BRAINWAVZ QC45 Earpads for Bose Installation Guide

BRAINWAVZ QC45 Earpads for Bose

Product Information

Specifications:

• Compatibility: Bose QC45 headphones
• Material: High-quality foam and synthetic leather
• Color: Black

Product Usage Instructions

Remove Old Pads:

1. Grip the earpad firmly between your thumb and fingers.
2. Pull the earpads in a forward and downward motion towards the bottom. You may hear multiple clicks as the pad releases from the internal tab system.
3. Remove the Scrim A from the earcup B. This is held on with a small amount of tape and will come free easily. Clean away any old= glue residue C.
   NOTE: Hold the headphones steady during the removal procedure.

Install Replacement Scrim (Dust Protection):
NOTE: Select the correct Scrim for each side of the headphones.

1. Peel the adhesive backing paper A from the 2 small pieces of tape.
2. Place the Scrim into the centre of the earcup. Lightly apply pressure on the two tape sections B.

Install Replacement Earpad:
NOTE: There is a rigid retaining ring on the rear of the earpad. This is used to secure the pads into the tabs on the earcup.

1. Place the earpad onto the earcup, there is no particular orientation.
2. Push the edges of the earpad retaining ring firmly into each one of the tabs.
   NOTE: Ensure all tabs are correctly inserted, some may take a little more force than others.

Frequently Asked Questions (FAQ)

• Can I use these earpads on other Bose headphone models?
  No, these earpads are specifically designed for use with Bose QC45 headphones and may not fit other models.

• Are the replacement earpads comfortable?
  Yes, the replacement earpads are made of high-quality foam and synthetic leather, providing comfort during extended use.

• Can I reuse the old adhesive backing tape?
  It is recommended to use the new adhesive backing tape provided with the replacement earpads for optimal attachment.

• How often should I replace the earpads?
  The lifespan of earpads can vary depending on usage and care. It is recommended to replace them when they show signs of wear or discomfort.

Remove Old Pads

Install Replacement Scrim (Dust Protection)

NOTE:
Select the correct Scrim for each side of the headphones.

1. Peel the adhesive backing paper A from the 2 small pieces of tape.

2. Place the Scrim into the centre of the earcup. Lightly apply pressure on the two tape sections B .

Install Replacement Earpad

NOTE: There is a rigid retaining ring on the rear of the earpad. This is used to secure the pads into the tabs on the earcup.

1. Place the earpad onto the earcup, there is no particular orientation.

2. Push the edges of the earpad retaining ring firmly into each one of the tabs.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>