BRAINWAVZ WH-1000XM4 M3 Replacement Earpads User Manual
- June 15, 2024
- BRAINWAVZ
Table of Contents
BRAINWAVZ WH-1000XM4 M3 Replacement Earpads
Remove Old Pads
NOTE
Pads are secured via 6 click-in tabs
- Gently insert a flat, blunt tool between the earpad and headphone body A
- Carefully twist your tool back and forth until the pad starts to break loose, repeat around the pad until it comes free.
- (Use a blunt knife, metal ruler or credit card as a removal tool)
- At this point you may like to remove the foam inserts B and clean them before installing your new pads. (Replacement foam NOT included)
Insert Foam Pad
- Remember to re-insert the foam before installing the new pads.
Get To Know The Earpads
- There is a specific pad for left and right, pads also must be in the right orientation, as shown above.
Install Replacement Earpad
- Place the earpad onto the earcupensure correct orientation.
- Push down on the earpad firmly in all 6 locations – a small click may be heard when in place.
- Ensure all tabs are correctly inserted, some may take a little more force than others.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>