ELVITA EIE200S In Ear Earphones User Manual
- June 15, 2024
- ELVITA
Table of Contents
ELVITA EIE200S In Ear Earphones
Product Information
Specifications
- Model : EIE200S
- Type : In-ear earphones
- Charging Port : USB-C
Product Usage Instructions
Pairing Earphones with Device
- Turn on the Bluetooth on your device.
- Open the charging case.
- Press and hold the case button for 5 seconds to enter pairing mode. Note that when the earphones have not been paired with a device before, they will automatically enter pairing mode.
- Go to Bluetooth settings on your device and select “EIE200S” to pair with your earphones. When the earphones are paired, the earphone icon will be shown on the device, and the LED icons on the case will flash for 3 seconds.
- If the pairing fails, the earphones will stay in pairing mode for 3 minutes and then turn off.
Turning On Earphones
- Open the charging case.
- Take out the earphones from the charging case and put them in your ears.
Turning Off Earphones
- Place the earphones in the charging case.
- Close the charging case. The earphones will automatically turn off, and an acoustic signal will sound.
Charging Earphones
- Place the earphones in the charging case.
- Connect the USB-C cable to the charging case.
- Plug the other end of the USB-C cable into a certified USB power output. The battery will be fully charged after approximately 1.5 hours, depending on the temperature and charger.
Troubleshooting
Charging Case
Charge the case before first use. The charging case displays the battery
level using LED indicators. One indicator represents 1% to 25% battery, two
indicators represent 50% battery, three indicators represent 75% battery, and
four indicators represent a fully a>longer lit. charged battery. Charge the
case when the LED indicators are no
Resetting Earphones
Reset the earphones if only one earphone connects to the phone and the
earphones cannot pair together.
- Place the earphones in the charging case and leave it open.
OVERVIEW
- A. Increase volume
- B. Decrease volume
- C. Voice assistant (Siri, Google etc)
- D. Play/pause
- E. Forward
- F. Backward
- G. Answer a call
- H. End a call
- I. Reject a call
- J. Voice assistant (Siri, Google etc)
- K. Charging case
- L. Case button (reset, BT pairing)
- M. Charging port
- N. USB-C charging cable
SAFETY
Carefully read the instructions before you install and use the product. Save the instructions and keep them near the product for future reference. All kinds of warranties shall be invalid if these instructions are not followed.
The model code is printed on the product.
DANGER!
- This product contains a lithium battery. If misused, opened or damaged, it can become a hazard and may explode.
- Do not attempt to burn the earphones. The battery could explode causing injury and death.
WARNING!
- Do not attempt to open, modify, disassemble, repair or in other way access the internal structure of the earphones. They are not user serviceable.
- Always handle the product with care and protect it from external damage.
- Clean your earphones using a soft dry cloth. Never use water, abrasive cleaning solvents, cleaning detergent, leather polish or other substances as they may damage your earphones permanently.
- Do not expose the product to extreme conditions such as very cold or hot temperatures, magnetic fields, fire, high voltage equipment, water or damp environments.
- Do not listen to music at high volume for prolonged periods of time. It can cause permanent damage to your hearing.
WARNING!
- The product contains small parts and are not suitable for children 3 years old and below.
- The earphones contain magnetic material.
- Should a battery cell leak, do not allow the liquid to come in contact with skin or eyes.
- Do not use your earphones in the immediate proximity (10 cm) of a pacemaker. Do not subject the earphones and included accessories to abnormal wear and tear.
- Do not expose the earphones to temperatures below -20 °C or above +45 °C.
- Do not charge the earphones in temperatures below 0 °C or above +45 °C.
- Do not use or store the earphones near a vehicle airbag due to risk of injury.
- Do not use earphones while driving, riding or walking through traffic areas.
- Do not drop, sit on or cause other unusual impact to the earphones.
- Do not use the earphones near water, bathtubs, sinks, saunas, pools, other liquids or moist areas.
CAUTION!
Any changes or modifications to this product not explicitly approved by the
manufacturer could void your authority to operate the equipment.
NOTE!
For the best possible experience, always use the product as described by the
manufacturer.
DANGER!
This product contains a lithium-ion battery. If misused, opened or damaged, it
can become a hazard and may explode.
WARNING!
Dispose of the used battery according to your local waste disposal authority.
The European Directive for batteries 2006/66/EC states that it is not
permitted to throw away batteries with household waste. They may contain
substances which are harmful to the environment. Empty batteries can be handed
over to local, public collection point or a local recycling centre.
Dispose of packaging in an environmentally friendly manner. Recycling
packaging, while observing national and local regulations, can reduce the
consumption of raw materials and the amount of waste in landfill sites.
This product complies with international directives, including but not limited
to WEEE Directive (2012/19/EU). The symbol on the product or on its packaging
indicates that this product should not be treated as household waste. Consult
your local waste disposal authority for guidance on how to properly recycle or
dispose of this product.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact the relevant municipal body in charge of waste management, your household waste disposal service or the store where you purchased the product.
USING EARPHONES
Pair earphones with device
You only need to pair the earphones once with a device. If the earphones have
been paired with a specific device once, they will automatically connect to
that certain device.
