MAXI-COSI MO183 360 Degree Baby Monitor Instruction Manual

: June 15, 2024
: MAXI-COSI

Table of Contents

MO183 360 Degree Baby Monitor
Features Baby Monitor
Parent Display
Smartphone Setup
Parent Display Setup
Wall mounting your baby monitor
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

See Pro
360° Baby Monitor

MO183 360 Degree Baby Monitor

MAXI-COSI MO183 360 Degree Baby Monitor Login or create an account, then tap + to setup your baby monitor.
Keep these instructions for future reference.

Install the App

https://maxicosi.com/qr/MO183/im

Features Baby Monitor

MAXI-COSI MO183 360 Degree Baby Monitor - Features

a Status light
Solid Red: Powering On Blinking Red: Wi-Fi pairing mode
Solid Blue: Normal operation Blinking Blue: Connecting to Wi-Fi
Note: Status light can be disabled in app or via the parent display
b Microphone
Detects sound for notifications and CryAssist translation
c MicroSD card slot
Insert MicroSD card to capture recordings (4GB–128GB)
d Monitor pairing /Factory reset
Insert reset pin (included) and hold for 5 seconds until you hear a chime
e Two-way talk /Parent display pairing
Press to initiate a two-way talk call with the parent display or app
Hold to pair monitor with parent display (if unpaired)
f USB-C Port
DC 5V(±)10% 5V 1A
g Speaker
Plays lullabies, soothing sounds, and enables two-way talk
Includes: 1 baby monitor, 1 parent display with antenna, 1 wall mounting plate, 1 angle adjust wedge, 1 USB cable with attached adapter, 1 USB cable, 1 adapter, 5 cable management clips, 7 screws, 7 anchors, 1 reset pin, and 1 instruction manual.

Parent Display

MAXI-COSI MO183 360 Degree Baby Monitor - Features 1

a Microphone
Soothe baby with two-way talk
b Battery status light
Green: Fully charged, Orange: Charging, Red: Low battery
c Status light
Orange: Normal operation
d Zoom
Press to zoom in 1x, 2x, or 4x
e Menu
Press for on-screen overlay. Hold for advanced settings
f Select & Direction
Select menu items / Control monitor pan & tilt
g Two-way talk
Press to initiate two-way talk with baby monitor
h Back
Press to go back on menu. Hold to stop Lullaby / Soothing sound playback
i Antenna
Open and adjust angle for optimal signal
j Power
Press to enter sleep mode. Hold 5 seconds to turn display on/off
k Speaker
Listen to sounds from the baby monitor
l Kickstand
3 incline modes for optimal viewing angle
m MicroSD card slot
Insert MicroSD card to capture recordings (4GB–128GB)
n Factory reset
Insert reset pin (included) and hold for 5 seconds until you hear a chime
o USB-C Port
DC 5V(±)10% 5V 1A

Smartphone Setup

Download the Connected Family App. Ensure that your smartphone is connected to your home’s Wi-Fi network.
To use the USB cable with attached adapter: Plug adapter into a wall outlet then insert the USB-C end into the back of the baby monitor.
The monitor head will rotate to calibrate. The status LED will turn red, then blue. To enter pairing mode, insert reset pin to monitor pairing button d and hold for 5 seconds until you hear a chime. When the status LED is blinking red, the device is in pairing mode.
In the app, tap , then select See Pro Baby Monitor to begin pairing your device.
Follow step-by-step instructions to complete pairing.
Once successfully paired, the status LED will turn solid blue.
In the Connected Family App, Tap to learn more, including how to wall mount your product. You can also enable CryAssist, share access, configure notifications, adjust the status LED and more.

Wi-Fi Connectivity for Smartphones
Connecting to this baby monitor via your smartphone requires a 2.4 GHz, 5.0 GHz, or dual-band home network. Certain shared networks such as those in hotels may not function. We recommend a connection with network speeds of 2 Mbps or greater at the location the device will be installed. Your internet service provider can verify the quality of your internet connection.

Parent Display Setup

Power on the baby monitor and the parent display, and they will automatically connect. If the connection fails, please follow the steps below to pair. Pairing must be completed at close range. Ensure that the baby monitor and parent display are no more than 500’ (200m) apart during pairing.
Pairing your baby monitor and parent display:

Press the Menu button on the parent display, and select > Baby Monitor.
Select Baby Monitor 1 or Baby Monitor 2 to pair.
Press and hold the baby monitor pairing button until you hear the chime.
Press the button on the parent display screen to start pairing.
(Optional) For Baby Monitor 2, repeat Step 2–Step 4 above.

Unpairing your baby monitor and parent display:

Press Menu button on the parent display, and select > Baby Monitor.
Select Baby Monitor 1 or Baby Monitor 2 to unpair.
Press and hold the button to unpair the devices.
Note: CryAssist requires an internet connection and must be setup in app.

Wall mounting your baby monitor

Tools required for mounting (not included): Phillips head screwdriver, hammer, drill with 3/16” size bit, and pencil. Before wall mounting, ensure optimal placement of the baby monitor by viewing the monitor within the app or on the parent display. The following instructions are for securely mounting to a drywall surface.

Examine the room and determine the optimal placement on the wall. Mark this location with a pencil. IMPORTANT: Ensure that the baby monitor is at least 3 ft (0.9 m) away from the crib.
Place the included wall mount onto the wall at the marked location, ensuring the arrow is pointing upwards. Using a pencil, make a mark through the two screw holes. Put the wall mount to the side for later use.
Using a 3/16” drill bit, drill a hole 1.0” (2.54 cm) deep on the pencil marks. DO NOT drill through the wall mount holes.
Insert drywall anchor into the hole. If necessary, lightly tap with a hammer until the drywall anchor is flush with the wall surface. Note: If mounting to a wall stud, drywall anchors are not required.
Align the holes of the wall mount with the drywall anchors and using a screwdriver, hand tighten a screw into each of the drywall anchors. DO NOT overtighten.
Locate the hole underneath the base of the monitor and place it on the wall mount.
Applying light pressure to the base, twist the monitor counterclockwise until the Maxi-Cosi logo is facing down. DO NOT pull on the monitor head.
a. To remove the monitor from the wall, push up on the base until it releases from the mount. NEVER leave the monitor hanging on the wall mount without clicking in place.
Before proceeding to the next step. Ensure that the viewing angle is to your liking by verifying the app. Rotate and tilt the monitor as needed.
Wall clips: Use the included wall clips to secure the cord at least 3 ft (0.9 m) away from the crib:
a. Repeat steps 3 and 4 to install the wall anchors into the drywall. Ensure that wall anchors are placed 2 ft (0.61m) apart.
b. Place cord into the wall clips, leaving a little slack.
c. Align wall clip hole to wall anchor. Close the top cover to secure the cord in place.
d. Ensure holes of the provided wall clips are aligned with the wall anchors and insert provided screw.
Using a screwdriver, hand tighten a screw into each wall clip.