Welov P200PRO True Hepa Air Purifier User Manual

Welov P200PRO True Hepa Air Purifier

IMPORTANT SAFETY INSTRUCTIONS

• Moving
  Turn off and unplug the air purifier before moving it. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

• Installation
  Keep a distance of at least 38cm/15 inches between the air inlets and walls or other objects.

• Essential Oils
  Do not add Essential oils to the air purifier or filter. The filter will become damaged by the oil and will eventually release an unpleasant smell. Do not use diffusers near the air purifier.

Where in Use

• Do not put your fingers or other objects into the air inlet, air outlet, or Alter compartment.
• Keep hair or cloth away from the air purifier to avoid them getting into and Blocking the inlet/outlet.
• Please do not sit on, lean on, or tilt the air purifier.
• Always place the air purifier out of the reach of patients, children, or pets.
• Please keep your air purifier away from any heat sources, such as a stove, oven, electric heater, etc.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not place the air purifier on any uneven surfaces where it can easily fall over.
• To Reduce The Risk Of Fire Or Electric Shock, Do not Use This Fan With Any Solid-State Speed Control Device.”
• Do not use the air purifier in Bathrooms or other places that are hot or over.
• Do not use your air purifier Outdoors. It’s for household use only.

Welov will accept no liability or responsibility for fires or electrical shocks caused by improper operation or not adhering to the above safety instructions.

WHAT’S INCLUDED

KNOW YOUR AIR PURIFIER

PRODUCT OVERVIEW

Description

CONTROL PANEL

• On/Off Button
  Turn the air purifier on/off.

• Sleep Mode Button
  Turns Sleep Mode on/off.

• Night Light Button
  Turn the Night Light on/off and adjust the brightness.

• Auto Mode Button
  Automatically adjust wind speed to purify air according to air quality.

• Timer Button
  Set the time duration to automatically power off the air purifier.

• Filter Replacement
  Light up when the air filter should be checked.

• Child Lock Button
  Prevent the current settings from being changed accidentally by children or pets.

• Fan Speed Buttons
  3 fan speed button options:

  • Low (Fan Speed Button 1 indicates will light up),
  • Medium (Fan Speed Button 2 indicate),
  • High (Fan Speed Button 3 indicate).

• WiFi Indicator
  Turns on, off, or blinks to indicate pairing status. See the Aidot in-app instructions for more information.

FILTRATION SYSTEM

The air purifier’s filtration system consists of the Pre-filters and the HEPA&Activated Carbon Filter.

1. Pre-filters
   The pre-filters can filter large particles such as dust, lint, fibers, hair, and pet hair.

2. True HEPA filter HEPA
   Filter out particles 0.1 Microns in diameter from at least 99.7% of the air. The HEPA can filter small particles such as smoke, dust, mold spores, bacteria, viruses, and allergens such as pollen, pet dander, and dust mites.

3. Activated Carbon Filter
   This layer is to deal with odors or smoke. This layer can also filter organic compounds such as Formaldehyde, Ammonia, Hydrogen Sulfide, and volatile organic compounds (VOCs).

   • Temperature Conditions for Using the Filter
     Excessive moisture may damage the filter. The air purifier should be used in an area with a humidity level below 85% RH. If you use the air purifier in excessively humid areas, the surface of the filter part will become moldy.

SPECIFICATIONS

GET STARTED

• Step 1:
  Flip over the air purifier and open the filter cover.

• Step 2:
  Remove the protective plastic bag from the activated carbon Filter, and reinstall the filter into the housing.

• Step 3:
  Close the filter cover, and turn over the air purifier to get it ready for use.

• Step 4:
  Place the air purifier in a ventilated area and on a level Floor. Keep the air inlet facing upwards and maintain a distance of at least 38 cm/15 inches away from the wall or other objects.

• Step 5:
  Plug the power cord of the air purifier into the working socket.

Aidot App Setup

1. To download the Aidot app, scan the QR code or search “Aidot” in the Apple App Store or Google Play Store.
2. Open the Aidot opp. Log In or Sign Up
3. Follow the in-app instructions to set up your smart air purifier

Tips:

• To disconnect the Wi-Fi, press and hold the On/Off button for 5 seconds until the WI-Fl indicator turns off. This will restore the smart air purifier’s default settings and disconnect it from the Aidot opp
• To reconnect, please follow the instructions in the Aidot opp for adding a device.

