Keychron K6 Pro Wireless Custom Mechanical Keyboard User Guide
- June 4, 2024
- Keychron
Table of Contents
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.
Quick Start Guide
Connect Bluetooth
Press fn1 + Q (for 4 seconds) and pair with device named Keychron K6 Pro
Connect Cable
The VIA Key Remapping Software
Please visit caniusevia.com to download the latest VIA software to remap the
keys.
If the VIA software cannot recognize your keyboard, please reach out to our
support to get the instruction. (VIA only works when the keyboard is connected
by wire to the computer.)
The Layers
There are five layers of key settings on the keyboard. The layer 0 is for the
Mac system. The layer 1 is for the Windows system.
The layer 2 is for the Mac Multimedia keys. The layer 3 is for the Windows
Multimedia keys. The layer 4 is for the Function keys.
If your system toggle is switched to Mac, then the layer 0 will be activated.
If your system toggle is switched to Windows, then the layer 1 will be activated.
Multimedia Key and Function Key
Multimedia keys
Function keys
In order to get Multimedia Key, you need to press fn1 and Key.
In order to get Function Key, you need to press fn2 and Key.
The Backlight
Adjust The Backlight Brightness
Warranty
The keyboard is highly customizable and easy to be rebuilt. If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.
Watch The Building Tutorial On Our Website
If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.
Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
-
Try factory reset by pressing fn2 +J +Z (for 4 seconds).
-
Download the right firmware for your keyboard from our website.
Remove the power cable from the keyboard. -
Remove the space bar keycap to find the reset button on the PCB and switch the keyboard to cable mode.
-
Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
-
Flash the firmware with the QMK Toolbox.
-
Factory reset the keyboard again by pressing fn2 + J + Z(for 4 seconds).
- Step by step guide can be found on our website.
Not Happy
support@keychron.com
References
- qmk_firmware/keyboards/keychron at bluetooth_playground · Keychron/qmk_firmware · GitHub
- VIA
- How to use VIA to program your keyboard – Keychron | Mechanical Keyboards for Mac, Windows and Android
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>