Willow Innovations L01 Go Breast Pump Instruction Manual
- June 4, 2024
- Willow Innovations
Table of Contents
Instruction Manual
L01 Go Breast Pump
Plug in the pump until the indicator light turns on
Pump comes partially charged, but needs to wake up from sleeping mode. Plug
the USB charging cable into the pump, then into a charger. Wait until the pump
lights up.
Willow
Go™
Breast Pump | Instructions for Use
ASSEMBLY
Note: Ensure that your hands are clean before assembling the pump.
ALIGNING THE PUMP
Bring a pump to your breast, centering your nipple in the flange tunnel.
IMPORTANT: Correct nipple alignment is key to comfort, output, and
performance
- The nipple must be positioned correctly in flange tunnel before pumping to avoid discomfort
- If you still experience discomfort with proper placement, you may need a different flange size
PUMPING
Hold the power button for one second to start and stop pumping. The LED
indicator will display green, orange or red for battery status, then turn off
after 5 seconds for
discreet pumping. Pump starts in stimulation mode and automatically switches
to expression mode after 2 minutes. Press the mode button at any time to
change manually.
Note: The pump will not work when connected to a charger. Always
disconnect the pump from the charger before using it. LED light will be off
during pumping unless notification is triggered.
Color of light indicates battery status:
| When power | While |
|---|---|
| button is pressed | charging |
| Green Solid | Green Pulsing |
The indicator light will turn off once the battery is fully charged.
| |
Orange Solid| Orange Pulsing| Enough for 1 session
| |
Red Solid| Red Pulsing| Low battery – inadequately charged for the session
Stimulation Mode| Expression Mode
Number of Levels| 6| 9
Starting Level| 1| Level used in
IMPORTANT: Avoid setting suction at a level that causes discomfort. If you feel excessive discomfort or pain, stop pumping, remove the pump and realign or discontinue the session.
TRANSFERRING MILK
Pour milk out before removing the container.
Pour into a bottle or bag with the container side facing down
IMPORTANT:
- Do not microwave breast milk.
- Do not use hot water to thaw breast milk.
- Do not refreeze thawed breast milk.
- Refer to La Leche League’s tips on safely storing breast milk:
www.llli.org/breastfeedinginfo/storingmilk
Empty any remaining milk from the tunnel
CLEANING
Safety
- Wash hands with soap and water before handling.
- Use a wash basin dedicated only to cleaning pump parts and infant feeding items.
WARNINGS
Pump
-
Do not sanitize the pump using a microwave or steam. Never immerse the pump in water.
-
Do not store pump parts in the refrigerator or freezer.
Parts -
Do not sanitize flange or container parts using microwave or steam.
-
Do not use harsh chemicals to clean parts.
-
Do not store damp parts.
Note: For additional cleaning, guidelines see the Center for Disease
Control website:
www.cdc.gov/healthywater/hygiene/healthychildcare/infantfeeding/breastpump.html
Washable parts
Before first use, boil for 5 minutes
The pump is NOT washable Wipe with a damp cloth as needed
IMPORTANT: Replace washable parts after signs of wear and tear.
help.onewillow.com |
1-888-WILLOW-3
Documents / Resources
|
Willow Innovations L01 Go Breast
Pump
[pdf] Instruction Manual
L01, 2AHRJ-L01, 2AHRJL01, L01 Go Breast Pump, Go Breast Pump
---|---
References
- Willow Help
- cdc.gov/healthywater/hygiene/healthychildcare/infantfeeding/breastpump.html
- Storing Human Milk - La Leche League International