USE YOUR AIR PURIFIER

ON/OFF

1. After connecting the air purifier to power, press **** to turn it on, and it will start purifying the air with the default fan speed.
2. Press ****again to turn off the air purifier.

Sleep Mode
Sleep Mode operates quietly by using a fan speed lower than low speed.

1. Tap ****to turn Sleep Mode on/off.
2. Sleep Mode will turn off the display after 3 seconds if no other buttons are tapped.

Tips:

1. ln sleep mode, timer adjustment are available. The corresponding indicator will light up for 1s when setting and then turn off.
2. When the display is turned off, tap any button (except ****) to turn the display back on. If you don’t tap another button, the display will turn off again after 3 seconds.

Night Light
This function is to provide illumination for your convenience at night.

1. Tap **** to turn the Night Light on/off.

2. Tap and hold for 1.5 to gradually increase the brightness; release when you get your desired brightness.  Tap and hold it for 1.5 again to decrease the brightness.

Tips:
The air purifier will remember the brightness of the night light if it’s plugged in. The brightness will return to the default level if the air purifier is unplugged and turned on again.

Auto Mode
Auto Mode adjusts the fan speed automatically based on air quality. For example, if the air quality is bad, the fan will be set to high speed.

1. The air purifier will take 10 seconds to detect the air quality each time it is turned on. During this time, the air quality indicator light will be green. After 10 seconds, the air quality indicator lights will change color based on the detected air quality.
2. Tap (A) again to turn off the Auto Mode.

Tip:
In this mode, Tap the other speeds button will exit the Auto mode.

PM2.5 Display

1. The PM2.5 value on the display shows the amount of airborne particles (µg) that are detected per 1 cubic meter (m3) of air volume. PM2.5 refers to particulate matter (PM) that is less than or equal to 2.5 microns (µm) in diameter. These particles, also known as “Ane particles”, are so small that they can only be detected with an electron microscope, and they stay in the air longer than heavier particles such as dust and mold.
2. Your air purifier’s Infrared Dust Sensor detects the amount of PM2.5 particles that are in a given space (µg/m3). Generally, the lower the number, the better your air quality. A number above 150 indicates that there is an unhealthy amount of Ane particles in the air.

Timer

1. You can set a timer for 1-12 hours. Tap @the display will switch from showing the PM2.5 reading to the time you’ve selected.

Tips:

1. Tap and hold ****for 1.5 seconds to cycle through timer options automatically in 1-hour increments.

2. Tap **repeatedly to select a time in 1-hour increments. If you don’t touch any buttons for 3 seconds, the display will switch to showing the PM2.5 reading and the timer will start automatically.
   Tips:** The timer indicators are not the buttons to change the timer duration. The air purifier will automatically power off once the timer ends.

3. The timer will count down from your selected time. When the timer is finished, the air purifier will turn off.
   Tips: While a timer is active, tapping will show the remaining time, rounded up to the nearest hour. Tap again within 3 seconds to add more time in 1-hour increments.

4. To cancel a timer, tap **repeatedly until the display reads “00”. Tips:**

   • You can change the fan speed at any time while the timer is on.
   • The timer will restart if the time is changed.

Fan Speed

• In speed options, we made a more humane split design, There are three-speed options for this air purifier, which include Speed1 (low), Speed2 (medium), and Speed3 (high).
• Tap the air purifier to speed 1 work, Indicator light on.
• Tap( ) the air purifier will be speed 2 work, and ( ) Indicator light on.
• Tap the air purifier will be speed 3 work, Indicator light on.

Tips:

• The fan speed indicators are not the buttons to adjust the speed.
• The fan speed option ****is the highest level that can purify the air quickly, but it will make louder sounds.
• To effectively purify the air, please close your windows and doors while the air purifier is working. But do ventilate if you are using some combustion equipment, e.g., a fireplace or barbecue oven; this is to keep you safe from carbon monoxide.

Child Lock
When the air purifier is on, you can lock the display to prevent settings from being accidentally changed. Buttons will not respond to being tapped.

• Tap and hold for 3 seconds to lock the display. The indica­tor will light up in the center of the display.
• The ****indicator will blink when any other button is tapped to indicate that the Display Lock is on.
• Tap and hold again for 3 seconds to unlock the display. The indicator will turn off.

