BRAINWAVZ Arctis Nova Pro Wireless Earpad Adapter Ring Installation Guide

June 11, 2024
BRAINWAVZ

BRAINWAVZ - logo Arctis Nova Pro Wireless Earpad Adapter Ring
Installation Guide

Remove Stock Pads

  1. Wrap your fingers firmly around the pad, try go under the pad to get a stronger gripBRAINWAVZ Arctis Nova Pro Wireless Earpad Adapter Ring
  2. Pull the earpads in a forward and sideways motion You may hear multiple “clicks” as the pad releases from the internal tab system.
    NOTE
    Hold the headphones steady during the removal procedure.

NOTE
The stock pad and plastic mounting ring are one piece Get To Know The Adapter Ring
FRONT
There are 6 mounting holes A on the inner edge of the adapter, these match the clips on the head unit. BACK
There are also two key guides B to help position the adapter correctly when installing.

Install The Adapter

NOTE: To make installation easier we recommend rotating the headset, so the TOP is facing towards you.

  1. Place the TOP A of the adapter into its corresponding clip first, making sure the the key guides are lined up with the guides on the head unit B .BRAINWAVZ Arctis Nova Pro Wireless Earpad Adapter Ring - Adapter
  2. With the adapter in its initial starting position push firmly on position C first, then a final push on position D You will here several clicks as the adapter fits into place.
  3. Once the adapter is fitted you can now install the earpad of your choice from our Oval, Angled, ProStock and SteelSeries collections.BRAINWAVZ - logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals