NEXGO N502-W Wireless Base POS Terminal Installation Guide
- June 9, 2024
- NEXGO
Table of Contents
NEXGO N502-W Wireless Base POS Terminal
The unit is connected to N5 that supports product sales.
Place the N5 POS terminal on the Base. Then the N5 will identify the Base
automatically and switch from its own power source to charge through the Base.
When the Base’s Ethernet connection is available, the N5 can connect to the
Internet through the Base.
Warning
- When using the base, do not vibrate, shake or drop.
- Do not insert unknown material into any port on the N5; this may cause serious damage.
- Keep the base away from liquid.
- Avoid exposing the device to an excessively hot, humid, dusty, or strong electromagnetic environment.
- If the base is defective, please contact Nexgo Technical Support for assistance.
Product Appearance Instructions
Port Instructions
- 1 x Micro USB Power only
- 1 x Ethernet RJ45-8P8C
Working Environment:
- Operating temperature： 0°C~50°C (32°F ~122°F)
- Relative Humidity: 10%~93% (Non-condensing)
Storage Environment:
- Storage Temperature: -20°C~70°C (-4°F ~158°F)
- Storage Environment: 5%~95% (Non-condensing)
Packing List
| No. | Item | Quantity |
|---|---|---|
| 1 | N502-W | 1 |
| 2 | Quick Installation Guide | 1 |
FCC Warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference , and (2) this device must accept any interference received , including interference that may cause undesired operation . Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver .
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
List of Toxic and Hazardous Substances or Elements
Parts
| Toxic and harmful substances or elements
---|---
Lead (Pb)
|
Mercury (Hg)
|
Cadmium (Cd)
|
Hexavalent Chromium (CrVI)
|
Polybrominated Biphenyls
(PBB)
|
Polybrominated Diphenyl Ethers (PBDE)
Circuit board components
| | | | | |
Description:
1 “O” means that the content of the toxic and hazardous substance in all
homogeneous materials of the part is below the limit requirement of the
SJ/T11363-2006 standard;
2 “X” means that the content of the toxic and hazardous substance in at least
one of the homogeneous materials of the part exceeds the limit requirement of
the SJ/T11363-2006 standard; but the parts marked as “X” in the above table
are all due to current industry technology The level of development is limited
and the substitution of toxic and hazardous substances or elements cannot be
achieved. [Environmental protection reminder] Products that have reached or
exceeded the environmental protection service life should be recycled and
reused in accordance with the “Administrative Measures for the Control of
Electronic Information Products” and should not be discarded at will.
Special statement
Shenzhen Xinguodu Technology Co., Ltd. reserves the right to modify this manual without prior notice, and reserves the right to continuously improve the accuracy, sufficiency and completeness of the information in the manual. Shenzhen Xinguodu Technology Co., Ltd. does not assume any legal responsibility for the adverse consequences caused by the use of this product or the use of accessories not provided by our company in accordance with the requirements of this manual. This manual is copyright©Shenzhen Xinguodu Technology Co., Ltd.
INSPECTION CERTIFICATE
- INSPECTOR:
- PLACE OF ORIGIN: Shenzhen,Guangdong
- SHENZHEN XINGUODU TECHNOLOGY CO.,LTD
SHENZHEN XINGUODU TECHNOLOGY CO.,LTD.
- Company address: 17B Jin Song Mansion, Terra Industrial Trade Park Chegongmiao, Futian District, Shenzhen
- Hotline: 86+755+26067135
- https://www.nexgoglobal.com