Tips:
Display Lock can still be used when the air purifier is in Standby Mode.

Filter Replacement

1. When the filter is at the end of its service life, the indicator has been flashing to remind you to replace the filter with a new one.
2. Reset the service time of the new filter after replacement. Please log press **** for 3 seconds until the indicator is normally on.

Displays Error
When the machine is in operation, opening the screen cover will give an alarm, the button is invalid, the indicator light flashes, and the display screen is in an “E1” state. After closing, it will return to normal.

MAINTENANCE AND CARE

CLEAN THE AIR PURIFIER

• Step 1:
  Unplug the air purifier before cleaning.

• Step 2:
  Wipe clean the air purifier’s housing with a soft, dry cloth or brush. If necessary, wipe clean the housing with a damp cloth and dry it immediately.

• Step 3:
  Turn over the air purifier, open the filter cover, then take out the HEPA&Activated Carbon Filter.

• Step 4:
  Vacuum inside the filter compartment.

• Steps 5:
  Vacuum the pre-filters, or wipe them with a damp cloth and make them dry completely.

• Step 6:
  Reinstall the HEPA-Activated Carbon Filter into the air purifier, then close the cover.

Notes:

• If the pre-filters are not cleaned sufficiently, gently wash them under the water with a soft brush. DO NOT reinstall them into the air purifier before they dry completely.
• Do not clean any parts with abrasive chemicals or flammable agents.
• Do not wash the HEPA-PActivated carbon Filter, as this may damage it.

REPLACE THE HEPA AND ACTIVATED CARBON FILTER

• Generally, the HEPA-Activated Carbon Filter should be replaced every 3-6 months. If the air purifier is frequently used in an environment with relatively high pollution, you will need to replace the HEPA&Activated Carbon Filter more often.
• The indicator **** will light up in white to remind you to replace the HEPA&Activated Carbon Filter.
• You may need to replace the HEPA&Activated Carbon Filter if you notice:
  • increased noise when the air purifier is turned on;
  • decreased airflow from the air outlet;
  • unpleasant odor from the air outlet;
  • a visibly clogged and black filter.

Tips:

• To maintain the air purifier’s optimal performance, please use the original filter made by Welov. Please contact us to get the purchase link.
• Do not forget to reset the service time of the filter after replacing it.

STORAGE
If the air purifier is not used for an extended period, please cover the air purifier and filters with protective plastic bags, then store them in a dry place.

TROUBLESHOOTING GUIDE

If you need any further assistance, please feel free to contact us. To maintain the air purifier’s optimal performance, please regularly clean the air purifier and remove objects that block the air inlet.

If your problem is not listed, please contact Customer Support.

Aidot APP TROUBLESHOOTING

My air purifier isn’t connecting to the Aidot app.

• During the setup process, you must be on a secure 2.4GHz WiFi network. ConArm that the network is working correctly.
• Make sure the WiFi password you entered is correct.
• There should be no spaces at the beginning or end of the password.
• Test the password by connecting a different electronic device to the router.
• If you’re manually typing in the SSID and password, double-check that both are entered correctly.
• Try moving your air purifier closer to the router. Your phone should be as close as possible to your air purifier.
• Your router may need to be at a higher location, away from obstructions.
• Make sure your air purifier and router are away from appliances (such as microwave ovens, refrigerators, electronic devices, etc.) to avoid signal interference.
• If you’re using a VPN, make sure it’s turned off while setting up your air purifier.
• Disable portal authentication for your WiFi network. If portal authentication is enabled, the air purifier will not be able to access your WiFi network, and the setup will fail.

Tips : Portal authentication means that you need to sign in to your WiFi network through a web page before you can use the Internet.

My air purifier is offline.

• Make sure the air purifier is plugged in and has power, then refresh the Aidot menu by swiping down on the screen.
• Make sure your router is connected to the internet and your phone’s network connection is working.
• Delete the offline air purifier from the Aidot opp. Swipe left (iOS) or tap and hold (Android”), then tap Delete. ReconAgure the air purifier with the Aidot opp.

Tips : Power outages, internet outages, or changing WiFi routers may cause the air purifier to go offline.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

CUSTOMER SUPPORT
support@welovhome.com
www.welovhome.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>