length along cutting mark if necessary; if need to add wires, please weld them at the next location with printed mark.
-
While sticking strips, peel off the release paper of the tape step by step.
Don’t peel off all release paper at a time to avoid getting your strip in a mess.
Notes: No pressing the bead! -
Stick Mylar tape to isolate the cutting position from the bottom of profile inner slot to avoid short-circuit;
-
The installation at the corner is shown as the above figure.
Notes: No bending it into right angle; No twisting it to stick on the mounting surface. -
Connect strip wires to the output terminal of power supply, and dispose with waterproof, insulation, short-circuit and anti-corrosion protection at both the wire joints and the cut section of your strip (if any)
-
No bending the strip at the position of LED
-
No twisting the strip
-
No winding an object with a diameter <5cm
Troubleshooting
Malfunctions | Possible Causes | Solutions |
---|
All LEDs don’t work
| 1. The power supply did not connect to power
grid.
| Power on
2. No electricity due to short-circuit of external
power supply.
| Remove the malfunction caused by short-circuit,
power on again.
3. The wires of strips connect to power supply
output reversely.
| Check the connecting and ensure the wires are
connected correctly.
Part of LEDs don’t work| 1. Part of power supplies do not have output.|
Check the power supply system.
2. Part of wires of strips have malfunction.
3. Particular modules connected reversely.| Correct connection
Brightness of LEDs is weak or uneven| 1. Overloaded power supply;| Replace it
with higher power supply
2. The power loss of power circuit is huge or the power loss of each circuit
existing big difference.| Ensure working voltage of strips is within±5%V of
rated voltage.
(1. Shorten the length of wires between the first strip and power supply or replaced with wires with bigger diameter; 2. Ensure the cascading qty of string is less than or equal to the allowed maximum cascading qty, and each strip
cascading qty is well-balanced.)
3. Exceed in qty of strips in series| Lessen the cascading qty for strip and ensure the
qty for each electrical circuit is within the maximum cascading qty.
LEDs are blinking
| 1. Poor contacted in the joints.| Find out and tackle malfunction
immediately.
2. Failures in power supply.| Replace power supply.
Declaration
- If the external flexible cable of light box is damaged, please replace it by its manufacturer or its service agent or qualified person to avoid a hazard.
- The specific installation and cautions please refer to the user manual.
- The given data in this specification is based on our standard product. There may be existed slight difference compared with actual products.
- All Illustrations in this specification are for reference only.
- This product is subject to change or modify without prior notice.
- RISHANG OPTOELECTRONICS CO., LTD. reserves the right of final explanation for this specification.
Rishang Optoelectronics Co., Ltd. (stock code: 002654)
Add: North 701, Wanrun Building, No. 2519, Guangqiao Avenue, Fenghuang
Street,Guangming New District, Shenzhen Guang Dong, 518108, China
Tel: +86-755-33258896 E-mail:
info@ledlamps.com.cn
Website: www.ledlamps.com.cn
Copyright RISHANG OPTOELECTRONICS CO., LTD. All Rights Reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>