nVent A1008NFAL Clamp Cover Lightweight Enclosure Instruction Manual
- June 12, 2024
- nVent
Table of Contents
nVent A1008NFAL Clamp Cover Lightweight Enclosure
Product Information
- Product Name: Small Grounding Kit
- Model Number: 87927766
- Included Components: Panel Screws, 10-32 Hex Nut, Keps Nut,
- Grounding Label, 10-32×5/16 Screw, Lockwasher Panel Screw
Product Usage Instructions
- Insert the 10-32×5/16 screw through the hole in the panel as shown.
- Secure screw with keeps nut. The keeps nut must penetrate into the paint to ensure electrical continuity.
- Attach the ground wire (not included) and secure with 10-32 hex nut as shown.
- Install the lockwasher under one of the screws securing the panel to ensure grounding between the panel and the enclosure. 5. Attach the included grounding label adjacent to the bolt as
shown.
Model Number: 87927816
Installation Instructions
For Small Grounding Kit 87927766
PANEL SCREWS ENCLOSED
- Insert the 10-32×5/16 screw through the hole in the panel as shown.
- Secure screw with keps nut. The keps nuts must penetrate into the paint to insure electrical continuity.
- Attach the ground wire and secure with 10-32 hex nut as shown.
- Install the lockwasher under one of the screws securing the panel to insure grounding between the panel and the enclosure.
- Attach included grounding label adjacent to the bolt as shown.
Rev. B ©2018HoffmanEnclosuresInc. PH7634222211• nVent.com/HOFFMAN P/N 87927815 87927816
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>