JACK MASON PURSUIT Aviation Chronograph 42mm User Manual

JACK MASON PURSUIT Aviation Chronograph 42mm User Manual

Miyota Caliber No. 0S10 Chronograph Function

Setting The Time

1. Pull the crown out to the 2nd position.
2. Turn the crown to set Hour and Minute Hands.
3. When the crown is pushed back to the Normal position, Small Second Hand begins to run.

Setting The Date

1. Pull the crown out to 1st position.
2. Turn the crown counter-clockwise to set the date.
   • Set the date between the hours of 2:00 am to 8:00 pm to ensure the date changes to the following day.
3. After the date has been set, push the crown back to Normal position.

Using The Chronograph Function

This chronograph will measure and display time in 1/1 second units up to a maximum of 11 hours 59 minutes 59 seconds. The chronograph second hand keeps continuously for 11 hours 59 minutes 59 seconds after starting.

Measuring time with a Chronograph:

1. The chronograph can be started and stopped each time Button A is pressed.
2. Pressing Button B resets the chronograph  and the Chronograph Second Hand and Chronograph Minute Hand , and Chronograph Hour Hand return to zero position.

Chronograph Reset

This Procedure should be performed when the Chronograph Second Hand does not return to zero position after the chronograph has been reset, and including after the battery has been replaced.

1. Pull the crown to the 2nd Position.
2. Press Button A to set the Chronograph Second Hand to the zero position. The chronograph hand can be advanced rapidly by continuously pressing Button A.

• * Do not push crown to **Normal Positio** n while the **Chronograph Second Hand** returns to zero position. It stops on the way when crown are returned to **Normal Position** and its position is recognized as zero position

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>