ShengYu T16 Bluetooth Headset User Manual

User’s manual
V5.3
Headphone wireless headphones

Introduction:

Thank you for purchasing and using our Bluetooth headset.
This manual helps you understand how to use this Bluetooth headset, please read it carefully.
Before using a Bluetooth headset, you should understand the Bluetooth capabilities of your mobile phone or other devices.
Wearing the product in both left and right ears Middle earplugs are suitable for 90% of the population, it is recommended to try them on.

Product schematic:

Start using:

Press and hold the multi-function button on the surface of the Bluetooth headset for up to 8 seconds
(see the product schematic for details)
Until the indicator shows blue, red, blue, and red lights fashing alternately
Note: [The blue light cannot be searched for models] Need to press and hold for 8 seconds in the shutdown state Don’t let go until the indicator light flashes blue. red, blue and red alternately
Search and match with your phone

How to pair:

Turm on the phane’s Bluetooth, search for “T16” and click the link

Charge the headset:

The headset will give a voice reminder when the battery is low Use the charging cable to connect to the USB interface to charge the headset
In the charging state, the red light is always on, and the full blue light is off when it is fully charged.

Function and operation:

Switching operation steps

1. Power on: In power off statelong press the multi-function button for 6 seconds (blue and red lights flash alternately)
2. Power off: In the power on state, long press the multi -function button for 6 seconds (red light flashes three times)

Function operation method:

answer the phone
Click the multi-function button 1 time to answer an incoming call
End call
Click the multi-function button 1 to end the call during a call
Refuse to call
Short press the multi-function button for 2 seconds to reject a call
Chinese and English switch CH/EN in the power-an state, double-click the muit- function bulton to switch between Chinese and English voices(operate when the phone is not connected, and the connacted phone needs o disconnect Bluetoath to switch)
Play music
Press the multi-function button 1 time in standby mode to play music
Pause music
Press the multi-function button 1 time during music playback to pause playback
Cut song
In the music state, press the multi-function button twice to switch to the next song
In the music state, press the multi-function button 3 times to switch to the previous song
Summon Apple Siri/Android Voice Assistant
Sin standby mode, short press the multi-function button for 2 seconds to wake up Apple Siri/Androld voice assistant

Binaural explanation
After turning on, three clicks switch to binaural mode Power on: Press and hold the power on button for 3 seconds
Shutdown: Press and hold the power button for 5 seconds
Volume increase: Press the right ear three times continuously
Volume decrease: Press the left ear three times continuously
Next song: Press the right ear twice in a row
Previous song: Press the left ear twice in a row
Play/Pause: Press the power button once
Answer/end: Press the power button once
Reject incoming call: Press and hold the power button for 2 seconds during the call Siri/Voice Assistant: Press and hold the power button for 2 seconds
Switching voice: phone not connected when turned on Double click on the power button (switch between Chinese and English)

Safety guidelines:

1. Do not disassemble or modify the equipment for any reason, as this may cause the headphones to malfunction or burn out.
2. Do not allow the device to come into contact with liquids, as this may cause damage to the device.
3. Do not place the device in an environment where the temperature is too low or too high (below 0 °C or above 45 °C).
4. Do not use the equipment in thunderstorm weather, as thunderstorms can cause abnormal operation of the equipment, signal interruption, and other phenomena.
5. Do not use a mobile power source for charging, as this may cause the headphones to malfunction or burn out.
   (The above 6 damage items are not covered by the warranty, please be informed).

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>