-
Turn on the Bluetooth on your device.
-
Open the charging case.
-
Press and hold the case button for 5 seconds to enter pairing mode.
NOTE! When the earphones have not already been paired with a device, they will automatically enter pairing mode. -
Go to Bluetooth settings on your device and select EIE200S to pair with your earphones. When the earphones are paired, the earphone icon is shown on the device, and the LED icons on the case flash for 3 seconds. If the pairing fails, the earphones will stay in pairing mode for 3 minutes and then turn off.
Turn on earphones
- Open the charging case.
- Take out the earphones from the charging case and put them in your ears.
- The earphones are automatically turned on, and an acoustic signal sounds.
NOTE!
- When the earphones are disconnected, an acoustic signal sounds, and they will automatically try to reconnect for 5 minutes.
- If the earphones do not turn on when the case is open, charge the charging case.
- When the battery voltage is lower than 20 %, the earphones make an acoustic sound every 10 minutes.
- When the battery voltage is lower than 3.1 V, the earphones turn off.
Turn off earphones
- Place the earphones in the charging case.
- Close the charging case.
The earphones are automatically turned off, and an acoustic signal sounds.
Charge earphones
- Place the earphones in the charging case. The LED indicator is lit for a few seconds and the earphones start to charge. The battery is fully charged after 1.5 hours.
NOTE!
- Charge the case when the LED indicators are no longer lit.
- The case stops charging the earphones when the case it runs out of battery.
- When charging, the LED indicators on the case show which earphone is currently charging. The first LED indicator on the left indicates that the left earphone is charging. The first LED indicator on the right indicates that the right earphone is charging.
Charge case
Charge before first use. The charging case displays the battery level for 5
seconds when opened. One indicator – 1 % to 25 % battery, two indicators – 50
% battery, three indicators – 75 % battery, and four indicators – fully
charged battery. Charge the case when the LED indicators are no longer lit.
- Place the earphones in the charging case.
- Connect the USB type-C to the case.
- Plug in the USB type-C to any certified USB power output.
The battery is fully charged after 1.5 hours, depending on the temperature and charger.
Reset earphones
Reset the earphones if only one earphone connects to the phone, and the
earphones cannot pair together.
- Place the earphones in the charging case and leave it open.
- Press and hold the case button for 10 seconds until the four LED indicators flash. NOTE!
- The reset is indicated by the LED indicator remaining lit for 3 seconds.
- If the reset fails, the LED indicators will flash 5 times and then turn off.
- Close the case and open it again. Now the earphones are reset.
TROUBLESHOOTING
Problem pairing and connecting
- Make sure the earphones are not connected to another device.
- Disable and enable Bluetooth on your device.
- Move the earphones closer to the device or alter their positions to avoid Bluetooth interference.
- Verify no other wireless equipment interfere with your earphones Bluetooth signal.
- If the earphones do not pair with each other, place the earphones in the charging case, close the lid and open again. Then take them out both simultaneously.
Problem with sound transmission
Move the streaming device to another position. Your body, distance, different
materials and other wireless equipment can interfere with the wireless signal
between your device and earphones.
TECHNICAL SPECIFICATIONS
- Bluetooth version 5.2
- Mic Yes
- Input DC5 V – 1 A
- Driver Ø 13 mm
- Frequency response 20 Hz-20 kHz
- Impedance 32 Ω
- Sensitivity 120±3 dB
- Bluetooth 2.402-2.480 GHz
- Transmit power +9 dBm
- Transmission range Max 10 m
- Total playtime 24 hour
- Earphones battery (each) 3,7 V / 45 mAh
- Charging time ≈ 1.5 hour
- Charging case battery 3,7 V / 400 mAh
- Working temperature -10 °C to 60 °C
- ENC Yes
EU Declaration of Conformity
This product fulfils the essential requirements and other relevant provisions
of Directive 2014/53/EU and all other EU directive requirements and carries
the CE mark. If not included with the product, a copy of the EU Declaration of
Conformity is available on request. This product has been evaluated to meet
general RF exposure requirements. It can be used in portable exposure
conditions without restriction.
Languages : en-GB, sv-SE, nb-NO, da-DK, fi-FI, is-IS
Publication date : 2023-11-01 T
The information may be subject to changes. Inadvertent errors in information may occur. This document and its content, including written material and images, are the property of Elon Group AB. You may not copy, reproduce, modify, republish or distribute this document or any of its content without express written permission from Elon Group AB. © 2023, Elon Group AB. All rights reserved.
Elvita products are distributed and marketed by Elon Group AB.
FAQ’s
What do I do if I find transport damage?
If you find transport damage, please contact the seller from which you purchased the product or the regional warehouse from which it was supplied .
What is the model code of the product?
The model code is printed on the product.
Can I make changes or modifications to the product?
No, any changes or modifications to this product not explicitly approved by the manufacturer could void your authority to operate the equipment. span
How long does it take to fully charge the earphones?
The earphones will be fully charged after approximately 1.5 hours, depending on the temperature and charger.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>