NEXGO G201 Integrated PINPAD Instruction Manual

NEXGO G201 Integrated PINPAD

Product Information

Specifications:

• Model: F
• Version: E
• Serial Number: XXXX
• G201-FCC Certified
• Weight: 105g
• Dimensions: 125mm x 78mm
• Relative Humidity: 5% to 95% (Non-Condensing)
• Manufactured by: SHENZHEN XINGUODU TECHNOLOGY CO., LTD
• Inspection Certificate: Inspector – Unknown, Place of Origin – Shenzhen, Guangdong, Date – 2023.11.24

Product Usage Instructions

Card Swipe:

1. Ensure the device is powered on.
2. Hold the card with the magnetic strip facing toward the tracking device inside.
3. Swipe the card steadily and continuously.
4. Note: The transaction may fail if the magnetic card’s strip is damaged or the swipe direction is incorrect.

NFC Card Usage:

1. Bring the card close to the NFC area on the device.
2. Keep the card in place for one second.
3. Remove the card when you hear a Di voice and see the corresponding picture.

IC Card Usage:

1. Locate the IC card slot at the bottom of the keypad.
2. Insert the IC card with the chip side facing up.
3. Push the IC card all the way into the slot.
4. Note: The transaction may fail if the IC card chip contact point is damaged or oxidized.

Installation and Connection:

• Follow the provided instructions strictly when installing and connecting the terminal.
• Avoid damaging the power line and power adaptor. If damaged, they cannot be used anymore.
• Check if the power supply socket complies with the terminal’s set voltage before inserting the AC socket.
• It is recommended to use a fuse socket and ensure proper grounding.

General Usage Precautions:

• Avoid exposing the terminal to liquids or any electric conduction material to prevent short circuits or damage.
• Do not insert any foreign materials into the ports as it may cause serious damage to the terminal.
• If there is a fault with the terminal, contact a professional POS maintainer for repairs. Non-qualified individuals should not attempt to repair the terminal.
• When installing the paper roll, be cautious of the cutter knife to avoid injury.
• Use only standard print paper to prevent paper jams or damage to the printer.
• Avoid shaking or knocking the terminal to maintain its proper functioning.
• Do not use or place flammable sprays, paints, or any other flammable substances near the terminal to prevent fire hazards.
• Prohibited actions include disassembling or remaking the terminal, as well as using it for illegal purposes. Offenders will face legal responsibility.

FAQ

• Q: What should I do if the magnetic card swipe fails?
  A: Ensure that the magnetic card’s strip is not damaged and that you are swiping the card in the correct direction.

• Q: Why does the IC card transaction fail sometimes?
  A: The IC card chip contact point may be damaged or oxidized, resulting in transaction failures.

• Q: Can I repair the terminal myself if it encounters a fault?
  A: No, please contact a professional POS maintainer for repairs. Non-qualified individuals should not attempt to repair the terminal.

• Q: What type of paper should I use for the printer?
  A: Please use standard print paper to avoid paper jams or damage to the printer.

Structure Description

Instructions

• Power on [off
  Run automatically after power on.

• Magnetic card
  Please put the card’s magnetic strip towards to track device inside when swiping the card, it can support both directions; Make sure to swipe the card stably and constantly.

Note:
The transaction may fail if the magnetic card’s tripe is damaged or the swipe way is wrong.

IC card
The IC card slot is located at the bottom of the keypad, keep the chip side up when inserting the card, and insert the IC card to the end. The IC card should be inserted in the IC card slot during the transaction process.

Note:
The transaction probably fail if IC card chip contact point is damaged or oxidative.

Contactless card
Please put the card close to the NFC area, and stay for one second, then remove the card when you hear a “Din voice, as in the following picture.

Common Fault Process

If the below solutions can’t solve the problems or have other questions, please contact the maintainer.

Attention To Installation And Operation

• Operating Temperature: 0 to 50°C
• Storage Temperature: -20°C to 70°C
• Relative Humidity: 5% to 95% (Non-Condensing)
• Please follow the instructions strictly when installing and connecting the terminal.
• Do not damage the power line and power adaptor. It can’t be used anymore if the power line or power adaptor is damaged.
• Please check power supply socket whether complying with the terminal set voltage before inserting the AC socket.
• Recommend to choose the fuse socket, and grounding well.
• Please leave the terminal away from liquid, and forbid splash into any liquid or electric conduction material, otherwise, it will cause a short-circuit or damage to the terminal.
• Please do not insert any foreign material into any ports, it will damage the terminal seriously.
• Please contact the professional POS maintainer When the terminal has a fault, users or other non-qualified POS maintainers should not repair the terminal.
• Please do not touch the cutter knife in case of hurt when installing the paper roll.
• Please use the standard print paper in case of paper jam or printer damage.
• Please do not shake or knock the terminal.
• Please do not use or place flammability spray, painting, etc. in case of fire.
• Forbid to disassemble or remake the terminal. Forbidden to use the terminal illegally, offenders will stand legal responsibility.

Notes:

• O. means the content of this hazardous and noxious substance in all the homogeneous material of the component is below the requirement of SJ/T 11363-2006 standard
• X. means the content of this hazardous and noxious substance at least in certain homogeneous materials is higher than the requirements of SJ/T 11363-2006 standard, but the components marked by “X” in the above form are all due to the current industry technology develop level and cannot realize the substitution of the hazardous and noxious substances or elements

Environmental protection indication:
for the products that arrive or exceed the use life, should be recycled according to , and cannot be discarded arbitrarily.

Packing list

Announcement

• Shenzhen Xinguodu Technology Co., Ltd reserves the right to modify this manual without prior notice and continuously improve the accuracy, adequacy, and completeness of the information contained in this manual.
• Shenzhen Xinguodu Technology Co., Ltd does not accept any legal responsibility for the adverse consequences caused by-using this product not Per this manual, or using accessories that are not supplied by Shenzhen Xinguodu Technology Co., Ltd.
• This manual is copyrighted by @Shenzhen Xinguodu Technology Co., Ltd.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, If not Installed and used under the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 16 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>